Products

Infrared Thermopile Human Sensor S-810A Smart Furniture

China Infrared Thermopile Human Sensor S-810A Smart Furniture, Find details about China Sensor, Air Conditioner from Infrared Thermopile Human Sensor S-810A Smart Furniture

Model NO.
S-810A
Transport Package
The Packaging Is Solid
Origin
China
Model NO.
S-810A
Transport Package
The Packaging Is Solid
Origin
China
     
1. Product features& Applications

1. Non-contact temperature measurement
2. Medical equipment and instruments
3. Thermoelectric conversion
4. Radiation monitoring switch system
5. Consumer electronics
6. Pyrometer
7. Gas analysis
8. Agriculture
9. Animal husbandry
10. Security monitoring


2. Parameters
 
ELECTRICAL CHARACTERISTICS( at 25ºC )
     
 ITEM CONDITION RATING
6.1
      Signal Output
  • Black Body temperature: 420K
  • Chopping Frequency: 1HZ, 0.3~ 3.5HZ △f
  • Vd=5V,Rs=47KΩ,the amplifier of Gain 72.5dB
  • Measurement method shown in Fig2.
>3500mVp-p
 
6.2 Noise Output
  • Chopping Frequency:  1HZ, 0.3~ 3.5HZ △f
  • Vd=5V,Rs=47KΩ,the amplifier of Gain 72.5dB
  • Measurement method shown in Fig2.
< 70mVp-p
 
6.3 Balance output
  • Black Body temperature: 420K
  • Chopping Frequency: 1HZ, 0.3~ 3.5HZ △f
  • Vd=5V,Rs=47KΩ,the amplifier of Gain 72.5dB
  • Measurement method shown in Fig2 and Fig3.
        VA = A Element sensitivity(Vp-p)
        VB = B Element sensitivity(Vp-p)		|VA-VB|/(VA+VB) ×100%≤10%
 
6.4 Operating VoltageSingle power supply
RS=47KΩ		2~15V
6.5 Source Voltage   VD=5V,RS=47KΩ0.4~1.0V
6.6 Circuit Configuration      See Fig.3 
6.7 Warm-up Time   After it conneted, it with the measurement amplifier for Fig.3 description that turns on the power supply beforehand, the amplification output is time until stabilizing.Max: 25 Sec


7. OPTICAL CHARACTERISTICS
 
 ITEM RATING
7.1Field of View138 degrees from center of Element on Axis X.
125 degrees from center of Element on Axis Y.
See Fig 5
7.2Response wavelength bandFilter substrate:Silicon
Cut on wavelength:5.5±0.5μm
Transmission:7~14μm  ≥75%
7.3 Transmission Characteristics of filterSee Fig 6

8. ENVIRONMENTAL REQUIREMENTS
 
 ITEM RATING
8.1 Operating Tmeperature-30~70 ºC
8.2 Storage Temperatur-40~80 ººC
8.3 Relative HumidityThe sensor shall operate without increase in Noise Output when exposed to 90 to 95% RH at 30ºC continuously
8.4 Hermetic SealNo bubbles visible in the 125±5ºC fluorocarbon bath(FC-40) for 20sec
8.5 Reliability TestSpecified in Appendix1( page13~14)

9.  RoHS COMPLIANCE
This product conforms to RoHS regulatin.
10. INSPECTION
10.1  Process inspection
                 100% inspection: Item 6.1 to 6.3 and 6.5 among the electric performances of item 6.
   10.2  OUTGOING INSPECTION
                 Based on statistical sampling inspection method every manufacture lot is inspected for the electrical
                 characteristics item 6.1to 6.3 ,6.5 of the Item 6,and item 5.1 and 5.3 of the appearance of item 5.
11. PACKING
    The packaging is solid and there isn't  breakage
12.process at Failure
        In case of finding of failure incoming or process inspection after receipt of products, Both sides  negotiate to
          deal  with the failure
 		 

3. TEST CONDITION
  • Environmental temperature: 25ºC
  • Black Body temperature: 420K
  • Chopping Frequency: 1HZ, 0.3~ 3.5HZ △f
  • the amplifier of Gain 72.5dB
4. Dimension chart
Infrared Thermopile Human Sensor S-810A Smart Furniture

5.Pyroelectric Passive Infrared sensor measurement method
Infrared Thermopile Human Sensor S-810A Smart Furniture

6. TYPICAL TRANSMISSION CHARACTERISTICS OF FILTER
Infrared Thermopile Human Sensor S-810A Smart Furniture

Infrared Thermopile Human Sensor S-810A Smart Furniture







 

You Might Also Like