Name:HENGFENGTAI Shaft Mounted Gear Reducer with Bushing and Backstop

Models:HXGF30,HXGF40,HXGF50,HXGF55,HXGF65,HXGF75,HXGF85,HXGF100

Hengfengtai Shaft Mount Reducers HXGF series are manufactured in eight gear case sizes, from 30 to 100, nominal gear ratios are 5: 1, 13: 1 and 20:1. A very wide choice of final driven speeds can be determined by the use of an appropriate input Wedge Belt Drive.
The units will normally be oil lubricated, but they are equally suitable for long life synthetic lubricants.

Dimension

Flange Mounted

Shaft Mounted

Mounting Poisition

Satisfactory performance depends on proper installation lubrication and maintenance. Therefore it is important that the instructions in the installation and maintenance leaflet,supplied with each gearbox, are followed carefully. Some of the important aspects of belt and torque-arm installation are listed below.
1. Install pulley on gearbox input shaft as close to the reducer as possible, and mount reducer on driven shaft as close to bearing as practical See Figure 1. Failure to do this will cause excess loads in the input shaft bearings and output bearings and could cause their premature.
2. Install motor and wedge belt drive with the belt pull at approximately 90 to the center line between driven and input shafts(See Fig. 2). This will permit tensioning of the wedge belt drive with the torque arm which should preferably be in tension. If output hub runs anti-clockwise,torque arm should be positioned to the right( See Fig 3)
3. Install torque-arm fulcrum on a rigid support so that the torque-arm will be at approximately right angles to the center line through the driven shaft and the torque arm case bolt(See Fig 4). Make sure there is sufficient take up in the turnbuckle for belt tension adjustment.


 

Hengfengtai enterprise had 3 sub companies as follows: Zhejiang Hengfengtai Reducer MFG Co., Ltd (located in Binhai Industry Zone, mainly produce gear reducer), Wenzhou Hengfengtai Competely Equipment MFG Co.,Ltd (located in Sanxi Industry Zone, mainly making mixer agitator and thickener equipment etc.) and Zhejiang Heng fengtai Technology Development Company- preparing(located in Binhai Industry Zone, mainly making precision transmission, solar thermal power tracking system, electrolytic aluminium equipment, tea processin equipment etc.). 

 

              Hengfengtai Binhai Industrial Park                                                                    Hengfengtai Sanxi Industrial Park
 

Products benefits: 

1. High efficiency
2. Small volume 
3. strong capacity of being overloaded
4. Long service life 
5. Anti-leaking oil 
6. simple structure and convenient to be installed and maintained 
7. Widely application