DIN 50021 Salt Spray Corrosion Salt Chamber

Product Introduction:

Corrosion Resistant Salt Spray Chamber is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion treatment for a variety of materials, corrosion resistance of their products.


Specification

Special Features:


HMI+PLC in one unit
Door open and Door close alarm system.
Inbuilt calibration system.
Less use of Electrical and Mechanical Components on the Top and Bottom of Chamber - Provides easy maintenance of chamber, increases durability because of proper air circulation; cooling systems kept at bottom of the chamber to provide proper environment for compressor.
Circulation Fan with Variable Speed 
Electrical efficiency
Variable speed motor saves money by reducing energy bills, as it consumes less electricity than conventional motor.
Cooling Efficiency
Variable speed enables gaining air conditioning efficiency or SEER.
Air Quality
Variable speed motor helps clean the air efficiently. When the fan is in constant operation (indicated by the "Fan" setting on thermostat), the motor continues to slowly circulate air, allowing filters to capture more contaminants.
Humidity Control
Variable speed motor combined with a Thermostat allows controlling the amount of humidity.
Quieter Operation
Variable speed blower motor are significantly quieter thanits single-speed counterpart.
Digital Output - Target and Performance Output of the chamber operations are in digital format(digits) giving precise reading.
Pre - Attached Data Logger with Data Analysis Software - Primary benefits of using data loggers is to automatically collect data 24-hour basis.Graph and table format of results can be produced automatically by the data logging software.
Self - Calibration System - WEIBER incorporate a self-calibration system, in each chamber,that is completely automatic to prevent errors that could result from failure to calibrate. The system continuously monitors the environment, sensing changes that could affect analysis, and re-calibrates accordingly using a built-in long-life calibrator The process takes just a few seconds, without operator intervention or additional supplies, quickly optimizing system parameters for the current conditions.
Open and Close Updates Through Mobile Network - Mobile technology has the potential to make services more flexible and keep informed, information anywhere at any time from mobile device, and can set alert system to know whether or not the chamber is being used.
Reliable - Construction, performance mechanism, controls and information system integration makes the equipment reliable.
Precise Control of Environmental Parameters - The set/ programmable parameters of the chamber are precise or have less deviation from original value,thus ensuring correct measurement.
Micro - Processor Based Controller - Microprocessor based controller enablesprecise control of temperature, humidity, pressure and other values. Benefits:
Processing speed is high
Provides flexibility to alter the system by changing software.
Compact in size.
Operation and maintenance easier.
Maintain precise values
Aesthetically designed - Designed according to the standards and principles underlining industry's aesthetic values.
Corrosion Resistant interior and exteriors - Corrosion resistant coatings like epoy coatings are applied inside and outside the chamber to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
Energy Efficient - WEIBER chamber uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving chamber.
Sturdy Construction - WEIBER chambers are built with robustness to withstand stress and strain, giving the chamber long life and ability to perform in extreme stress environments.
Low Maintenance - WEIBER systems benefit inretaining proper functionality over long period of time.
Light Weight: Compact and superior materials ensure the chamber be light weight

Application

Automotive industry
Electronics industry
Aviation and space industries
Material and substance

Standard

ASTM B117   DIN 50021
DIN 9227     EN 9227
ISO 9227.    BS ISO 16539:2013
BS 7479:1991, ISO 9227:1990
BS 5466-1:1977, ISO 3768-1976

CUSTOMER DEFINED.Company Advantage
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
Ø  ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VD

Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair