Products

Clear Smart Card Crystal Epoxy Resin

China Clear Smart Card Crystal Epoxy Resin, Find details about China Epoxy Resin, Epoxy Glue from Clear Smart Card Crystal Epoxy Resin

Model NO.
607A/B
Characteristic
Good Toughness, Waterproof, Good Flowing Property
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
Shelf Life
Six Months
Components Rate
3:1
Package
5kgs 20 Kgs
MOQ
20 Kgs
Lead Time
3 Days
Trademark
Jinhua glue
Transport Package
20kg/Set, Carton
Specification
ROHS, REACH, CPSIA, PAHS
Origin
Shenzhen, Guangdong, China
HS Code
3506912000
Model NO.
607A/B
Characteristic
Good Toughness, Waterproof, Good Flowing Property
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
Shelf Life
Six Months
Components Rate
3:1
Package
5kgs 20 Kgs
MOQ
20 Kgs
Lead Time
3 Days
Trademark
Jinhua glue
Transport Package
20kg/Set, Carton
Specification
ROHS, REACH, CPSIA, PAHS
Origin
Shenzhen, Guangdong, China
HS Code
3506912000
Epoxy resin No.: 607 A/B
Epoxy resin Specification:8kg/set

Clear Smart Card Crystal Epoxy Resin

[Main Component of epoxy resin glue]
A component is resin, B component is curing agent.
                           The main agent 607A               Curing agent 607B
Color:                    Colorless transparent           Colorless transparent
Specific gravity:                   1.15                                      1.15
Viscosity25° C:              150-400CPS                      100MAXCPS

[Feature]
Epoxy resin 607AB is based on the room temperature, having the features of:
(1) good flowing property, natural defoaming, high transparency
(2) good toughness and room temperature or heating curing softness is good
(3) good surface

Clear Smart Card Crystal Epoxy Resin
[Scope Of Application]
The products of this series are widely used for the LED potting, signs, nameplate, the surface encapsulation of the badge or transparent perfusion of electronic components.

[Conditions of usage]
1)Mixing ratio: A: B = 100: 33(weight ratio)-->3: 1
2)Hardening conditions: 25° C × 10-13 h or 55° C × 2 h (2 g)
3)Usable time: 25° C × 45min

Clear Smart Card Crystal Epoxy Resin
[Using Method]
1. Working environment: The container of holding glue please keep clean, A and B part should be in accordance with the weight ratio, weigh accurately, mix fully along the container wall by clockwise and use after 3 to 5 minutes.
2. According to the operational time and dosage of mixing rubber, avoid wasting. When the temperature below 15° C, please put A glue to glue again after warm up to 30° C, easy to operate, (a glue will be thicken when low temperature ); Must be sealed lid after use, avoid product rejection caused by moisture absorption.
3. When the relative humidity is more than 85%, the curing surface easy to absorb moisture in the air, form a layer of white mist, so when the relative humidity is more than 85%, is not suitable for room temperature curing, suggest to use the heat curing.

[Warning]
1. The operating environment should be ventilative and should keep away of the fire. Closely sealed after use.
2. Avoid the glue contact the skin and the eye, if contacts the skin, with soap and clear water cleaning, if touches the eye carelessly, uses the clear water to flush and to see a doctor immediately.
3. If the liquid cement has the stratification when used for a long time, use after the agitation evenly, do not affect its product quality
4. Take strict precautions against touching by the kids and entering into the mouth.
5. Please make a trial to avoid usage mistakes before application.

[Storage And Packing]
Stock the products in the air-tight seal at the temperature of 25° C. The shelf life is half a year. It is available to use based on passing of the test if being beyond the shelf life.


 
The properties after hardening
1)Withstand voltage     KV/mm  38
2) Dielectric constant 1KHZ 3.7
3) Moisture absorption % 24 hours < 0.1
4) Flexural strength Kg/mm2  28
5) Volume resistivityOhm31x1015
6) Induced electric loss1KHZ   0.42
7)Compressive strengthKg/ mm2  8.4
8) Impact strength Kg/ cm/cm2 6.8
9) Surface resistance Ohmm25X1015


FREE SAMPLE IS AVAILABLE!!! We professional produce and market all kinds of epoxy resin AB glue which covers a very large range of applications: Soft AB glue for stickers, LED strip potting, badge, nameplate, nail cutters, keychain; Hard clear resin for LED channel letters, photo frame coating, hand made diamond, jewelry, crafts, anything you can image clear and shinning, but cheap and easy to operate; Coating resin for surfboard, paddle, christmas ball, globe, foam products coating, Epoxy flooring, to make it hard and durable!!!Pls contact us to discuss your application for a best EPOXY SOLUTION!!! 

You Might Also Like