High Efficiency China Manufacture for Manganese Oxide, Active Lime, Active Carbon Double Chamber Lime Kiln, Find details about China Lime, Machinery from High Efficiency China Manufacture for Manganese Oxide, Active Lime, Active Carbon Double Chamber Lime Kiln
Process characteristics of double chamber shaft kiln:
The stone is loaded from the top of the kiln, and the fuel is fed into the upper part of the kiln. The spray guns located at the bottom of the pre-tropical zone are evenly distributed across the section of the kiln. The combustion-supporting air is fed from the upper part of the shaft kiln. The combustion-supporting air is preheated in the preheating zone before mixing with the fuel, and then the calcining flame gas flows through the calcining zone and flows co-currently with the ore to obtain the ore. The calcined waste gas is discharged to the top of the kiln along the preheating belt of the other kiln through the passage connecting the two kilns. Due to the long process of parallel calcination, the lime quality is very good, and due to the alternate operation of the two kilns, the waste gas directly preheats the ore, and the heat is fully utilized, so the unit heat consumption is lower in various kilns.
Product features:
1. Parallel calcination: This is the technical feature of the double-chamber shaft kiln. Because the high temperature flame contacts the lower temperature material, the heat exchange rate is very high, and the relatively low temperature hot gas contacts the material to be burned. Avoiding over-firing and under-firing, the roasted product has better quality, higher activity, up to 360ml or more, and less residual CO2, generally not higher than 2.5%;
2. High heat utilization rate: Due to the heat storage heat exchange system, high-temperature exhaust gas is discharged through the preheated kiln, and after a long time of heat exchange, the heat is transferred to the material, and the waste heat is fully utilized, thus achieving the purpose of energy saving . The heat consumption per unit product can reach 850kcal/kg, which is relatively low among all existing kiln types;
3. The exhaust gas temperature and dust content are low: the exhaust gas temperature is very low due to the sufficient heat exchange between the exhaust gas and the material, the exhaust gas temperature is 90-130°C under normal conditions, and the dust concentration in the exhaust gas is generally 5-8g/m³ , It is easy to take waste gas purification treatment measures, which is beneficial to reduce environmental pollution;
4. Uniform heat supply: 2×33 burners are evenly distributed inside the kiln, each burner provides heat to the same range of the kiln space, so that the heat supply on the kiln section is even, which is conducive to the uniform and stable roasting of the product;
5. Convenient quality inspection: There are 2×8 quality inspection doors under the kiln, and the fuel supply of the corresponding burner can be adjusted to ensure the quality by checking the product quality of each part;
6. Reliable equipment: Most of the equipment on the shaft kiln adopts hydraulic operation, and the operation is stable and reliable. These equipments include: air and exhaust gas reversing gate, chimney exhaust gas reversing gate, kiln closing gate, feeding hopper gate, discharge device, discharge hopper sealing gate and material level indicator, etc.;
7. The kiln body has good heat insulation performance: the surface temperature is low, which not only protects the environment but also saves energy.
No | Project Name | Parameter value |
1 | Lime Grade | Premium |
2 | Capacity,T/D | ≥600 |
3 | Calcining thermal principle | Cocurrent calcination and countercurrent heat transfer |
4 | Lime activity,ml | >350 |
5 | Raw material size,mm | 40~80 |
6 | Fuel type | Gas |
7 | Average fuel consumption | ~2616Nm³/h· Set |
8 | Fuel calorific value | 8600kcal/Kg |
9 | Operating days per year | 335 Days |
10 | Calendar job rate | 94% |
11 | Heat consumption per unit product | ≤850KCal/kg |
12 | Power consumption per unit product (main equipment) | 45kW·h/t |
13 | Power consumption per unit product (comprehensive power consumption) | 55kW·h/t |
14 | Product CO2 residual amount | ≤1.5% |
15 | Product CaO content | ≥90% |
16 | Exhaust dust concentration | ≤30mg/Nm3 |
17 | Area | -- |
We have developed long and good relationship with many shipping agents.
Ocean freight partners are: APL, COSCO, OOCL, CSCL, MSC, etc. and train shipping is also available.
The perfect shipping way and best service with lowest price are always provided for customers.
Shandong Tianhang Machinery Equipment CO.,LTD is a new high-tech private enterprise attached to Shandong Tianhang Group. It has more than 150 employees, including 52 engineering technicians,34 with Intermediate Certificate. Covering an area of more than 22,000 square meters, the company is composed of machining, riveting welding, assembly and other workshops. With 110 sets of advanced equipment, advanced processing equipment, large processing range, high precision products. Since the establishment of the enterprise, the implementation of high starting point, high quality strategy, in China, we have finished equipment intelligent transformation and technical optimization to kind of complete project fromφ3200 toφ5300 vertical lime kiln ,its performance reliable, quality reliable, operation simple. With its advantages of advanced technology, reliable quality, considerate service and favorable price, Tianhang has become a lime kiln equipment manufacturing base, and products are sold all over the world and widely praised.
1.Save energy
2.The shell of kiln use four layer refractory in vertical masonry, good effect of thermal insulation.
3. Long service life of refractory
4. Less cover area
Our service:
Training & Service
Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment,
according to your special demand.
Sale services: servant
Send technicians to the jobsite for guiding the installation and adjustment, training operators
and finishing the check and accept together with you.
After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
Welcome to visit our company and workshop, we sincerely look forward to cooperating with
you. We will provide you with the most suitable products with the reasonable price.
1.Why us?
We provide professional industrial furnace and industrial design as customer order.
2.How is the quality of your products?
Our products are manufactured strictly according to national and international standard, and we take a test on every product before delivery.
3.Guaranteed?
If products' quality is not consistent with the description as we described or the promise before you place order, we promise 100% refund.
4.How about price?
Yes, we are factory and be able to give you the lowest price than market one, and we have a policy that " for saving time and absolutely honest business attitude,we quote as low as possible for any customer, and discount can be given according to quantity".