Automatic Wheel-Track Tester



Introduction:
This Automatic Wheel-Track Tester is based on the company's first-generation products that have been well received and upgraded to improve the next-generation products. At least 20 details have been improved in hardware, software and mechanical structure. Not only is the functionality and data processing capabilities significantly improved, but the reliability of the machine is further enhanced. It not only supports the original 0.7MPa standard road wheel tracking test, but also can complete the 1.4MPa heavy-duty traffic road wheel tracking test by adding optional accessories. At the same time, it can also complete some non-standard tests, and the adaptation range is greatly improved. Applicable standards: JTGE20-2011/T0719-2011. This series of products can be ordered by means of 2 or 3 wheels to suit the different requirements of users.



Main Technical Parameters::

Electrical parameters:

1. Power input: host: three-phase four-wire 380V ± 10%
2. Heater power: △ connection method, 1KW*3
3. Motor power: three-phase three-wire 750W
4. Maximum total power: no more than 4.5KW

1. Temperature resolution: 0.1ºC
2. Temperature measurement accuracy: initial accuracy ±0.5ºC(±0.1ºC after fixed point correction)
3. Temperature control accuracy (relative to temperature measurement point):

1. Temperature difference between different positions of the cabinet: after 60 minutes, the maximum temperature difference is 0.5ºC
2. Displacement measurement accuracy: 0.01mm
3. Displacement measurement resolution: 0.001mm
4. Round grinding speed: 21 round trips / min
5. Wheel surface hardness: 78±2 (60ºC)
6. Wheel rolling load: 0.7MPa±0.05MPa (factory adjustment)
7. Additional load: 0.7MPa (heavy load test)
8. Net weight: single wheel: 370Kg; double wheel: 500Kg; three wheels: 580Kg

Factory Show: