Galin Metal / PTFE / Epoxy Powder Electrostatic Manual Powder Coating/Spray Machine (PHIRST) for High Quality Coating
China Galin Metal / PTFE / Epoxy Powder Electrostatic Manual Powder Coating/Spray Machine (PHIRST) for High Quality Coating, Find details about China Powder Coating Equipment, Spray Gun from Galin Metal / PTFE / Epoxy Powder Electrostatic Manual Powder Coating/Spray Machine (PHIRST) for High Quality Coating
Galin high quality manual powder coating machine PHIRST
This is a humanized machine
Choose special color formula to relieve eye fatigue
The gun handle adopts ergonomic hand grip design
All parameters are displayed in digital form, and every detail can be studied
The display is consistent with the actual high voltage, achieve what you see is what you get
[ CONTROL UNIT ]
· There are 23 kinds of programs, meet more spraying requirement
· Built in power board, voltage output is more durable and stable, and powder charging is more uniform
· Including the proportional valve with precise valve needle, stronger gas control ability and better atomization effect
· With parts box, convenient for user
[ POWDER COATING GUN ]
· The hand grip is designed with groove and angle fitting, which conforms to ergonomic design
· The gun shell is made of special formula and added PTFE material, which has excellent insulation and resistance characteristics, is not easy to crack, and has better service life and safety performance
· The isolation column capacitor and resin inside the cascade will give better play to the electrical performance
[ POWDER HOPPER & TROLLEY ]
· Powder hopper adopts 304 stainless steel detachable way, easy to clean, long service life
· The fluidizing plate is made of PTFE material with low friction coefficient and resistance to organic solvents
· The chassis of the trolley is added with powder hopper anti-skid design
· Use silent wheel and universal wheel, easy to move, no stuck
| ELECTRICAL DATA GALIN ELECTROSTATIC POWDER COATING MACHINE (PHIRST) | |
| Nominal input voltage | 110V 240VAC |
| Frequency | 50 - 60Hz |
| Connected load (without vibrator) | 140 VA |
| Nominal output voltage (to the gun) | eff.10 V |
| Nominal output current (to the gun) | max. 1.2 A |
| Connection and output for vibrator (on Aux output) | 110/230 VAC max. 100 W |
| Connection for rinsing function (valve) | 24 VDC max. 3 W |
| Temperature range | 0°C - +40°(+32°F - +104°F) |
| Max. surface temperature | 120 °C (+248 °F) |
| Approvals | II 3 D IP54 120 °C |
| PNEUMATICAL DATA GALIN ELECTROSTATIC POWDER COATING MACHINE (PHIRST) | |
| MAX.input pressure | 10bar / 145psi |
| MIN.input pressure | 6bar / 87psi |
| Max.water vapor content of the compressed air | 1.3g/Nm³ |
| Max.oil vapor content of the compressed air | 0.1mg/Nm³ |
| Max.compressed air consumption | 8Nm³/h |
| PROCESSIBLE POWDER GALIN ELECTROSTATIC POWDER COATING MACHINE (PHIRST) | |
| Epoxy Powder: | √ |
| Teflon Powder: | √ |
| Metal Powder: | √ |
| Enamel Powder: | × |
Galin Electrostatic powder coating machine can be used for Furnitur
Galin Electrostatic powder coating machine can be used for Metal Rail
Galin Electrostatic powder coating machine can be used for Metal products
Galin Electrostatic powder coating machine can be used for Glass products
Galin Electrostatic powder coating machine can be used for Metal or Glass Cup
Galin Electrostatic powder coating machine can be used for Any Metal or Glass you want
(PHIRST)
- Daily Maintenance
2. Clean the powder gun
3. Clean the powder hose and suction unit
- Weekly Maintenance
2. Check the control unit grounding connections to the coating booth bolts,
the suspension devices of the work pieces,or the conveyor.
TROUBLESHOOTING GUIDE OF POWDER COATING MACHINE(PHIRST)
If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
| Error/cause | Troubleshooting |
| Injector nozzle, non-return valve unit, powder hose or powder gun are clogged | Clean the corresponding parts and if necessary,replace them |
| Conveying vacuum too low | Increase the powder quantity and / or total air volume on the control unit |
| Insert sleeve worn , not or incorrect inserted | Replace or insert it ,observe the indexing cam |
| Insert sleeve is worm after a short operating duration | Clean the nozzle ,if damaged,replaced it |
| The gun does not spray powder although the control unit is switched on and the gun trigger is pressed | 1.Connect the machine to the compressed air 2.Clean /Replace 3.Clean the corresponding 4.Contact Galin representative |
You Might Also Like
How Fiber Laser Cutting Machine Works
Shantui Mini Wheel Loader SL20wn with Best Price
Open-End Spinning Machine Made in China for Glove and Socks ......
Corten Garden Edging/Simple Garden Edging
Medical Headache High Potential Treatment Equipment
-86 Degree Lab Medical Ultra Low Super Fast Deep Freezer
Vet Treadmill (TM-260M)
Fine Polished Tapping Inner Threaded Mould Standard Parts
Rgp3 0.01mbar Oil Free Mechanical Scroll Vacuum Pump
Sexy Blue and Red Supergirl Halloween Party Dress Cosplay Co......
Women′ S Messenger Bag Canvas Souvenir Bag New Simple ......