Products

Electrictube Furnace 1400c Slide-Able Heating Cooling Tube Furnace

China Electrictube Furnace 1400c Slide-Able Heating Cooling Tube Furnace, Find details about China Tube, Slide from Electrictube Furnace 1400c Slide-Able Heating Cooling Tube Furnace

Model NO.
GSL-1400X
HS Code
85141090
Model NO.
GSL-1400X
HS Code
85141090
1400ºC Slide-Able Heating Cooling Tube Furnace
Slide-able tube furnace with 3" IDx55" L quartz tube and flanges and a maximum working temperature up to 1350°C. One pair of sliding rails is installed on the bottom of the furnace to allow sliding the furnace from one side to another to achieve max. heating and cooling rates up to 100°C/min. For the fastest healing, the furnace may be pre-heated to the desired temperature and then be slid to the sample's position. As for the fastest cooling, the furnace can be slid to another side after sample heating is completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gases. This furnace provides an alternative for rapid thermal processing at the lowest cost.

Double-layer steel structure with dual air cooling fans
One pair of sliding rails are installed on the bottom of the furnace, which allows the furnace to be manually moved from side to side
Vacuum flanges and a digital vacuum gauge are installed for immediate use.
Sliding rail length is about 1200mm, the furnace can slide 600 mm distance
Electrictube Furnace 1400c Slide-Able Heating Cooling Tube Furnace  Electrictube Furnace 1400c Slide-Able Heating Cooling Tube Furnace
Power2.5KW
VoltageAC 208-240V Single Phase, 50/60 Hz
Max. Temperature1400°C (<1 hour)
Continuous Temperature1350°C
Heating& Cooling Rates
  Heating Rate:
15°C/sec (RT - 150°C);
10°C/sec (150°C - 250°C);
  7°C/sec (250°C - 350°C);
  4°C/sec (350°C - 500°C);
  3°C/sec (350°C - 550°C);
  2°C/sec (550°C - 650°C);
  1°C/sec (650°C - 800°C);
  0.5°C/sec (800°C - 1000°C);		Cooling Rate:
15°C/sec (1000 - 950°C);
10°C/sec (950°C - 900°C);
7°C/sec (900°C - 850°C);
4°C/sec (850°C - 750°C);
2°C/sec (750°C - 600°C);
1.5°C/sec (600°C - 500°C);
1°C/sec (500°C - 400°C);
0.5°C/sec (400°C - 300°C);		Note:
The max heating and cooling rate are achieved by pre-heat one side of the processing tube to the target temperature and then slide the furnace to the other side. You may choose to place the sample in the pre-heat area or not.
Heating Zone Length440mm ( single zone )
Constant Temperature Zone120mm (+/-1°C @ 400-1200°C)
Heating ElementsFe-Cr-Al Alloy doped by Mo
Processing Tube SizeHigh purity fused quartz tube
Size:  OD: 3.2" x  ID: 3.0" x Length: 55" (inch)   or  OD:  80 x ID 75 x Length 1400  ( mm)
Two foam ceramic blocks are included which must be placed inside the tube to avoid heat radiation damaging the O-ring
Temperature ControllerPID automatic control with 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
      
Temperature Accuracy+/ - 1°C
Vacuum FlangesStainless steel vacuum flanges are installed on both ends of the tube with heavy-duty support.
Right flange:  KF-25 pump connector and needle valve.
Left flange: one needle valve and 1/4" thermocouple feed-through and digital vacuum gauge.
An 24" length x 1/4" dia. K-type thermocouple (included) connected to an Omega temperature calibrator (included) will be inserted through this flange to monitor the heating and cooling rates of the sample's position during furnace sliding.
Vacuum LevelLimited by pump ( pump is not included, click on pictures to order )
10E-5 torr can be reached by molecular pump
10E-2 torr by a mechanical pump.
     
Sliding Rails / TableDouble sliding rail made by Cr plated steel
Sliding length: 1200 mm
Dimensions550 x 380 x 520  mm ( furnace only)
1500 x 380 x 620 mm ( furnace + sliding )
Net Weight~ 100 Kg
Shipping Package Size70" x 45" x 45" (inch)
Shipping Weight350 lbs
WarrantyOne-year limited manufacturer's warranty (Consumable parts such as processing tubes, O-rings, and heating elements are not covered by the warranty, please order replacements at related products below).
FAQ:
1. Is your company accepting customization?
We have our own factory and excellent technical team, and we accept OEM service.

2. We are not professional in the operation and installation of your machine?
While it is not a stumbling block, our machine is easy to operate, no need to be professional, and the instruction manual and video sent to you are enough. What's more, we have professional engineers and they can solve all questions.

3. Which shipment is available?
By sea, by air, by express, or as your requirement.

4. Do you inspect the finished products?
Yes, each step of production and finished products will be carried out inspection by the QC department before shipping.

You Might Also Like