China S-1100-110 Customized AC to DC 110V 10A 1100W DC Power Supply for Equipment System 12V/24V/36V/48V/60V/90V/120V/150V/200V/300V, Find details about China Equipment Power Supply, AC DC Power Supply from S-1100-110 Customized AC to DC 110V 10A 1100W DC Power Supply for Equipment System 12V/24V/36V/48V/60V/90V/120V/150V/200V/300V
MODEL | HSJ-1100-110 | |
OUTPUT | DC VOLTAGE | 110V |
RATED CURRENT | 10A | |
CURRENT RANGE | 0 ~ 10A | |
RATED POWER | 1100W | |
RIPPLE & NOISE (max.) Note.2 | 600mVp-p | |
VOLTAGE ADJ. RANGE | 100-120V | |
VOLTAGE TOLERANCE Note.3 | ±3.0% | |
LINE REGULATION | ±0.5% | |
LOAD REGULATION | ±2.0% | |
SETUP, RISE TIME | 2500ms, 50ms/230VAC | |
HOLD UP TIME (Typ.) | 20ms/230VAC | |
INPUT | VOLTAGE RANGE | 90 ~ 132VAC / 176 ~ 264VDC |
FREQUENCY RANGE | 47 ~ 63Hz | |
EFFICIENCY (Typ.) | 90% | |
AC CURRENT (Typ.) | 1.8A/230VAC 0.9A/230VAC | |
INRUSH CURRENT(Typ.) | 60A/230VAC | |
LEAKAGE CURRENT | <2mA / 240VAC | |
PROTECTION | OVER LOAD | 105 ~ 140% rated output power |
Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 115%-150% shunt down O/P voltage,re-power on to recover. | |
Protection type :Hiccup mode, recovers automatically after fault condition is removed | ||
OVER TEMPERATURE | Shut down O/P voltage, recovers automatically after temperature goes down | |
ENVIRONMENT | WORKING TEMP. | -20 ~ +60°C (Refer to derating curve) |
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |
STORAGE TEMP., HUMIDITY | -20 ~ +85°C , 10 ~ 95% RH | |
TEMP. COEFFICIENT | ±0.03%/°C (0~50°C) | |
VIBRATION | 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes | |
SAFETY | SAFETY STANDARDS | U60950-1 approved |
WITHSTAND VOLTAGE Note 6 | I/P-O/P:3.0KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH | |
OTHERS | MTBF | 235K hrs min. MIL-HDBK-217F (25°C ) |
DIMENSION | 240*125*65mm (L*W*H) | |
PACKING | 1.8Kg; 10pcs 19Kg/ctn | |
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. |