Semi-Automatic Pet Bottle Blow Molding Machine for Small Bottle
China Semi-Automatic Pet Bottle Blow Molding Machine for Small Bottle, Find details about China Bottle Making Machine, Bottle Blowing Machine from Semi-Automatic Pet Bottle Blow Molding Machine for Small Bottle
Basic Info.
Model NO.
FL
Bottle Material
Pet Plastic
Suitable Bottle
Pet Bottle
Machine Type
Semi Automatic
Processing Type
Stretch Blowing
Capacity
800bph-1200bph
Bottle Volume(Ml)
100ml-2L
Cavity
2, 4
Trademark
FILLEX
Transport Package
Packed in Wooden Case
Specification
Stainless Steel
Origin
Zhangjiagang Jiangsu China
HS Code
8422301090
Model NO.
FL
Bottle Material
Pet Plastic
Suitable Bottle
Pet Bottle
Machine Type
Semi Automatic
Processing Type
Stretch Blowing
Capacity
800bph-1200bph
Bottle Volume(Ml)
100ml-2L
Cavity
2, 4
Trademark
FILLEX
Transport Package
Packed in Wooden Case
Specification
Stainless Steel
Origin
Zhangjiagang Jiangsu China
HS Code
8422301090
Product Desciption
Semi Automatic High Speed PET Bottle Blow Molding Machine
Semi Automatic PET Bottle Blow Molding Machine:
2. Suitable to produce 0.1 ~ 1.5L Standard neck PET container
3. Easy to operate,only need one operator.
4. Mold easy to replacement .
5. Suitable for different preform neck size, it can change preform jigs very easily.
6. The machine is more safety and stabilization.
7. Advanced PLC control system with a use-friendly control panel
8. Powerful heating unit with precision controller and convenient adjusting mechanism.
9. The heating lamp not easy to damage.It no need frequently to change lamp. The lamp life is long.
10. Oven design in reasonable, adopt air cooling. Suitable for hot environment to work, make sure the preform neck notdistortion.
11. Equipped with special designed air storage unit
12. Compact design that saves space
13. Simple installation & start up operation
Applications Of Bottle Blow Molding Machine:
Advantages Of Bottle Blow Molding Machine:
1 - High degree of automation and intelligence
2 - Excellent and stable product quality
3 - High output: output 1200 bottles / hour
4 - Low energy consumption: reduced air consumption and power consumption
5 - High hygiene, no intermediate pollution
6 - Lower production costs
7 - Good visibility, maintainability and safety
Process Flow Chart Of Bottle Blow Molding Machine:
3 - High output: output 1200 bottles / hour
4 - Low energy consumption: reduced air consumption and power consumption
5 - High hygiene, no intermediate pollution
6 - Lower production costs
7 - Good visibility, maintainability and safety
Process Flow Chart Of Bottle Blow Molding Machine:
Semi Automatic Bottle Blow Molding Machine | ||
Model | FL-1000 | |
Output | Based on bottle shape | 800-1200PCS/H |
Product Specifications | Diameter range | 15mm-50mm |
Container diameter | 20mm-100mm | |
Container height | 50mm-450mm | |
Mold Specifications | Cavity | 2 cavity |
Mold thickness | 100mm~250mm | |
Mold effective area | 480mm*340mm | |
Machine Power | Power Voltage | 380v 3Phase /220v 3Phase 50/60HZ |
Installed power /Actual power | 16kw/10kw | |
Air Source | High pressure air compressor | 1.2m³/min 30Kg |
Air dryer | 2.0m³/min 30Kg | |
Blowing machine size | Length*width*height/weight | 1590*615*1570mm/650kg |
Preform loader size | Length*width*height/weight | 1700*565*1360mm/350kg |
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Characteristics Of Bottle Blow Molding Machine:
Simple operation and precise control
The FL-1000 semi automatic bottle blow molding machine is controlled by a microcomputer control system. The whole process is completed automatically through the program, the control accuracy reaches 0.01 seconds, the fast response time guarantees the final quality of the bottle.
Simple and convenient driving system
The pneumatic system provides power for the movement of the machine. The FL-1000 semi automatic bottle blow molding machine uses world-renowned pneumatic components to reduce noise, save energy and provide stable performance.
Superior performance of the mode-locking system
The FL-1000 semi automatic bottle blow molding machine uses a three-template clamping system, which provides a powerful clamping force and meets the requirements of up to 35 pa blow pressure. It is equipped with a adjusting device to adjust the distance between the front and middle formwork and the position of the drawing cylinder according to the installation of different moulds.
Reliable safety device
In order to ensure the safety of the machine and operators, the FL-1000 semi automatic bottle blow molding machine has two start switches installed on both sides of the machine, which can only start the machine when pressed at the same time. In addition, there is an emergency stop switch to stop the machine in case of emergency failure.
The FL-1000 semi automatic bottle blow molding machine is controlled by a microcomputer control system. The whole process is completed automatically through the program, the control accuracy reaches 0.01 seconds, the fast response time guarantees the final quality of the bottle.
Simple and convenient driving system
The pneumatic system provides power for the movement of the machine. The FL-1000 semi automatic bottle blow molding machine uses world-renowned pneumatic components to reduce noise, save energy and provide stable performance.
Superior performance of the mode-locking system
The FL-1000 semi automatic bottle blow molding machine uses a three-template clamping system, which provides a powerful clamping force and meets the requirements of up to 35 pa blow pressure. It is equipped with a adjusting device to adjust the distance between the front and middle formwork and the position of the drawing cylinder according to the installation of different moulds.
Reliable safety device
In order to ensure the safety of the machine and operators, the FL-1000 semi automatic bottle blow molding machine has two start switches installed on both sides of the machine, which can only start the machine when pressed at the same time. In addition, there is an emergency stop switch to stop the machine in case of emergency failure.
Strong heating permeability
FL series heating device adopts infrared lamp tube as heating element. Infrared ray has strong thermal radiation, which can heat the bottle embryo to the required temperature in a short time. The patented baking passage heating unit specially designed for the thick-wall bottle embryo can optimize the energy consumption of the lamp tube and improve the penetration of infrared ray to ensure the continuous uniform heating on the surface and inside of the bottle embryo.
Bottle embryo cooling guarantee device
Air cooling and water cooling pipes are arranged in the embryo drying path of the FL-1000 semi automatic bottle blow molding machine to cool the mouth of the bottle embryo and ensure that the neck of the bottle embryo will not be deformed by heat during the heating process.
Multidirectional lamp tube adjusting bracket
The multidirectional lamp tube adjusting bracket is installed on the bottle embryo heater to enhance the compatibility of the drying passage to the bottle embryo. The rack can easily change the height and width of the drying path according to the different size and height of the bottle mouth. The size of the vent can also be adjusted according to different needs.
Auxiliary equipment
The FL-1000 semi automatic bottle blow molding machine has many auxiliary devices, such as the storage device to ensure the stability of air pressure, the lubrication device to reduce the loss of all parts of the machine, and the multiple intake device to meet the high pressure compressed air single intake mode and high pressure & low pressure compressed air double intake mode.
Bottle embryo cooling guarantee device
Air cooling and water cooling pipes are arranged in the embryo drying path of the FL-1000 semi automatic bottle blow molding machine to cool the mouth of the bottle embryo and ensure that the neck of the bottle embryo will not be deformed by heat during the heating process.
Multidirectional lamp tube adjusting bracket
The multidirectional lamp tube adjusting bracket is installed on the bottle embryo heater to enhance the compatibility of the drying passage to the bottle embryo. The rack can easily change the height and width of the drying path according to the different size and height of the bottle mouth. The size of the vent can also be adjusted according to different needs.
Auxiliary equipment
The FL-1000 semi automatic bottle blow molding machine has many auxiliary devices, such as the storage device to ensure the stability of air pressure, the lubrication device to reduce the loss of all parts of the machine, and the multiple intake device to meet the high pressure compressed air single intake mode and high pressure & low pressure compressed air double intake mode.
You Might Also Like
20 Inch Industrial Big Blue RO Water Filter
Wholesale Quantum Board 220W LED Grow Light for Grow Tent
Gl-II 200m Water Well Drilling Rig Wells Drilling Machine
Hot Sale Product 2021 DC Current Motor Arc Welding Machine O......
Sodium Stearoyl Lactylate ( SSL /CSL)
PC200-6 Excavator Hand Throttle Controller Manual 7834 -27-2......
Sound DJ Bass Speaker SA208b (DSP) PA Speaker System Profess......
Plastic LED Furniture Big Lamp for Nightclub
Kids Silicone Bowl Cup Baby Plastic Food Feeding Bowl
49S CRYSTAL RESONATOR 4.000MHz
Blr/Ek- 053s Refrigeration Line Filter Drier