RFID 26 Bit Wiegand Shenzhen Access Control Reader

China RFID 26 Bit Wiegand Shenzhen Access Control Reader, Find details about China Shenzhen Access Control, RFID 26 Bit Wiegand from RFID 26 Bit Wiegand Shenzhen Access Control Reader

Model NO.
D1001A
Frequency
125kHz or 13.56MHz
Warranty
1 Year
Waterproof Rate
IP65
Door Open
by Card
Trademark
Dwell
Transport Package
1 PC Access Control Card Reader Per Box
Specification
100*46*20mm
Origin
Shenzhen, China
HS Code
8471900090
Model NO.
D1001A
Frequency
125kHz or 13.56MHz
Warranty
1 Year
Waterproof Rate
IP65
Door Open
by Card
Trademark
Dwell
Transport Package
1 PC Access Control Card Reader Per Box
Specification
100*46*20mm
Origin
Shenzhen, China
HS Code
8471900090

D1001A  5 to 10 cm short range 125 KHz or 13.56 MHz reader with wiegand 26, wiegand 34 protocol


Optional Model: 

D1001A-26/34, (Black Color, 125khz EM ID wiegand 26  and Wiegand 34 adjustable )

D1001A-M26/34,(Black color ,13.56mhz mf wiegand 26 and wiegand 34  adjustable)


Specification 

Wiegand 26bits/ Wiegand34bits Standard Format Data Output 

Less than 0.2 second Response Speed 

5-10cm Proximity Range 

Ambient Temperature: -25º C to 75º C 

Ambient Humidity: 10%-90% 

Built-in Antenna 

Built-in LED (Double Color LED) 

Built-in Loud Speaker (Buzzer) 

DC 9V-16V Working Voltage. Standard 12V, 70mA Working Current 

100 Meters Communication Distance 

Real Time Data Transfer 

With Water-Proof Function 

Audiovisual indication: When a registered card is presented to the reader, the red 

LED flashes green and the beep sounds. 

100*46*20(mm) 

Package:

100pcs per carton. Carton Size: 43.5*56*23(cm)

 

 

Packing List:

1*RFID Reader

 

Installation Description

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red DC 9V to 16V

Black GND

Green D0

White D1

Yellow BEEP

Blue   LED

Grey  Wiegand 26/Wiegand 34( defualt is Wiegand 26 bits, if you need weigand 34 function , connect Grey wire to GND)

Orange  Door Bell

Grown   Door Bell

 

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

Application 
RFID 26 Bit Wiegand Shenzhen Access Control Reader



Certification 
RFID 26 Bit Wiegand Shenzhen Access Control Reader


Access control card reader photo RFID 26 Bit Wiegand Shenzhen Access Control Reader
RFID 26 Bit Wiegand Shenzhen Access Control Reader

RFID 26 Bit Wiegand Shenzhen Access Control Reader
RFID 26 Bit Wiegand Shenzhen Access Control Reader