Hand Holding Automatic Electrostatic Powder Spraying Gun with PLC Screen

China Hand Holding Automatic Electrostatic Powder Spraying Gun with PLC Screen, Find details about China Eletrostatic Spray Gun, Spraying Gun from Hand Holding Automatic Electrostatic Powder Spraying Gun with PLC Screen

Basic Info.

Model NO.

JRX

Trademark

JRX

Origin

China

Model NO.

JRX

Trademark

JRX

Origin

China

Product Desciption

Hand Holding Automatic Electrostatic Powder Spraying Gun with PLC Screen

Typical characteristics:

1, Control unit has one-touch intelligent operation button good for flat parts, complicated parts and recoat parts. Easy to operate.

2, suitable for the coating of every workpiece. Simple, flat workpieces; Workpieces with complicated shapes; The over-coating of workpieces which are already coated.

3, Pulse coating system
1). Save powder by 20% compare to Electrostatic Coating, for the average thickness of our products is 60 μ M compare to 70 μ M of the latter.
2). Can coat the objects' deepest corner by charging the powder continuously with low current and high voltage.
3). Can reduce orange peel effect significantly compare to common Electrostatic Coating machine.
Configuration:
A control unit power supply cable
- An Automatic powder gun with gun cable, powder Hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary Air (black) and fluidizing air (black)
Powder hose
Ground wire

Data:
A) Control unit
Input voltage: 110V-220V
Frequency: 50-60Hz
Input powder: 50W
Pneumatic control voltage: 24V DC
B) Compressed air data:
Max. Input air pressure: 10bar/145psi
Min input air pressure: 6bar/87psi
Max water vapour content: 1.3G/nm
C) Powder Spray Gun
Powder yield: 600g/min
Gun powder: 550G
Connection cable: 5m
Hand Holding Automatic Electrostatic Powder Spraying Gun with PLC Screen

Technical Data

Gun Weight	500g	Gun Cable	5 meters
Power source	AC 220V/110V	Frequency	50~60Hz
Power	40W	Max Output Current	150μA
Input Voltage	24V	Output Voltage	100 KV
Polarity	Negative	High Pressure Mode	Built-in
Max Power Injection	550g/min	Max Air Consumption	13Nm³/h
Pulse Frequency	15~20 Clock /S	Working Temperature Range	-10 ~45°C