1.,ISO 9001, ISO 14001,OHSAS18001,CE &TS Certification

2.18 months warranty

3.Short delivery time

About Product

Y Strainer Screwed End   is made from the wcb material for the body. It's also used in applications where the amount of solids to be removed is small, and where frequent clean-out is not required.
They are most often installed in gaseous services such as steam, air, nitrogen, natural gas, etc.
The compact, cylindrical shape of the Y-strainer is very strong and can readily accommodate the high pressures that are common in this type of service. Pressures up to 6000 psi are not unusual.
When steam is being handled, high temperature can be an additional complicating factor.  A steam pressure of 1500 psi will often be found at temperatures of 1000°F.


Y strainer and Y filter PN10/16
Size:
DN50-DN500
End flange:
ANSI B 16.1,EN1092,AS2129
Face to face:
ANSI B 16.10
Top flange:
ISO 5211
Normal pressure:
PN1.0/1.6MPa(150/200PSI)
Body:
CI/DI/WCB/ALB/CF8/CF8M
Disc:
DI/ALB/Rubber lined Disc/1.2501/1.4529/CF8/Hastelloy Alloy/Monel
Stem:
410/416/304/431/17-4PH/316/monel
Seat:
NBR/Hypalon/EPDM/Neoprene/NR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White EPDM/EPDM/PTFE
Suitable temperature:
-10~120
Medium:
Fresh water, sewage, sea water, air, vapor, food, medicine, oils, alkalis, salt etc.