Mgn15c Mgn15W Mgn12 for 3D Printer Hiwin Linear Guide Rail

HIWIN direct system is a kind of rolling guidance. Through the infinite rolling cycle between the sliding block and the guide rail by steel balls, the load platform can easily move linearly with high precision along the guide rail. Compared with the traditional sliding guidance, the friction coefficient of rolling guidance can be reduced to the original 1 / 50. Because the starting friction is greatly reduced and relatively less ineffective movement occurs, it can be achieved easily μ M-stage feeding and positioning. In addition, the design of the bundle unit between the sliding block and the guide rail makes the linear guide rail bear the load in the up, down, left, right and other directions at the same time. The above display characteristics are not comparable to the traditional sliding guidance. Therefore, if the machine can be equipped with ball screws and use the linear guide rail as guidance, the equipment accuracy and mechanical efficiency will be greatly improved.

HIWIN silver linear guide slide type, silver linear guide slide full model, square linear guide slide model hgh15ca, hgh20ca, hgh25ca, hgh30ca, hgh35ca, hgh45ca, hgh55ca, hgh65ca,

Tetragonal ordinary hgh20ha, hgh25ha, hgh30ha, hgh35ha, hgh45ha, hgh55ha, hgh65ha,

Square lengthened flange type linear guide slider models: hgw15ca, hgw20ca, hgw25ca, hgw30ca, hgw35ca, hgw45ca, hgw55ca, hgw65ca,

Flange common locking type hgw15cb, hgw20cb, hgw25cb, hgw30cb, hgw35cb, hgw45cb, hgw55cb, hgw65cb,

Flange common through-hole type hgw15cc, hgw20cc, hgw25cc, hgh30cc, hgh35cc, hgh45cc, hgh55cc, hgh65cc,

Flange common upper and lower lock type hgw20ha, hgw25ha, hgw30ha, hgw35ha, hgw45ha, hgw55ha, hgw65ha,

Flange extended locking type hgw20hb, hgw25hb, hgw30hb, hgw35hb, hgw45hb, hgw55hb, hgw65hb,

Flange extended through-hole type hgw20hc, hgw25hc, hgh30hc, hgh35hc, hgw45hc, hgw55hc, hgw65hc,

Flange lengthening type, locking type, assembled square type linear guide slide block models hgl15ca, hgl25ca, hgl30ca, hgl35ca, hgl45ca, hgl55ca,

Tetragonal ordinary hgl25ha, hgl30ha, hgl35ha, hgl45ha, hgl55ha,

Square extended eg ball type low assembly specification linear guide rail model square linear guide slider model egh15ca, egh20ca, egh25ca, egh30ca, egh35ca,

Sifang ordinary egh15sa, egh20sa, egh25sa, egh30sa, egh35sa,

Square compact (two mounting holes) flange type linear guide slider models egw15ca, egw20ca, egw25ca, egw30ca, egw35ca,

Flange common locking type egw15cb, egw20cb, egw25cb, egw30cb, egw35cb,

Flange common through-hole type egw15sa, egw20sa, egw25sa, egw30sa, egw35sa,

Flange compact locking type (two mounting holes) egw15sb, egw20sb, egw25sb, egw30sb, egw35sb,

Flange compact through-hole (two mounting holes) QH ball silent high assembly specification linear guide model square linear guide slider model qhh15ca, qhh20ca, qhh25ca, qhh30ca, qhh35ca, qhh45ca,

Sifang ordinary qhh20ha, qhh25ha, qhh30ha, qhh35ha, qhh45ha,

Square lengthened flange type linear guide slide block models: qhw15ca, qhw20ca, qhw25ca, qhw30ca, qhw35ca, qhw45ca,

Flange common locking type qhw15cb, qhw20cb, qhw25cb, qhw30cb, qhw35cb, qhw45cb,

Flange common through-hole type qhw15cc, qhw20cc, qhw25cc, qhh30cc, qhh35cc, qhh45cc,

Flange common upper and lower lock type qhw20ha, qhw25ha, qhw30ha, qhw35ha, qhw45ha,

Flange extended locking type qhw20hb, qhw25hb, qhw30hb, qhw35hb, qhw45hb,

Flange extended through-hole type qhw20hc, qhw25hc, qhh30hc, qhh35hc, qhw45hc,

Flange lengthening type locking type QE ball type silent type low assembly specification linear guide rail model square linear guide rail slider model qeh15ca, qeh20ca, qeh25ca, qeh30ca, qeh35ca,

Sifang ordinary qeh15sa, qeh20sa, qeh25sa, qeh30sa, qeh35sa,
Square compact (two mounting holes) flange linear guide slider models qew15ca, qew20ca, qew25ca, qew30ca, qew35ca,
Flange common locking type qew15cb, qew20cb, qew25cb, qew30cb, qew35cb,

Flange common through-hole type qew15sa, qew20sa, qew25sa, qew30sa, qew35sa,
Flange compact locking type (two mounting holes) qew15sb, qew20sb, qew25sb, qew30sb, qew35sb,

Flange compact through-hole type (two mounting holes) RG roller type specification linear guide model square linear guide slider model rgh15ca, rgh20ca, rgh25ca, rgh30ca, rgh35ca, rgh45ca, rgh55ca, rgh65ca,

Tetragonal ordinary rgh20ha, rgh25ha, rgh30ha, rgh35ha, rgh45ha, rgh55ha, rgh65ha,
Square lengthened flange linear guide slider models: rgw15ca, rgw20ca, rgw25ca, rgw30ca, rgw35ca, rgw45ca, rgw55ca, rgw65ca,
Flange common locking type rgw15cc, rgw20cc, rgw25cc, rgh30cc, rgh35cc, rgh45cc, rgh55cc, rgh65cc,

Flange common upper and lower lock type rgw20ha, rgw25ha, rgw30ha, rgw35ha, rgw45ha, rgw55ha, rgw65ha,
Flange extended locking type rgw20hc, rgw25hc, rgh30hc, rgh35hc, rgw45hc, rgw55hc, rgw65hc,

Flange lengthened locking micro linear guide, square linear guide slider models mgn7c, mgn9c, mgn12c, mgn15c,
Tetragonal ordinary mgn7h, mgn9h, mgn12h, mgn15h,

Square extended flange linear guide slider models mgw7c, mgw9c, mgw12c, mgw15c,
Flange common type mgw7h, mgw9h, mgw12h, mgw15h,

Our Advantages:
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer's requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 
SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost. 
3. It's better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS standard bearings. 
2. MOQ: 1000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don't disclose any info.