Performance Venturi Wet Scrubber for Waste Gas Treatment Gas Scrubber

China Performance Venturi Wet Scrubber for Waste Gas Treatment Gas Scrubber, Find details about China Gas Removal Scrubber, PP Wet Scrubber from Performance Venturi Wet Scrubber for Waste Gas Treatment Gas Scrubber

Basic Info.

Model NO.

D-1000

Air Volume

2000-30000m2

Air Velocity

0.8-1.2m/Min

Application

Cement Plant, Steel Plant, Power Plant....

Trademark

Transport Package

Container

Specification

D-1500

Origin

China

HS Code

8421392990

Model NO.

D-1000

Air Volume

2000-30000m2

Air Velocity

0.8-1.2m/Min

Application

Cement Plant, Steel Plant, Power Plant....

Trademark

Transport Package

Container

Specification

D-1500

Origin

China

HS Code

8421392990

Product Desciption

WET SCRUBBER

Product Description

A wet scrubber is a simple method to clean exhaust air or exhaust gas and remove toxic or smelling compounds. In the flue gas scrubber, the gas gets in close contact with fine water drops in a co-current or counter current flow. This method is more effective when the water drop size gets smaller and the total surface between water or washing fluid and the gas gets larger. The water or washing fluid is recirculated normally in order to save water and reduce the amount of waste water.

PP Wet Scrubber is used for removal of gas, vapors, chemical mist etc. these scrubbers are cylindrical towers and are packed with plastic tower packing or any other suitable packing for particular application. The scrubbers are provided with water spraying arrangement which can be supplied in various sizes with gas velocities ranging from 0.5m/sec to 2m/sec and pressure drop between 50 mmwg and 750 mmwg pumps/gaseous contaminates travel vertically upwards while caustic liquid/water is sprayed from top, over the tower packing. Td he liquid is recirculated with pump. Additionally, packed bed scrubbers offered, mostly counter current scrubbers, which can collect efficiently particulars up to a size of 4-5 micron. Packed towers are used as contacting equipment for gas-liquid system. It presents a cross section of a typical unit. The shell is usually cylindrical/although square wooden, light metal or reinforced plastic towers are used.

The basic unit consists of:

Shell
Packing (One or more sections)
Packing supports (s)
Liquid distributor (s)
Intermediate supports and redistributors
Gas and liquid entrance and exit nozzles
Pump for liquid circulation

Product Paramaters :

Model	Air volume	Pump out/in pipe diameter	Power	Weight
(mm)	(m³/h)	(mm)	(kw)	(kg)
φ800*3500	2000-3000	32/25	0.75	200
φ1000*4000	4000-5000	40/32	1.5	450
φ1200*4000	6000-8000	40/32	1.5	600
φ1500*4200	10000-15000	50/40	2.2	800
φ2000*5000	20000-25000	65/50	4	950
φ2500*6000	30000	80/65	5	1200