Products

Medical Instruments 50Hz Plaster Saw Medical Electric Cast Cutter

China Medical Instruments 50Hz Plaster Saw Medical Electric Cast Cutter, Find details about China Electric Plaster Remover, Plaster Cutting Cast Saw from Medical Instruments 50Hz Plaster Saw Medical Electric Cast Cutter

Model NO.
AXS-II electric cast cutter
Trademark
OEM
Transport Package
Alluminum Case
Origin
China
Model NO.
AXS-II electric cast cutter
Trademark
OEM
Transport Package
Alluminum Case
Origin
China


Cut all kinds of bandages,like plaster bandage,fiberglass casting tape etc.

medical instruments 50hz plaster saw medical electric cast cutter
Electric plaster saw is the new generation product designed and researched according to the clinical operation experience. The motor adopts double insulation protection device and guarantees the safety of operators and the wounded. The product features strong motive power, smart design, stable operation, small vibration, low noise, safety and reliability.
Medical Instruments 50Hz Plaster Saw Medical Electric Cast Cutter
Directly contact:
Sale manager: Jenny
 
 
Medical Instruments 50Hz Plaster Saw Medical Electric Cast Cutter
Technical Parameters of orthopedic cast saw
1. Power Voltage: 110V or 220V / 50Hz;
Input Power: 115VA 
2. Maximum swing times: 12750-17250 times/min; 
3. Swing angle of the plaster saw: 60±10 
4. Whole machine weight:575g; 
5. Overall dimensions: 260*60*53mm
Notes for Medical Electric Plaster Saw 
1. The main engine and electric wire are forbidden to be dipped in disinfectant for disinfection or high temperature disinfection. 
2. Clean the surface with soft cotton cloth and neutral soap solution after use. Organic solvent and hard materials are for bidden. 
3. The saw shall be stored in ventilated and dry environments instead of places higher than 40ºC. Lay it into the box and avoid collision and impact during transportation. 
4. Generally speaking, stop use if output frequency reduction, impotent output or high noise appears during operation, or it will damage the motor or even hurt the operators. 
5. If the saw hasn't been applied for a long time or it is applied in damp environment, the insulation resistance between the machine cover and winding shall be measured with a 50ohm meter. If it is less than 7ohm, drying treatment shall be done to the winding until the insulated resistance is above 7ohm.
               Medical Instruments 50Hz Plaster Saw Medical Electric Cast Cutter                        
Medical Plaster Cutting Saw
Quantity
hand piece
1
saw blades
Round 65mm dia. Blade
Round 42mm dia. Blade
Universal Plaster Cutting Blade
aluminum alloy case
1
Spanner
1
manual
1
Operation of Medical Orthopedic cast cutter
1). Remove the main unit, spanner and saw blades from the case. 
2). Use the spanner to unscrew the blade holder
 3). Once the blade holder is loose remove it from the unit 4). Place your chosen blade on the drive shaft 
5). Tighten the blade holder back onto the unit 
6). Secure the blade into place using the spanner 
7). The saw is now assembled ready for use. When finished, simply repeat these steps.
Speed Setting Function Orthopedic Aluminum Alloy plaster cutting saw blades Electric Plaster Saw
Medical Instruments 50Hz Plaster Saw Medical Electric Cast Cutter
Medical Instruments 50Hz Plaster Saw Medical Electric Cast Cutter
After-sales Service Commitment
The saw can be repaired freely within half a year
of quality problems occur. 
Besides, it adopts one-year guarantee period.
During the guarantee period, only the material will be charged.
medical instruments 50hz plaster saw medical electric cast cutter medical instruments 50hz plaster saw medical electric cast cutter medical instruments 50hz plaster saw medical electric cast cutter medical instruments 50hz plaster saw medical electric cast cutter

You Might Also Like