DC Pulse Public Toilet Automatic Water Flush Control Solenoid Valve Electromagnetic Switch

China DC Pulse Public Toilet Automatic Water Flush Control Solenoid Valve Electromagnetic Switch, Find details about China Horizontal Solenoid Valve, Induction Flush Switch from DC Pulse Public Toilet Automatic Water Flush Control Solenoid Valve Electromagnetic Switch

Basic Info.

Model NO.

FD-08A-4

Pulse Width

≥30ms

Operating Pressure

0.02MPa-0.8MPa

Responding Time

Open≤0.15s Close≤0.5s

Trademark

Fuxin

Transport Package

Carton

Specification

Ordinary

Origin

Prc

HS Code

8481802190

Model NO.

FD-08A-4

Pulse Width

≥30ms

Operating Pressure

0.02MPa-0.8MPa

Responding Time

Open≤0.15s Close≤0.5s

Trademark

Fuxin

Transport Package

Carton

Specification

Ordinary

Origin

Prc

HS Code

8481802190

Product Desciption

Sensor Sanitary Ware Urinal Solenoid Valve
Item No. : FD-08A-4 Special Designed For Unnormal Connector Type

The valves are applied in the automatic system for Infrared faradic sanitary of faucet, Urinal flusher and so on. There are three cavities in the valve body to adjust the pressure ,reduce the resistance when the valve core is moving in the cavity ,also absorb the impact of medium to valve body while switching. Which improve the stability of valve and extend the service life, narrow the pulse width upon the max or min pressure . Special self-clean feature makes the easy anti-blocking ability .

Rated voltage: 6VDC
Coil Resistance: 17.5Ω±0.5Ω(20ºC)
Switch Mode: DC Pulse
Pulse Width ≥25ms
Working Pressure 0.02Mpa-0.8Mpa
Medium Temperature: 1~75ºC
Responding Time: Open≤0.15s Close≤0.5s
Flux Performance: 0.02Mpa≥3L/min 0.1Mpa≥16L/min 0.8Mpa≥40L/min
Service Life ≥1000000times

Technical Feature 08 series
Instruction

Rated Voltage	DC6V	DC12V	DC24V
Coil resistance	16Ω ±0.5Ω(20ºC)	36Ω± 5Ω(20ºC)	130Ω ±5Ω(20ºC)
Min current	250mA	300mA	166mA
Switch mode	DC pulse(latching type)	AC and DC continuous(normal closed type)
Pulse width	≥30ms
Operating pressure	0.02Mpa-0.8Mpa
Media temperature	1ºC--75ºC
Responding time	Open ≤0.15s close≤0.5s

DC Pulse Public Toilet Automatic Water Flush Control Solenoid Valve Electromagnetic Switch

Performance test

Strength test	Static pressure 1.6MPa		Withstand voltage pressure		1.2MPa/5min
No-load test	Voltage 3.6V pulse width 30ms		Permissible limiting voltage		V*1.15
High water pressure start and close	At water pressure 0.8MPa,voltage DC4.5V,pulse width 30ms,the solenoid valve can be started and closed normally
low water pressure start and close	At water pressure 0.02MPa,voltage DC4.5V,pulse width 30ms,the solenoid valve can be started and closed normally
Leakage upon high water pressure	1.2MPa without leakage
Leakage upon low water pressure	0.02Mpa leakage≤0.1ml/min
Electric strength	Among conductive part, mounting hole and nonconductive metal, it can withstand 1500V/50Hz,leakage current 0.75mA for 1 min without the breakdown
Insulation resistance	The resistance between the charged part and nonconductive metal part tested by megohm meter of 500V ≥100MΩ
Sealing test	Static pressure	Air		High pressure	1MPa
				Low pressure	0.02MPa
		Cold water		High pressure	1.2MPa
				Low pressure	0.02MPa
		Hot water		High pressure	0.8MPa
				Low pressure	0.02MPa
Service life	≥1000000 cycles(CJ/T 194-2004)

Requirements of working environment

Temp of working environment	1ºC--60ºC	Permissible limiting pressure(water)	≤1.2MPa
Humidity of working environment	35%-90% RH	Mounting direction	It is mounted in vertical. The inclination do not exceed 15 degrees
Storage temp	-5--80ºC( no freezing state)	Storage humidity	25%--95% RH(No condensation state)