CE Approved Digital Elevator Rope Tension Meter with Software

Usage and Application for Elevator Rope Tension Meter:
Elevator rope tension tester is mainly used in elevator wire rope tension test . To check and adjust each wire rope of elevator in the process of installation, check before acceptance and annual inspection to ensure its tension as consistent as possible, thereby prolonging the service life of the traction wheel . The tension tester can also be applied to the bridge with sling, tower wiring,overhead wire ,index wire rope and other tension test.
 
Product features for Elevator Rope Tension Meter:
1.Portable:the tension tester use high-strength aluminum alloy structure with light weight and small size.It is easy to carry ,one person can complete all the operations. 
2. The instrument has stable performance and high accuracy,when the tested wire rope are consistent with wire rope tension tester data ,the measuring precision can be 5%.
3.Light weight ,simple structure,easy to operate,suitable for any occasion.
4. The instrument has 3 preset wire rope diameter model, just need to choose the correct wire rope number when measuring .
5.LCD display shows the value force,it is more convenient to reading. 
6. Three units:N,Kg and Lb can switch into each other .
7.The instrument can store 383 measuring data,the data can be output by computer.

ASZ Rope Tension Testing Instrument can be applied to various occasions, such as power industry, telecommunications industry, transportation industry, glass curtain wall decoration, ropeway industry, construction industry, pleasure grounds, tunnel construction, fishing, major research institutions and teaching institutions, testing institutions and other occasions involved with the tension of ropes and steel wire ropes.

Features
1. It has the rope structure with tension force, and can be measured directly without the need of being taken apart.
2. It has the light weight, simple structure, convenient operation, and applies to any situations.
3. It has the stable performance, high measurement accuracy, with automatic system compensation function. 
 When the specification of the tested rope is the same as the rope tension testing instrument rope number, the measurement accuracy can reach 2% error or less within the rated measurement range.
4. It has broader range of measurement, with 15 kinds of rope-diameter measuring functions.
5. Applied range: applied to flexible, stretched ropes, such as various steel wire ropes, high-strength ropes, etc.
6. Accuracy grade: 2~6% of maximum function (depending on the rope form and features).
7. Rope Diameter: ¢6~¢40mm.

HD Digital pressuremeter tension tester
Digital pressuremeter tension tester is a kind of special equipment to measure wind towers, signal transmission and power transmission systems rope tension. It has characters of high precision, easy to operate, easy to carry, etc. also it has many kinds of test modes, convenient to testing. Users can also input gravity acceleration value to make the test more accurately.
Function Characteristics

1. High precision, high resolution.
2. Five kinds of test modes, three kinds display modes---To improve test efficiency to the greatest extent.
3. N (Newton), kg (kg), lb (lb) three testing units for selection, mutual conversion.
4. Gravity acceleration setting function---Users can input the precise gravity acceleration value of testing place, make the testing and unit conversion more accurate.
5. Peak holding function---Maintain peak display until manual reset.
6. Automatic peak function---Maintain peak value can be removed automatically after 2 seconds.
7. Can set upper and lower limit value to make statistical analysis, the value more than comparative value, the alarm buzzer will alarm.
8. Data stored function, we can store 896 test values.
9. 10 minutes without operating automatic shutdown, green initiative.
10. High quality charging power,charge voltage from 240V to 100V, can adapt to domestic and foreign most areas,also have short circuit, leakage, overload protection function.
11. 2 sets of installation dimensions, adapt to domestic and foreign most test machines,convenient to installation and using.
12. Six digit Big screen display.

Q1: Why Choose NANBEI ?
(1).Professional manufacturer with more than 13 years experience
(2).Exported to more than 97% Countries
(3).Turnkey Solution is no problem

Q2:OEM,ODM acceptable or not?
Absolutely Yes

Q3:What's kind of Payment terms for customer choosing?
T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...

Q4:Can you visit your factory online?
Absolutely no problem

Q5:Can online video inspection before shipment?
Absolutely no problem

Q6: what's the MOQ ? Sample order is OK?
MOQ:1 set, sample order is no problem

Q7:What's kind of shipment for customer choosing?
Usually ship by sea, by air, by international express .
We can also provide reasonable solutions according to your transportation requirements

Q8:How to ensure product quality and after-sales service?
We have CE, ISO quality certificate, and SGS authentication.

After-sale service:

1. Warranty : 1 year
2. We supply free part for quality problem in warranty
3. Long life technical support and service