Metallurgical Chemical Rotary Kiln

China Metallurgical Chemical Rotary Kiln, Find details about China Light Soda Ash Kiln, Chemical Kiln from Metallurgical Chemical Rotary Kiln

Port: Shanghai, China
Transport Package: Suitable for Long Distance and Sea Transportation
Payment Terms: L/C, T/T
Certification: ISO 9001:2008
Condition: New
Customized: Customized
Trademark: CIC
Origin: China

Introduction:

Chemical rotary kiln is a common building material equipment. In addition to its wide application in the chemical industry, it also plays an important role in the field of metallurgy and building materials. The technology content of this equipment is very high, so its application is only for users. It will be simpler and more convenient, and there will be no noise during the work. It is a calcining equipment with low energy consumption and strong environmental protection.

Metallurgical Chemical Rotary Kiln
 

Working Principle:

The principle of using the chemical rotary kiln is to transfer the material to the chemical rotary kiln by means of our bucket elevator conveyor and other equipment, and then carry out a certain process of reverse calcination. However, in this process, we must keep constant the speed in order to reach calcination purpose.

The specific operation situation is as follows: the chemical rotary kiln cylinder has refractory brick lining and heat exchange device, which rotates at low speed. The material and the hot flue smog are generally countercurrent heat exchange, and the material is added from the high end of the kiln. cylinder is installed obliquely ,during the rotation, the material in the kiln moves in the axial direction while rotating, and the burner sprays the fuel at the low end, and smog is discharged at the high end. The material is heated during the movement and undergoes physical and chemical changes to become a qualified product that is discharged at the low end.

Metallurgical Chemical Rotary Kiln
 

Characteristics

1. Supporting device: it's main axle adopts advanced structure, equipped with automatic temperature measuring device and electric heating device, and also supply flow support for selection.

2. Thrust roller: It is divided into two types: mechanical thrust roller and hydraulic thrust roller. The hydraulic roller is equipped with advanced hydraulic control system.

3. Transmission: The chemical rotary kiln is equipped with single or double transmission. DC motor or variable frequency speed control motor controls the speed, with reliable operation, energy saving and high efficiency features.

4. Sealing device: The chemical rotary kiln has various sealing forms according to the different design of the kiln type. Cylinder compression face seal, spring compression face seal, heavy weight graphite block seal, spring graphite block seal, fish scale labyrinth seal, axial labyrinth seal and above-mentioned combination seal, etc., which are characterized at Strong adaptability by control swaying and swinging the cylinder and good sealing effect.

Metallurgical Chemical Rotary Kiln
 

Installation and maintain:

1. The installation of chemical rotary kiln requires us to pay attention to its base surface, and it should be installed in parallel in general condition.

2. When the chemical rotary kiln is being installed, a certain inspection on the rotary kiln is necessary, which is to make sure the equipment in safety.

3. After the chemical rotary kiln is installed, it is necessary to carry out the no-load test, which can ensure the safety performance of the chemical rotary kiln .

Metallurgical Chemical Rotary Kiln
Metallurgical Chemical Rotary Kiln
Metallurgical Chemical Rotary Kiln
 

Technical Parameters:

Specification

Capacity

Design Pressure(Mpa)

Design Temperature(ºC)

Work Pressure(Mpa)

Work Temperature(ºC)

m

t/d

Tube

Shell

Tube

Shell

Tube

Shell

Tube

Shell

φ2.5×27

400

3.53

Normal Pressure

270

200

3.2

Normal Pressure

238

200

φ2.8×27

520

3.53

Normal Pressure

270

200

3.2

Normal Pressure

238

200

φ3×30

660

3.53

Normal Pressure

270

200

3.2

Normal Pressure

238

200

φ3.2×32

800

3.53

Normal Pressure

270

200

3.2

Normal Pressure

238

200

 

Specification

Heat Exchange Area

Installation Inclination

Main Motor Power

Speed Rate

Main Drive

Slow Speed Drive

Net Wt.

Max Wt. With Filler

Product Features

m

M2

%

kw

r/min

r/min

r/min

kg

kg

φ2.5×27

≥2500

2

160

980

7

0.4

198000

250000

Light Soda Ash

φ2.8×27

≥3100

2

160

1480

6.32

0.3

228000

270000

Light Soda Ash

φ3×30

≥3600

2

220

1480

5.9

0.25

300800

350000

Light Soda Ash

φ3.2×32

≥4000

2

310

1480

5.47

0.26

350000

395000

Light Soda Ash