CNC Bridge Gantry Milling and Grinding Machine Two in One
China CNC Bridge Gantry Milling and Grinding Machine Two in One, Find details about China CNC Vertical Milling Machine, Vertical Milling Machine from CNC Bridge Gantry Milling and Grinding Machine Two in One
Basic Info.
Model NO.
3020
Automatic Grade
Automatic
Precision
High Precision
Certification
GS, CE, RoHS, ISO 9001, Ks (South Korea)
Condition
New
After-Sales Service
Excellent After-Sales Service
Warranty
One Year
Cutting Range
4*2.3m
Max Cutting Thickness
700mm
Table Dimensions
4*1.8m
Max Loading Weight
50t
Spindle Motor
15kw(Rough Milling Head)11kw(Finish Milling Head)
Spindle Speed
2000rpm
Cutting Diameter
80mm(Rough Milling Head)250mm(Finish Milling Head)
Feeding Speed
6m/Min(X)6m/Min(Y)5m/Min(Z)
Machine Weight
32t
Trademark
GooDa
Transport Package
Steel Box
Specification
Customized products
Origin
China
HS Code
8459611000
Model NO.
3020
Automatic Grade
Automatic
Precision
High Precision
Certification
GS, CE, RoHS, ISO 9001, Ks (South Korea)
Condition
New
After-Sales Service
Excellent After-Sales Service
Warranty
One Year
Cutting Range
4*2.3m
Max Cutting Thickness
700mm
Table Dimensions
4*1.8m
Max Loading Weight
50t
Spindle Motor
15kw(Rough Milling Head)11kw(Finish Milling Head)
Spindle Speed
2000rpm
Cutting Diameter
80mm(Rough Milling Head)250mm(Finish Milling Head)
Feeding Speed
6m/Min(X)6m/Min(Y)5m/Min(Z)
Machine Weight
32t
Trademark
GooDa
Transport Package
Steel Box
Specification
Customized products
Origin
China
HS Code
8459611000
Product Desciption
- (Main specifications and technical parameters)
| ITEM | UNIT | THP-3020 |
| Table | ||
| Table area | MM | 3680×2000 |
| TT-slot size | MM | 22×8×500/slot size 18 mm pitch 250 mm |
| TT-slot accuracy | H7 | |
Workbench maximum cutting weight | T/M² | 8 |
| Travel (:0,0) (Note: This stroke is the stroke when the five-axis head is at 0 position. If it is not at 0 position, the stroke interference zone protection is required.) | ||
| XX-axis travel | MM | 3000 |
| YY-axis travel | MM | 2000 |
| ZZ-axis travel | MM | 800/1000 |
| Two column spacing | MM | 2650 |
Spindle tip to table distance | MM | 80~880();350~1150() 80 ~ 880 (vertical spindle); 350 ~ 1150 (horizontal spindle) |
Table to beam height | MM | 1500 |
| Linear Guide | ||
| Line rails | MM | X:45,Y:55,Z:45 |
| Number of rail sliders | X:8,Y:4,Z:8 | |
| Number of line tracks | X:4Y:2Z:4 X: 4 heavy-load roller rails Y: 2 heavy-load roller rails Z: 4 heavy-load roller rails | |
| SPINDLE | ||
| Spindle taper | HSK-A63 | |
| Spindle speed | R.P.M | 24000 |
| Spindle power | KW | 34 |
Spindle rated output torque | N•M | 67 |
| C Spindle C | ||
| Rated torque | N•M | 1250 |
| Speed | R.P.M | 30 |
| Holding torque | N•M | 4000 |
| Range of rotation | ±270° | |
| Encoder | ||
| positioning accuracy | MM | 8″(VDI 3441) |
| Repeatability | MM | 6″(VDI 3441) |
| A Spindle A | ||
| Rated torque | N•M | 707 |
| Speed | R.P.M | 30 |
| Holding torque | N•M | 2000 |
| Range of rotation | ±110° | |
| Encoder | Absolute type | |
| positioning accuracy | MM | 8″(VDI 3441) |
| Repeatability | MM | 6″(VDI 3441) |
| Ballscrew | ||
| / Ball screw diameter/pitch | MM | X:Φ63/16,Y:Φ50/16,Z:Φ50/10 |
| FEED | ||
| Cutting speed | MM/min | 1~20000/30000 |
| Fast moving speed | MM/min | X:24000 Y:24000 Z:24000 |
| ACCURACY | ||
| positioning accuracy | MM | VDI: 0.02/ISO 230-2 0.008 |
Repeated positioning accuracy | MM | VDI: 0.01/0.006 |
| MOTOR | ||
| Three-axis servomotor | X:1FK7103,Y:1FK7103,Z:1FK7105 | |
| Rated Power | KW | X:5.23,Y:5.23,Z:7.8 |
| Rated Torque | N•M | X:36,Y:36,Z:48 |
| Three axis ratio | ||
| XX-axis direct | 1:1 | |
| YY-axis direct | 1:1 | |
| ZZ-axis direct | 1:1 | |
| OTHER | ||
| Power requirements | Three-phase communication 380V,50HZ,120KVA | |
| Pressure requirements | KG/CM2 | 6.5 |
| Machine weight | KG | ≈30000 |
| (××) Machine size (length × width × height) | MM | 5900×5100×4400 |
,-Major spare parts brands and suppliers:
| No | Item Name | Brands | Note |
| 1 | (Mihana resin sand casting) | China | |
| 2 | () CNC system (including servo motor) | SIEMENS 840D | Germany |
| 3 | Ball screw bearing | NSK | Japan |
| 4 | Ball screw | Hiwin | Taiwan |
| 5 | Roller track | Hiwin | Taiwan |
| 6 | Grating ruler | Fagor | Spain |
| 7 | Five-axis head and electric spindle | HSD | Italy |
| 8 | Water cooler | Link wild | Taiwan |
| 9 | Automatic lubrication system | BIJUR DELIMON | Sino-foreign joint venture |
| 10 | Cutting fluid cooling motor | Walrus | Taiwan |
| 11 | China | ||
| 12 | No fuse switch | Schneider Electric | Taiwan |
| 13 | Air pressure solenoid valve | Airtac | Taiwan |
| 14 | Relay | Schneider Electric | Taiwan |
| 15 | Transformer | Huangshi | Taiwan |
| 16 | Panel touch switch | Bingjie | China |
| 17 | Couplings | KTR/SIT | / Germany/Italy |
| 18 | Balance system | Li tian | Sino-foreign joint venture |
| 19 | Five-axis hydraulic station | Have | Germany |
| 20 | Air conditioning | Link wild | Taiwan |
,Standard configuration:
| No | Item Name |
| 1 | Spindle blowing system |
| 2 | Spindle cooling system |
| 3 | Cutting fluid system |
| 4 | Centralized centralized automatic lubrication system |
| 5 | Electric control box temperature regulator |
| 6 | Work light warning |
| 7 | RS232 RS232 transmission interface |
| 8 | CF/ USB CF card program storage / USB interface |
| 9 | Pulse handwheel |
| 10 | DNC DNC online processing |
| 11 | Turbocharger gas-to-oil hydraulic tool |
| 12 | Manual interpolation |
| 13 | AICC |
| 14 | (LED) Work Lights (LED lights) |
| 15 | Screw extruder on both sides |
| 16 | Chain chip conveyor |
| 17 | Chip car |
| 18 | Coolant tank |
| 19 | Cantilever operation box |
| 20 | Half-shell sheet metal |
| 21 | Air Gun |
| 22 | Split type electric control cabinet |
| 23 | Transformer24V |
| 24 | Adjustment Tool and Toolbox |
- () Special accessories (optional check):
| BT50-32T Horizontal magazine BT50-32T | SIEMENS 840D CNC system SIEMENS 840D | ||
| 90 Manually 90 degrees | 1 X Y Z Increase the servo motor by 1 level X Y Z | ||
| 90 Manual extension head right 90 degrees | BT-50 BT-50 oil knife handle | ||
| ( : ) Fourth axis (specification: ) | Grating ruler |
,Random delivery list
| No | Item Name | Quantity |
| 1 | Operation and maintenance manual | One |
| 2 | Foot horn | One |
| 3 | Anchor bolt | One |
| 4 | () Toolbox (including commonly used tools on the machine) | One |
- Required items when the machine is delivered for use
a.:3220V±10%.
AC voltage: 3-phase AC 220V ±10%
b.:60 HZ±1%.
Frequency: 60 HZ±1%.
c.:45KW.
Power capacity: 45KW
d.(,,,.,CE).
Three-phase automatic voltage regulator (regulator must be installed to ensure the stability of the machine, avoid voltage instability leading to the machine can not be used normally, and a machine is best to use a regulator. To ensure the stability The quality of the pressure regulator requires CE certification)
e.16mm².
The power three-phase input wire diameter requirement is not less than 16mm2.
2,Air source requirements
a. ,(,7kgf/cm2,10ºC).
Compressed air must be filtered for cleaning and drying (7kgf/cm2, 10°C)
b. (1hp90NL/min).
The supply of compressed air must meet the requirements of the machine (1hp compressor provides 90NL/min air flow)
3,Ground requirements
a,,1.5,.
The machine tool is suitable for installation on the concrete cement foundation. The thickness of the foundation is 1.5 meters, avoiding the change of the precision of the machine tool due to the subsidence of the foundation.
b,,10mm.
The required level of the surface of the foundation is within 10mm of the height within the range.
4,Lubrication requirements
68#,4L.,,,.
68 # guide rail lubricant, automatic lubrication pump capacity is 4L. To ensure the safety of oil, improve machine performance.
5,Grounding requirements
,.Φ20mm,1.5m,,Φ5-6mm.
The ground wire of the machine tool must be grounded separately. It is forbidden to connect multiple machine tools to one ground pile or to other equipment grounding or to outdoor water pipes. It is required to use a grounded copper rod purlin with a diameter of Φ20mm and a length of 1.5m to enter the ground, and three Φ5-6mm screw holes are made in the copper rod head for wiring.
6,Cutting fluid requirements
400L(,,).
Ensure at least 400L of cutting fluid for machining (emulsion mix according to requirements, otherwise it will rust the machine and damage the accuracy of the machine).
7,Testing requirements
,,.
The customer prepares the workpieces and tools for trial machining according to their own processing conditions. The delivery personnel can do the fine tuning of the parameters according to the customer's requirements to achieve a satisfactory processing result.
- (Main specifications and technical parameters)
| ITEM | UNIT | THP-3020 |
| Table | ||
| Table area | MM | 3680×2000 |
| TT-slot size | MM | 22×8×500/slot size 18 mm pitch 250 mm |
| TT-slot accuracy | H7 | |
Workbench maximum cutting weight | T/M² | 8 |
| Travel (:0,0) (Note: This stroke is the stroke when the five-axis head is at 0 position. If it is not at 0 position, the stroke interference zone protection is required.) | ||
| XX-axis travel | MM | 3000 |
| YY-axis travel | MM | 2000 |
| ZZ-axis travel | MM | 800/1000 |
| Two column spacing | MM | 2650 |
Spindle tip to table distance | MM | 80~880();350~1150() 80 ~ 880 (vertical spindle); 350 ~ 1150 (horizontal spindle) |
Table to beam height | MM | 1500 |
| Linear Guide | ||
| Line rails | MM | X:45,Y:55,Z:45 |
| Number of rail sliders | X:8,Y:4,Z:8 | |
| Number of line tracks | X:4Y:2Z:4 X: 4 heavy-load roller rails Y: 2 heavy-load roller rails Z: 4 heavy-load roller rails | |
| SPINDLE | ||
| Spindle taper | HSK-A63 | |
| Spindle speed | R.P.M | 24000 |
| Spindle power | KW | 34 |
Spindle rated output torque | N•M | 67 |
| C Spindle C | ||
| Rated torque | N•M | 1250 |
| Speed | R.P.M | 30 |
| Holding torque | N•M | 4000 |
| Range of rotation | ±270° | |
| Encoder | ||
| positioning accuracy | MM | 8″(VDI 3441) |
| Repeatability | MM | 6″(VDI 3441) |
| A Spindle A | ||
| Rated torque | N•M | 707 |
| Speed | R.P.M | 30 |
| Holding torque | N•M | 2000 |
| Range of rotation | ±110° | |
| Encoder | Absolute type | |
| positioning accuracy | MM | 8″(VDI 3441) |
| Repeatability | MM | 6″(VDI 3441) |
| Ballscrew | ||
| / Ball screw diameter/pitch | MM | X:Φ63/16,Y:Φ50/16,Z:Φ50/10 |
| FEED | ||
| Cutting speed | MM/min | 1~20000/30000 |
| Fast moving speed | MM/min | X:24000 Y:24000 Z:24000 |
| ACCURACY | ||
| positioning accuracy | MM | VDI: 0.02/ISO 230-2 0.008 |
Repeated positioning accuracy | MM | VDI: 0.01/0.006 |
| MOTOR | ||
| Three-axis servomotor | X:1FK7103,Y:1FK7103,Z:1FK7105 | |
| Rated Power | KW | X:5.23,Y:5.23,Z:7.8 |
| Rated Torque | N•M | X:36,Y:36,Z:48 |
| Three axis ratio | ||
| XX-axis direct | 1:1 | |
| YY-axis direct | 1:1 | |
| ZZ-axis direct | 1:1 | |
| OTHER | ||
| Power requirements | Three-phase communication 380V,50HZ,120KVA | |
| Pressure requirements | KG/CM2 | 6.5 |
| Machine weight | KG | ≈30000 |
| (××) Machine size (length × width × height) | MM | 5900×5100×4400 |
,-Major spare parts brands and suppliers:
| No | Item Name | Brands | Note |
| 1 | (Mihana resin sand casting) | China | |
| 2 | () CNC system (including servo motor) | SIEMENS 840D | Germany |
| 3 | Ball screw bearing | NSK | Japan |
| 4 | Ball screw | Hiwin | Taiwan |
| 5 | Roller track | Hiwin | Taiwan |
| 6 | Grating ruler | Fagor | Spain |
| 7 | Five-axis head and electric spindle | HSD | Italy |
| 8 | Water cooler | Link wild | Taiwan |
| 9 | Automatic lubrication system | BIJUR DELIMON | Sino-foreign joint venture |
| 10 | Cutting fluid cooling motor | Walrus | Taiwan |
| 11 | China | ||
| 12 | No fuse switch | Schneider Electric | Taiwan |
| 13 | Air pressure solenoid valve | Airtac | Taiwan |
| 14 | Relay | Schneider Electric | Taiwan |
| 15 | Transformer | Huangshi | Taiwan |
| 16 | Panel touch switch | Bingjie | China |
| 17 | Couplings | KTR/SIT | / Germany/Italy |
| 18 | Balance system | Li tian | Sino-foreign joint venture |
| 19 | Five-axis hydraulic station | Have | Germany |
| 20 | Air conditioning | Link wild | Taiwan |
,Standard configuration:
| No | Item Name |
| 1 | Spindle blowing system |
| 2 | Spindle cooling system |
| 3 | Cutting fluid system |
| 4 | Centralized centralized automatic lubrication system |
| 5 | Electric control box temperature regulator |
| 6 | Work light warning |
| 7 | RS232 RS232 transmission interface |
| 8 | CF/ USB CF card program storage / USB interface |
| 9 | Pulse handwheel |
| 10 | DNC DNC online processing |
| 11 | Turbocharger gas-to-oil hydraulic tool |
| 12 | Manual interpolation |
| 13 | AICC |
| 14 | (LED) Work Lights (LED lights) |
| 15 | Screw extruder on both sides |
| 16 | Chain chip conveyor |
| 17 | Chip car |
| 18 | Coolant tank |
| 19 | Cantilever operation box |
| 20 | Half-shell sheet metal |
| 21 | Air Gun |
| 22 | Split type electric control cabinet |
| 23 | Transformer24V |
| 24 | Adjustment Tool and Toolbox |
- () Special accessories (optional check):
| BT50-32T Horizontal magazine BT50-32T | SIEMENS 840D CNC system SIEMENS 840D | ||
| 90 Manually 90 degrees | 1 X Y Z Increase the servo motor by 1 level X Y Z | ||
| 90 Manual extension head right 90 degrees | BT-50 BT-50 oil knife handle | ||
| ( : ) Fourth axis (specification: ) | Grating ruler |
,Random delivery list
| No | Item Name | Quantity |
| 1 | Operation and maintenance manual | One |
| 2 | Foot horn | One |
| 3 | Anchor bolt | One |
| 4 | () Toolbox (including commonly used tools on the machine) | One |
- Required items when the machine is delivered for use
a.:3220V±10%.
AC voltage: 3-phase AC 220V ±10%
b.:60 HZ±1%.
Frequency: 60 HZ±1%.
c.:45KW.
Power capacity: 45KW
d.(,,,.,CE).
Three-phase automatic voltage regulator (regulator must be installed to ensure the stability of the machine, avoid voltage instability leading to the machine can not be used normally, and a machine is best to use a regulator. To ensure the stability The quality of the pressure regulator requires CE certification)
e.16mm².
The power three-phase input wire diameter requirement is not less than 16mm2.
2,Air source requirements
a. ,(,7kgf/cm2,10ºC).
Compressed air must be filtered for cleaning and drying (7kgf/cm2, 10°C)
b. (1hp90NL/min).
The supply of compressed air must meet the requirements of the machine (1hp compressor provides 90NL/min air flow)
3,Ground requirements
a,,1.5,.
The machine tool is suitable for installation on the concrete cement foundation. The thickness of the foundation is 1.5 meters, avoiding the change of the precision of the machine tool due to the subsidence of the foundation.
b,,10mm.
The required level of the surface of the foundation is within 10mm of the height within the range.
4,Lubrication requirements
68#,4L.,,,.
68 # guide rail lubricant, automatic lubrication pump capacity is 4L. To ensure the safety of oil, improve machine performance.
5,Grounding requirements
,.Φ20mm,1.5m,,Φ5-6mm.
The ground wire of the machine tool must be grounded separately. It is forbidden to connect multiple machine tools to one ground pile or to other equipment grounding or to outdoor water pipes. It is required to use a grounded copper rod purlin with a diameter of Φ20mm and a length of 1.5m to enter the ground, and three Φ5-6mm screw holes are made in the copper rod head for wiring.
6,Cutting fluid requirements
400L(,,).
Ensure at least 400L of cutting fluid for machining (emulsion mix according to requirements, otherwise it will rust the machine and damage the accuracy of the machine).
7,Testing requirements
,,.
The customer prepares the workpieces and tools for trial machining according to their own processing conditions. The delivery personnel can do the fine tuning of the parameters according to the customer's requirements to achieve a satisfactory processing result.
- (Main specifications and technical parameters)
| ITEM | UNIT | THP-3020 |
| Table | ||
| Table area | MM | 3680×2000 |
| TT-slot size | MM | 22×8×500/slot size 18 mm pitch 250 mm |
| TT-slot accuracy | H7 | |
Workbench maximum cutting weight | T/M² | 8 |
| Travel (:0,0) (Note: This stroke is the stroke when the five-axis head is at 0 position. If it is not at 0 position, the stroke interference zone protection is required.) | ||
| XX-axis travel | MM | 3000 |
| YY-axis travel | MM | 2000 |
| ZZ-axis travel | MM | 800/1000 |
| Two column spacing | MM | 2650 |
Spindle tip to table distance | MM | 80~880();350~1150() 80 ~ 880 (vertical spindle); 350 ~ 1150 (horizontal spindle) |
Table to beam height | MM | 1500 |
| Linear Guide | ||
| Line rails | MM | X:45,Y:55,Z:45 |
| Number of rail sliders | X:8,Y:4,Z:8 | |
| Number of line tracks | X:4Y:2Z:4 X: 4 heavy-load roller rails Y: 2 heavy-load roller rails Z: 4 heavy-load roller rails | |
| SPINDLE | ||
| Spindle taper | HSK-A63 | |
| Spindle speed | R.P.M | 24000 |
| Spindle power | KW | 34 |
Spindle rated output torque | N•M | 67 |
| C Spindle C | ||
| Rated torque | N•M | 1250 |
| Speed | R.P.M | 30 |
| Holding torque | N•M | 4000 |
| Range of rotation | ±270° | |
| Encoder | ||
| positioning accuracy | MM | 8″(VDI 3441) |
| Repeatability | MM | 6″(VDI 3441) |
| A Spindle A | ||
| Rated torque | N•M | 707 |
| Speed | R.P.M | 30 |
| Holding torque | N•M | 2000 |
| Range of rotation | ±110° | |
| Encoder | Absolute type | |
| positioning accuracy | MM | 8″(VDI 3441) |
| Repeatability | MM | 6″(VDI 3441) |
| Ballscrew | ||
| / Ball screw diameter/pitch | MM | X:Φ63/16,Y:Φ50/16,Z:Φ50/10 |
| FEED | ||
| Cutting speed | MM/min | 1~20000/30000 |
| Fast moving speed | MM/min | X:24000 Y:24000 Z:24000 |
| ACCURACY | ||
| positioning accuracy | MM | VDI: 0.02/ISO 230-2 0.008 |
Repeated positioning accuracy | MM | VDI: 0.01/0.006 |
| MOTOR | ||
| Three-axis servomotor | X:1FK7103,Y:1FK7103,Z:1FK7105 | |
| Rated Power | KW | X:5.23,Y:5.23,Z:7.8 |
| Rated Torque | N•M | X:36,Y:36,Z:48 |
| Three axis ratio | ||
| XX-axis direct | 1:1 | |
| YY-axis direct | 1:1 | |
| ZZ-axis direct | 1:1 | |
| OTHER | ||
| Power requirements | Three-phase communication 380V,50HZ,120KVA | |
| Pressure requirements | KG/CM2 | 6.5 |
| Machine weight | KG | ≈30000 |
| (××) Machine size (length × width × height) | MM | 5900×5100×4400 |
,-Major spare parts brands and suppliers:
| No | Item Name | Brands | Note |
| 1 | (Mihana resin sand casting) | China | |
| 2 | () CNC system (including servo motor) | SIEMENS 840D | Germany |
| 3 | Ball screw bearing | NSK | Japan |
| 4 | Ball screw | Hiwin | Taiwan |
| 5 | Roller track | Hiwin | Taiwan |
| 6 | Grating ruler | Fagor | Spain |
| 7 | Five-axis head and electric spindle | HSD | Italy |
| 8 | Water cooler | Link wild | Taiwan |
| 9 | Automatic lubrication system | BIJUR DELIMON | Sino-foreign joint venture |
| 10 | Cutting fluid cooling motor | Walrus | Taiwan |
| 11 | China | ||
| 12 | No fuse switch | Schneider Electric | Taiwan |
| 13 | Air pressure solenoid valve | Airtac | Taiwan |
| 14 | Relay | Schneider Electric | Taiwan |
| 15 | Transformer | Huangshi | Taiwan |
| 16 | Panel touch switch | Bingjie | China |
| 17 | Couplings | KTR/SIT | / Germany/Italy |
| 18 | Balance system | Li tian | Sino-foreign joint venture |
| 19 | Five-axis hydraulic station | Have | Germany |
| 20 | Air conditioning | Link wild | Taiwan |
,Standard configuration:
| No | Item Name |
| 1 | Spindle blowing system |
| 2 | Spindle cooling system |
| 3 | Cutting fluid system |
| 4 | Centralized centralized automatic lubrication system |
| 5 | Electric control box temperature regulator |
| 6 | Work light warning |
| 7 | RS232 RS232 transmission interface |
| 8 | CF/ USB CF card program storage / USB interface |
| 9 | Pulse handwheel |
| 10 | DNC DNC online processing |
| 11 | Turbocharger gas-to-oil hydraulic tool |
| 12 | Manual interpolation |
| 13 | AICC |
| 14 | (LED) Work Lights (LED lights) |
| 15 | Screw extruder on both sides |
| 16 | Chain chip conveyor |
| 17 | Chip car |
| 18 | Coolant tank |
| 19 | Cantilever operation box |
| 20 | Half-shell sheet metal |
| 21 | Air Gun |
| 22 | Split type electric control cabinet |
| 23 | Transformer24V |
| 24 | Adjustment Tool and Toolbox |
- () Special accessories (optional check):
| BT50-32T Horizontal magazine BT50-32T | SIEMENS 840D CNC system SIEMENS 840D | ||
| 90 Manually 90 degrees | 1 X Y Z Increase the servo motor by 1 level X Y Z | ||
| 90 Manual extension head right 90 degrees | BT-50 BT-50 oil knife handle | ||
| ( : ) Fourth axis (specification: ) | Grating ruler |
,Random delivery list
| No | Item Name | Quantity |
| 1 | Operation and maintenance manual | One |
| 2 | Foot horn | One |
| 3 | Anchor bolt | One |
| 4 | () Toolbox (including commonly used tools on the machine) | One |
- Required items when the machine is delivered for use
a.:3220V±10%.
AC voltage: 3-phase AC 220V ±10%
b.:60 HZ±1%.
Frequency: 60 HZ±1%.
c.:45KW.
Power capacity: 45KW
d.(,,,.,CE).
Three-phase automatic voltage regulator (regulator must be installed to ensure the stability of the machine, avoid voltage instability leading to the machine can not be used normally, and a machine is best to use a regulator. To ensure the stability The quality of the pressure regulator requires CE certification)
e.16mm².
The power three-phase input wire diameter requirement is not less than 16mm2.
2,Air source requirements
a. ,(,7kgf/cm2,10ºC).
Compressed air must be filtered for cleaning and drying (7kgf/cm2, 10°C)
b. (1hp90NL/min).
The supply of compressed air must meet the requirements of the machine (1hp compressor provides 90NL/min air flow)
3,Ground requirements
a,,1.5,.
The machine tool is suitable for installation on the concrete cement foundation. The thickness of the foundation is 1.5 meters, avoiding the change of the precision of the machine tool due to the subsidence of the foundation.
b,,10mm.
The required level of the surface of the foundation is within 10mm of the height within the range.
4,Lubrication requirements
68#,4L.,,,.
68 # guide rail lubricant, automatic lubrication pump capacity is 4L. To ensure the safety of oil, improve machine performance.
5,Grounding requirements
,.Φ20mm,1.5m,,Φ5-6mm.
The ground wire of the machine tool must be grounded separately. It is forbidden to connect multiple machine tools to one ground pile or to other equipment grounding or to outdoor water pipes. It is required to use a grounded copper rod purlin with a diameter of Φ20mm and a length of 1.5m to enter the ground, and three Φ5-6mm screw holes are made in the copper rod head for wiring.
6,Cutting fluid requirements
400L(,,).
Ensure at least 400L of cutting fluid for machining (emulsion mix according to requirements, otherwise it will rust the machine and damage the accuracy of the machine).
7,Testing requirements
,,.
The customer prepares the workpieces and tools for trial machining according to their own processing conditions. The delivery personnel can do the fine tuning of the parameters according to the customer's requirements to achieve a satisfactory processing result.
- (Main specifications and technical parameters)
| ITEM | UNIT | THP-3020 |
| Table | ||
| Table area | MM | 3680×2000 |
| TT-slot size | MM | 22×8×500/slot size 18 mm pitch 250 mm |
| TT-slot accuracy | H7 | |
Workbench maximum cutting weight | T/M² | 8 |
| Travel (:0,0) (Note: This stroke is the stroke when the five-axis head is at 0 position. If it is not at 0 position, the stroke interference zone protection is required.) | ||
| XX-axis travel | MM | 3000 |
| YY-axis travel | MM | 2000 |
| ZZ-axis travel | MM | 800/1000 |
| Two column spacing | MM | 2650 |
Spindle tip to table distance | MM | 80~880();350~1150() 80 ~ 880 (vertical spindle); 350 ~ 1150 (horizontal spindle) |
Table to beam height | MM | 1500 |
| Linear Guide | ||
| Line rails | MM | X:45,Y:55,Z:45 |
| Number of rail sliders | X:8,Y:4,Z:8 | |
| Number of line tracks | X:4Y:2Z:4 X: 4 heavy-load roller rails Y: 2 heavy-load roller rails Z: 4 heavy-load roller rails | |
| SPINDLE | ||
| Spindle taper | HSK-A63 | |
| Spindle speed | R.P.M | 24000 |
| Spindle power | KW | 34 |
Spindle rated output torque | N•M | 67 |
| C Spindle C | ||
| Rated torque | N•M | 1250 |
| Speed | R.P.M | 30 |
| Holding torque | N•M | 4000 |
| Range of rotation | ±270° | |
| Encoder | ||
| positioning accuracy | MM | 8″(VDI 3441) |
| Repeatability | MM | 6″(VDI 3441) |
| A Spindle A | ||
| Rated torque | N•M | 707 |
| Speed | R.P.M | 30 |
| Holding torque | N•M | 2000 |
| Range of rotation | ±110° | |
| Encoder | Absolute type | |
| positioning accuracy | MM | 8″(VDI 3441) |
| Repeatability | MM | 6″(VDI 3441) |
| Ballscrew | ||
| / Ball screw diameter/pitch | MM | X:Φ63/16,Y:Φ50/16,Z:Φ50/10 |
| FEED | ||
| Cutting speed | MM/min | 1~20000/30000 |
| Fast moving speed | MM/min | X:24000 Y:24000 Z:24000 |
| ACCURACY | ||
| positioning accuracy | MM | VDI: 0.02/ISO 230-2 0.008 |
Repeated positioning accuracy | MM | VDI: 0.01/0.006 |
| MOTOR | ||
| Three-axis servomotor | X:1FK7103,Y:1FK7103,Z:1FK7105 | |
| Rated Power | KW | X:5.23,Y:5.23,Z:7.8 |
| Rated Torque | N•M | X:36,Y:36,Z:48 |
| Three axis ratio | ||
| XX-axis direct | 1:1 | |
| YY-axis direct | 1:1 | |
| ZZ-axis direct | 1:1 | |
| OTHER | ||
| Power requirements | Three-phase communication 380V,50HZ,120KVA | |
| Pressure requirements | KG/CM2 | 6.5 |
| Machine weight | KG | ≈30000 |
| (××) Machine size (length × width × height) | MM | 5900×5100×4400 |
,-Major spare parts brands and suppliers:
| No | Item Name | Brands | Note |
| 1 | (Mihana resin sand casting) | China | |
| 2 | () CNC system (including servo motor) | SIEMENS 840D | Germany |
| 3 | Ball screw bearing | NSK | Japan |
| 4 | Ball screw | Hiwin | Taiwan |
| 5 | Roller track | Hiwin | Taiwan |
| 6 | Grating ruler | Fagor | Spain |
| 7 | Five-axis head and electric spindle | HSD | Italy |
| 8 | Water cooler | Link wild | Taiwan |
| 9 | Automatic lubrication system | BIJUR DELIMON | Sino-foreign joint venture |
| 10 | Cutting fluid cooling motor | Walrus | Taiwan |
| 11 | China | ||
| 12 | No fuse switch | Schneider Electric | Taiwan |
| 13 | Air pressure solenoid valve | Airtac | Taiwan |
| 14 | Relay | Schneider Electric | Taiwan |
| 15 | Transformer | Huangshi | Taiwan |
| 16 | Panel touch switch | Bingjie | China |
| 17 | Couplings | KTR/SIT | / Germany/Italy |
| 18 | Balance system | Li tian | Sino-foreign joint venture |
| 19 | Five-axis hydraulic station | Have | Germany |
| 20 | Air conditioning | Link wild | Taiwan |
,Standard configuration:
| No | Item Name |
| 1 | Spindle blowing system |
| 2 | Spindle cooling system |
| 3 | Cutting fluid system |
| 4 | Centralized centralized automatic lubrication system |
| 5 | Electric control box temperature regulator |
| 6 | Work light warning |
| 7 | RS232 RS232 transmission interface |
| 8 | CF/ USB CF card program storage / USB interface |
| 9 | Pulse handwheel |
| 10 | DNC DNC online processing |
| 11 | Turbocharger gas-to-oil hydraulic tool |
| 12 | Manual interpolation |
| 13 | AICC |
| 14 | (LED) Work Lights (LED lights) |
| 15 | Screw extruder on both sides |
| 16 | Chain chip conveyor |
| 17 | Chip car |
| 18 | Coolant tank |
| 19 | Cantilever operation box |
| 20 | Half-shell sheet metal |
| 21 | Air Gun |
| 22 | Split type electric control cabinet |
| 23 | Transformer24V |
| 24 | Adjustment Tool and Toolbox |
- () Special accessories (optional check):
| BT50-32T Horizontal magazine BT50-32T | SIEMENS 840D CNC system SIEMENS 840D | ||
| 90 Manually 90 degrees | 1 X Y Z Increase the servo motor by 1 level X Y Z | ||
| 90 Manual extension head right 90 degrees | BT-50 BT-50 oil knife handle | ||
| ( : ) Fourth axis (specification: ) | Grating ruler |
,Random delivery list
| No | Item Name | Quantity |
| 1 | Operation and maintenance manual | One |
| 2 | Foot horn | One |
| 3 | Anchor bolt | One |
| 4 | () Toolbox (including commonly used tools on the machine) | One |
- Required items when the machine is delivered for use
a.:3220V±10%.
AC voltage: 3-phase AC 220V ±10%
b.:60 HZ±1%.
Frequency: 60 HZ±1%.
c.:45KW.
Power capacity: 45KW
d.(,,,.,CE).
Three-phase automatic voltage regulator (regulator must be installed to ensure the stability of the machine, avoid voltage instability leading to the machine can not be used normally, and a machine is best to use a regulator. To ensure the stability The quality of the pressure regulator requires CE certification)
e.16mm².
The power three-phase input wire diameter requirement is not less than 16mm2.
2,Air source requirements
a. ,(,7kgf/cm2,10ºC).
Compressed air must be filtered for cleaning and drying (7kgf/cm2, 10°C)
b. (1hp90NL/min).
The supply of compressed air must meet the requirements of the machine (1hp compressor provides 90NL/min air flow)
3,Ground requirements
a,,1.5,.
The machine tool is suitable for installation on the concrete cement foundation. The thickness of the foundation is 1.5 meters, avoiding the change of the precision of the machine tool due to the subsidence of the foundation.
b,,10mm.
The required level of the surface of the foundation is within 10mm of the height within the range.
4,Lubrication requirements
68#,4L.,,,.
68 # guide rail lubricant, automatic lubrication pump capacity is 4L. To ensure the safety of oil, improve machine performance.
5,Grounding requirements
,.Φ20mm,1.5m,,Φ5-6mm.
The ground wire of the machine tool must be grounded separately. It is forbidden to connect multiple machine tools to one ground pile or to other equipment grounding or to outdoor water pipes. It is required to use a grounded copper rod purlin with a diameter of Φ20mm and a length of 1.5m to enter the ground, and three Φ5-6mm screw holes are made in the copper rod head for wiring.
6,Cutting fluid requirements
400L(,,).
Ensure at least 400L of cutting fluid for machining (emulsion mix according to requirements, otherwise it will rust the machine and damage the accuracy of the machine).
7,Testing requirements
,,.
The customer prepares the workpieces and tools for trial machining according to their own processing conditions. The delivery personnel can do the fine tuning of the parameters according to the customer's requirements to achieve a satisfactory processing result.
- (Main specifications and technical parameters)
| ITEM | UNIT | THP-3020 |
| Table | ||
| Table area | MM | 3680×2000 |
| TT-slot size | MM | 22×8×500/slot size 18 mm pitch 250 mm |
| TT-slot accuracy | H7 | |
Workbench maximum cutting weight | T/M² | 8 |
| Travel (:0,0) (Note: This stroke is the stroke when the five-axis head is at 0 position. If it is not at 0 position, the stroke interference zone protection is required.) | ||
| XX-axis travel | MM | 3000 |
| YY-axis travel | MM | 2000 |
| ZZ-axis travel | MM | 800/1000 |
| Two column spacing | MM | 2650 |
Spindle tip to table distance | MM | 80~880();350~1150() 80 ~ 880 (vertical spindle); 350 ~ 1150 (horizontal spindle) |
Table to beam height | MM | 1500 |
| Linear Guide | ||
| Line rails | MM | X:45,Y:55,Z:45 |
| Number of rail sliders | X:8,Y:4,Z:8 | |
| Number of line tracks | X:4Y:2Z:4 X: 4 heavy-load roller rails Y: 2 heavy-load roller rails Z: 4 heavy-load roller rails | |
| SPINDLE | ||
| Spindle taper | HSK-A63 | |
| Spindle speed | R.P.M | 24000 |
| Spindle power | KW | 34 |
Spindle rated output torque | N•M | 67 |
| C Spindle C | ||
| Rated torque | N•M | 1250 |
| Speed | R.P.M | 30 |
| Holding torque | N•M | 4000 |
| Range of rotation | ±270° | |
| Encoder | ||
| positioning accuracy | MM | 8″(VDI 3441) |
| Repeatability | MM | 6″(VDI 3441) |
| A Spindle A | ||
| Rated torque | N•M | 707 |
| Speed | R.P.M | 30 |
| Holding torque | N•M | 2000 |
| Range of rotation | ±110° | |
| Encoder | Absolute type | |
| positioning accuracy | MM | 8″(VDI 3441) |
| Repeatability | MM | 6″(VDI 3441) |
| Ballscrew | ||
| / Ball screw diameter/pitch | MM | X:Φ63/16,Y:Φ50/16,Z:Φ50/10 |
| FEED | ||
| Cutting speed | MM/min | 1~20000/30000 |
| Fast moving speed | MM/min | X:24000 Y:24000 Z:24000 |
| ACCURACY | ||
| positioning accuracy | MM | VDI: 0.02/ISO 230-2 0.008 |
Repeated positioning accuracy | MM | VDI: 0.01/0.006 |
| MOTOR | ||
| Three-axis servomotor | X:1FK7103,Y:1FK7103,Z:1FK7105 | |
| Rated Power | KW | X:5.23,Y:5.23,Z:7.8 |
| Rated Torque | N•M | X:36,Y:36,Z:48 |
| Three axis ratio | ||
| XX-axis direct | 1:1 | |
| YY-axis direct | 1:1 | |
| ZZ-axis direct | 1:1 | |
| OTHER | ||
| Power requirements | Three-phase communication 380V,50HZ,120KVA | |
| Pressure requirements | KG/CM2 | 6.5 |
| Machine weight | KG | ≈30000 |
| (××) Machine size (length × width × height) | MM | 5900×5100×4400 |
,-Major spare parts brands and suppliers:
| No | Item Name | Brands | Note |
| 1 | (Mihana resin sand casting) | China | |
| 2 | () CNC system (including servo motor) | SIEMENS 840D | Germany |
| 3 | Ball screw bearing | NSK | Japan |
| 4 | Ball screw | Hiwin | Taiwan |
| 5 | Roller track | Hiwin | Taiwan |
| 6 | Grating ruler | Fagor | Spain |
| 7 | Five-axis head and electric spindle | HSD | Italy |
| 8 | Water cooler | Link wild | Taiwan |
| 9 | Automatic lubrication system | BIJUR DELIMON | Sino-foreign joint venture |
| 10 | Cutting fluid cooling motor | Walrus | Taiwan |
| 11 | China | ||
| 12 | No fuse switch | Schneider Electric | Taiwan |
| 13 | Air pressure solenoid valve | Airtac | Taiwan |
| 14 | Relay | Schneider Electric | Taiwan |
| 15 | Transformer | Huangshi | Taiwan |
| 16 | Panel touch switch | Bingjie | China |
| 17 | Couplings | KTR/SIT | / Germany/Italy |
| 18 | Balance system | Li tian | Sino-foreign joint venture |
| 19 | Five-axis hydraulic station | Have | Germany |
| 20 | Air conditioning | Link wild | Taiwan |
,Standard configuration:
| No | Item Name |
| 1 | Spindle blowing system |
| 2 | Spindle cooling system |
| 3 | Cutting fluid system |
| 4 | Centralized centralized automatic lubrication system |
| 5 | Electric control box temperature regulator |
| 6 | Work light warning |
| 7 | RS232 RS232 transmission interface |
| 8 | CF/ USB CF card program storage / USB interface |
| 9 | Pulse handwheel |
| 10 | DNC DNC online processing |
| 11 | Turbocharger gas-to-oil hydraulic tool |
| 12 | Manual interpolation |
| 13 | AICC |
| 14 | (LED) Work Lights (LED lights) |
| 15 | Screw extruder on both sides |
| 16 | Chain chip conveyor |
| 17 | Chip car |
| 18 | Coolant tank |
| 19 | Cantilever operation box |
| 20 | Half-shell sheet metal |
| 21 | Air Gun |
| 22 | Split type electric control cabinet |
| 23 | Transformer24V |
| 24 | Adjustment Tool and Toolbox |
- () Special accessories (optional check):
| BT50-32T Horizontal magazine BT50-32T | SIEMENS 840D CNC system SIEMENS 840D | ||
| 90 Manually 90 degrees | 1 X Y Z Increase the servo motor by 1 level X Y Z | ||
| 90 Manual extension head right 90 degrees | BT-50 BT-50 oil knife handle | ||
| ( : ) Fourth axis (specification: ) | Grating ruler |
,Random delivery list
| No | Item Name | Quantity |
| 1 | Operation and maintenance manual | One |
| 2 | Foot horn | One |
| 3 | Anchor bolt | One |
| 4 | () Toolbox (including commonly used tools on the machine) | One |
- Required items when the machine is delivered for use
a.:3220V±10%.
AC voltage: 3-phase AC 220V ±10%
b.:60 HZ±1%.
Frequency: 60 HZ±1%.
c.:45KW.
Power capacity: 45KW
d.(,,,.,CE).
Three-phase automatic voltage regulator (regulator must be installed to ensure the stability of the machine, avoid voltage instability leading to the machine can not be used normally, and a machine is best to use a regulator. To ensure the stability The quality of the pressure regulator requires CE certification)
e.16mm².
The power three-phase input wire diameter requirement is not less than 16mm2.
2,Air source requirements
a. ,(,7kgf/cm2,10ºC).
Compressed air must be filtered for cleaning and drying (7kgf/cm2, 10°C)
b. (1hp90NL/min).
The supply of compressed air must meet the requirements of the machine (1hp compressor provides 90NL/min air flow)
3,Ground requirements
a,,1.5,.
The machine tool is suitable for installation on the concrete cement foundation. The thickness of the foundation is 1.5 meters, avoiding the change of the precision of the machine tool due to the subsidence of the foundation.
b,,10mm.
The required level of the surface of the foundation is within 10mm of the height within the range.
4,Lubrication requirements
68#,4L.,,,.
68 # guide rail lubricant, automatic lubrication pump capacity is 4L. To ensure the safety of oil, improve machine performance.
5,Grounding requirements
,.Φ20mm,1.5m,,Φ5-6mm.
The ground wire of the machine tool must be grounded separately. It is forbidden to connect multiple machine tools to one ground pile or to other equipment grounding or to outdoor water pipes. It is required to use a grounded copper rod purlin with a diameter of Φ20mm and a length of 1.5m to enter the ground, and three Φ5-6mm screw holes are made in the copper rod head for wiring.
6,Cutting fluid requirements
400L(,,).
Ensure at least 400L of cutting fluid for machining (emulsion mix according to requirements, otherwise it will rust the machine and damage the accuracy of the machine).
7,Testing requirements
,,.
The customer prepares the workpieces and tools for trial machining according to their own processing conditions. The delivery personnel can do the fine tuning of the parameters according to the customer's requirements to achieve a satisfactory processing result.
We are the first manufacturer to produce the high-end CNC machine in China, who focusing on developing and supplying the high efficiency, high accuracy, and high quality of CNC Duplex Milling Machine, Exchange-Pallet Vertical CNC Milling Machine,CNC Gantry Grinding Machine,5-Axis High Speed Gantry Machining Center , CNC High Speed Saw Machine and CNC Chamfering Machine.
Our aspiration is to be flexible in implementing customer requirements, guarantee the high reliability of the milling machine, ensure that spare parts are available at short notice and facilitate the prompt availability of service engineers.
The benefits of GOODA maintenance contract (After sales 3 years):
- Basic requirement in a certified QS system
- Guarantee for the accuracy of the measuring and test results
- Calibration, maintenance and, if necessary, repair with just one visit
- Fixed prices with a clear breakdown of costs
- Preventive maintenance helps you avoid expensive faults and ensures a high level of quality that lasts
The maintenance contract includes:
- Travelling time and expenses for our technician
- Maintenance and calibration work
- Small items required for carrying out the specified maintenance work
- Calibration with a corresponding maintenance and test report, allowing the results to be used to demonstrate compliance with national standards
1. What is your minimum order quantity and warranty?
MOQ is one set, and warranty is one year.
2.What CNC system do you use?
FANUC, SIEMENS, MISTSUBISHI etc. It depends on your choice.
3.When is the delivery time?
Conventional Machines,We will delivery then within 30-45 working days after received your
deposit,if some special machines will be some longer.we will give you the answer accordingly.
4. What is the package of the machines?
Packing: PE bag cover inside+ Plywood box + Steel beam frame.
5.How can I choose the most suitable machines ?
Please let us know your machining demand or machine size ,we can choose the best model
for you , or you can choose the exact model by yourself. You can also send us the products
drawing ,we will choose the most suitable machines for you .
6. What is your trade terms?
FOB, CFR,CIF or others terms are all acceptable.
7. What is your payment terms ?
Payment Terms : T/T 30% advance , 70% before shipment.
Cooperative Partner
Contact
Alicia
You Might Also Like
Children′ S Bicycles 3-Year-Old Baby Bicycles 2-4-6-Ye......
Removable Plate Heat Exchanger with SS304 316L Plates
Automatic Parking Barrier Parking Position Lock
5 Axis CNC Precision Machining Vane Whee
Elite 24V 200ah Li-ion Phosphate Battery Green Energy LiFePO......
6015 Sculpture Art Wood Carving, Panel Automatic Cutting Mac......
13ft Folding Huge Outdoor Trampoline GS Certification
Wholesale Factory Made High Quality Hospital Bed Mattress To......
Four Color Polyester Film Flexographic Printing Machine
Zoomlion Bull Dozer O Ring 1081001402 for Zoomlion Bulldozer......
Diamond Drill