Products

ISO3923 Scott Powder Apparent Density Meter

China ISO3923 Scott Powder Apparent Density Meter, Find details about China Apparent Density Tester, Powder Apparent Densimeter from ISO3923 Scott Powder Apparent Density Meter

Model NO.
MZ-101
Trademark
Mayzum
Origin
China
Model NO.
MZ-101
Trademark
Mayzum
Origin
China
ISO3923 Scott Powder Apparent Density Meter

MZ-101

ISO3923 Scott Powder Apparent Density Meter
Feature:


Principle:

Place the powder into the upper mesh sieve, flow into the clothing box by the nature or outside force, powder flow into four pcs glass baffles and square funnel with angle 25°, at last flow into sample receiving cup, it is in the bulk type. Customer can weigh the powder weight in the cylindrical receiving cup;
 
ISO3923 Scott Powder Apparent Density Meter is designed and produced according to GB5060-85 < Metal Powder Density Testing Second part: Scott Volumeter>, it is also in accordance with International standard ISO 3932/2<Metal Powder Bulk Testing Second part: Scott Volumeter>,It is suitable for powder can not flow into funnel freely with opening size at 5mm or the powder characteristic will be charged during vibrating funnel.


Structure:


ISO3923 Scott Powder Apparent Density MeterISO3923 Scott Powder Apparent Density MeterISO3923 Scott Powder Apparent Density MeterISO3923 Scott Powder Apparent Density Meter
 


Sampling

1 For each sample to be tested, take at least 100cm3 and divide into 3 portions.

2 Usually, test the bulk powder as it is. For special ones user has to dry it. Dry powders subject to oxidize in vacuum or inert gases. Drying is not allowed on samples subject to volatize. 


Operations

1 Take sample carefully on spoon and put them on the sieve in the Top Funnel Complex. The powder passes through the Chamber, Square Funnel and finally is loaded in the Cylinder Cup, stop loading if power spills.

2 Brush powders that fail to freely pass the sieve. If it is really difficult or not possible, user has to use other device. 

3 Level the surface of the Cylinder Cup with a spatula. Please do not press the inner powder or taking them out, or shake or vibrate the Cylinder Cup.

4 After leveling, tap the Cylinder Cup gently to make the powder sag. Please do not lost powder in transit or leave powder on outer surface of the Cup.

5 Weigh the inner powder to the accuracy of 0.05 gram.


Test Report

For users with Tap Density Volumeter, such procedure becomes much easier. Simply set Tap Number 0 and Volume 25, input Weight as it is then press Calculate to show the results, then press Print for Test Report.

For users don't have such unit, please note down manually the following: 

1 sample specifications;
2 sample processing;
3 test results;
4 operator;
5 other info.


Company Profile:

ISO3923 Scott Powder Apparent Density MeterISO3923 Scott Powder Apparent Density Meter

Certification:
 
ISO3923 Scott Powder Apparent Density Meter
ISO3923 Scott Powder Apparent Density Meter

ISO3923 Scott Powder Apparent Density Meter
ISO3923 Scott Powder Apparent Density Meter


FAQ:

1.How about quality and warranty of our products?

We can guarantee the warranty for two years from the date of receipt. If our machine fails to perform properly because of defects in materials or workmanship during two years warranty, We will be responsible for fixing or replacing new machine .

2.How about after-sales service

(1)If errors occur, please refer to the troubleshooting tips of the instruction manual

(2)Please contact with our after-sales service department or distribution in time if can't clear fault

(3)When you contact us with a service problem, we will act within 12 hours and provide solution within 24 hours.

 
(5)If the product have some big troubles and it must be sent back to our factory to repair during its warranty period, you just need to shipping the product to us and we will sent you a new one.The service is excluding if the machine is breakdown caused by following reasons:

a:Wrong operation

b:Fixed or refitted personally

c:The machine itself is not the reason caused breakdown

d:Applying the machine under the serious condition. Such as high temperature, moist, corrosive gas, or vibration.

e:Move or transportation as soon as installed

f:Consumables and easy-loss components

g:Natural disaster


3.How many days can you receive the products?

Product in stock will be sent within 48 hours. Delivery time is about 5-7 days.
Some products are not in stock, please consult the sales staff for details.



4.How to shipping the product?

Product will be sent by International Express by air. Such as DHL, UPS, FEDEX, TNT, SF.


5.What is our return policy?

You are allowed to return goods within 7 days from the date of receipt. To return products,please contact our customer service with your invoice number, the item to be returned and the reason for the return. Goods must be returned freight prepaid. Returns will be subject to a restocking charge. Products can not be returned back when the products have been used or modified.


6.Are we manufacturer made copy product or original product?

We are the original manufacturer for densimerter, Mayzum is our own brand. The model starts with MZ and MAY are belong to us generally.


7.Why choose us?

MAYZUM have been specialized in density field since 2009. Qun Long as a professional density meter supplier , has maintained a constant belief:First - class quality , professional technology team and services team,ample supply and prompt delivery.

You Might Also Like