Products

Push Pull Pickling Line - 1450 mm Wide 80-150 Mpm Speed

China Push Pull Pickling Line

Model NO.
customized pickling line
Process Method
Push-Pull Shallow Trough Turbulence Hydrochloric a
Apu Layout Direction
Left to Right When Seating at Operation out Board
Max. Process Speed
70-150m/Min
Process Speed in Changing Coil
50-60m/Min
Point Move Speed
10-30m/Min
Transmission Way
AC Driving System, Speed Regulated by Variation
Acid Concentration Max
200g/L HCl, 125g/L Fe2+, 5 G/L Fe3+
Fluorine Content in Acid
Less Than 4ppm
Minimum Pickling Time
26s
Acid Trough Length in Total: About
50m
Trademark
Moran or customized
Transport Package
Plastic Film/Plywood Box / as Clients′ Required
Specification
it depends on the specification
Origin
Hebei, China
HS Code
722100000
Model NO.
customized pickling line
Process Method
Push-Pull Shallow Trough Turbulence Hydrochloric a
Apu Layout Direction
Left to Right When Seating at Operation out Board
Max. Process Speed
70-150m/Min
Process Speed in Changing Coil
50-60m/Min
Point Move Speed
10-30m/Min
Transmission Way
AC Driving System, Speed Regulated by Variation
Acid Concentration Max
200g/L HCl, 125g/L Fe2+, 5 G/L Fe3+
Fluorine Content in Acid
Less Than 4ppm
Minimum Pickling Time
26s
Acid Trough Length in Total: About
50m
Trademark
Moran or customized
Transport Package
Plastic Film/Plywood Box / as Clients′ Required
Specification
it depends on the specification
Origin
Hebei, China
HS Code
722100000
General introduction of Push Pull Pickling Line - 1450 mm wide 80-150 mpm speed

This production line is push-pull Acid Pickling Unit, which adopts the most advanced Shallow Trough Turbulence Acid Pickling technology. The equipment and technology provided are reliable advanced mature whole set equipments and technology that could fulfill the buyer's need of steady production and long-term running which are proved by actual production. This technology is featured by reasonable structure, high efficiency, low consumption, convenient operation, fewer malfunctions.
Push Pull Pickling Line - 1450 mm Wide 80-150 Mpm Speed
Design basis
Raw Material

Cold rolled carbon structural steel, high quality carbon structural steel and low alloy steel coil
type of steel: Q195, Q235 ,ST12 ,ST13, SPCC ,SPCD20#.
Hot belt temperature≤55 Degree  Centigrade  
Yield strength: 210~360N/mm2
Tensile strength: 270~610N/mm 2

Push Pull Pickling Line - 1450 mm Wide 80-150 Mpm Speed

Specification:    
the thickness of steel: 2.0~~3.5mm
the width of the steel: 650~750mm
Inner diameter of coils to be pickled: Φ610mm/Φ760mm
Inner diameter of coils after being pickled: ф508mm
                       min Φ900mm
coil inner diameter:      max Φ1800mm
                          min Φ900mm
coil unit weight          max  13t
annual work plan:        300 days*24 hours
Energy: water, electricity and vapor
Product form: coils one after another
Production capacity:             200000tons/ Year 
Specification:    
the thickness of steel: 2.0~~3.5mm
the width of the steel: 650~750mm
Inner diameter of coils to be pickled: Φ610mm/Φ760mm
Inner diameter of coils after being pickled: ф508mm
                       min Φ900mm
coil inner diameter:      max Φ1800mm
                          min Φ900mm
coil unit weight          max  13t
annual work plan:        300 days*24 hours
Energy: water, electricity and vapor
Product form: coils one after another
Production capacity:             500000tons/ Year

Push Pull Pickling Line - 1450 mm Wide 80-150 Mpm Speed

Process and equipments


coil loading car(1,2)  decoiler units(1,2)  decoiling scraper(1,2)  Five roll leveler(1,2) crop shear1# tensioner 1#Vertical guide roller pickling1 pickling 2 pickling 3pickling 4washing 1washing 2washing 3washing 42# vertical guide roller blowing machine  Hot air dryer automatic CPC2# Tensioning machine shearing machine steeringpinch roller Coiler unit (EPC)   outlet coil unloading trolley

Our advantage:
1) Customized Production 
2) High cost-effective product
3). All-around pre-sales & after-sales services
4) Independent intellectual property rights
Our advantage:
1) Customized Production 
2) High cost-effective product
3). All-around pre-sales & after-sales services
4) Independent intellectual property rights
Push Pull Pickling Line - 1450 mm Wide 80-150 Mpm Speed
Push Pull Pickling Line - 1450 mm Wide 80-150 Mpm Speed
Push Pull Pickling Line - 1450 mm Wide 80-150 Mpm Speed

Hebei Moran provides the customers with all-around, high value-added pre- sales & after-sales services. Factory design, selection of utility & auxiliary facilities, unit process layout, civil foundation design reference, as well as the well-rounded training combined with theory and hands-on exercises for line operators and maintainers, all are freely available.
For More information, Please feel free to contact us!



 

You Might Also Like