Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical

China Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical, Find details about China Medical Cast Saw, Electric Bone Saw from Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical

Basic Info.

Model NO.

AXS-II Plaster Saw Medical

Trademark

OEM

Transport Package

Alluminum Case

Origin

China

Model NO.

AXS-II Plaster Saw Medical

Trademark

OEM

Transport Package

Alluminum Case

Origin

China

Product Desciption

Cut all kinds of bandages,like plaster bandage,fiberglass casting tape etc.

Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical

Electric plaster saw is the new generation product designed and researched according to the clinical operation experience. The motor adopts double insulation protection device and guarantees the safety of operators and the wounded. The product features strong motive power, smart design, stable operation, small vibration, low noise, safety and reliability.
Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical

Directly contact:
Sale manager: Jenny

Technical Parameters of orthopedic cast saw

1. Power Voltage: 110V or 220V / 50Hz;
Input Power: 115VA

2. Maximum swing times: 12750-17250 times/min;

3. Swing angle of the plaster saw: 60±10

4. Whole machine weight:575g;

5. Overall dimensions: 260*60*53mm

Notes for Medical Electric Plaster Saw

1. The main engine and electric wire are forbidden to be dipped in disinfectant for disinfection or high temperature disinfection.

2. Clean the surface with soft cotton cloth and neutral soap solution after use. Organic solvent and hard materials are for bidden.

3. The saw shall be stored in ventilated and dry environments instead of places higher than 40ºC. Lay it into the box and avoid collision and impact during transportation.

4. Generally speaking, stop use if output frequency reduction, impotent output or high noise appears during operation, or it will damage the motor or even hurt the operators.

5. If the saw hasn't been applied for a long time or it is applied in damp environment, the insulation resistance between the machine cover and winding shall be measured with a 50ohm meter. If it is less than 7ohm, drying treatment shall be done to the winding until the insulated resistance is above 7ohm.

	Medical Plaster Cutting Saw	Quantity
	hand piece	1
	saw blades	Round 65mm dia. Blade Round 42mm dia. Blade Universal Plaster Cutting Blade
	aluminum alloy case	1
	Spanner	1
	manual	1

Operation of Medical Orthopedic cast cutter

1). Remove the main unit, spanner and saw blades from the case.

2). Use the spanner to unscrew the blade holder

3). Once the blade holder is loose remove it from the unit 4). Place your chosen blade on the drive shaft

5). Tighten the blade holder back onto the unit

6). Secure the blade into place using the spanner

7). The saw is now assembled ready for use. When finished, simply repeat these steps.

Speed Setting Function Orthopedic Aluminum Alloy plaster cutting saw blades Electric Plaster Saw
Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical

After-sales Service Commitment

The saw can be repaired freely within half a year
of quality problems occur.

Besides, it adopts one-year guarantee period.
During the guarantee period, only the material will be charged.

Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical Factory Price Orthopedic Medical Surgical Power Tool Plaster Saw Medical