Products

Water Bottle Blower / Pet Bottle Blowing Equipment with Four Cavities

China Water Bottle Blower / Pet Bottle Blowing Equipment with Four Cavities, Find details about China Pet Bottle Blower, Bottle Blowing Machine from Water Bottle Blower / Pet Bottle Blowing Equipment with Four Cavities

Model NO.
BM-A4
Suitable Preform Material
Pet Preforms
Suitable Bottle Size
100ml-2000ml
Capacity
3000-4000PCS/H
Max. Bottle Neck Diameter
28-38mm
Max. Bottle Diameter
65mm
Max. Bottle Height
280mm
Installation Power
41kw
Dimension
3400*1600*1900mm
Weight
2000kgs
Name
Water Bottle Blower / Pet Bottle Blowing Equipment
Trademark
BORUN
Transport Package
Wooden Case
Specification
Automatic machine with 4 cavities
Origin
China
HS Code
8477300000
Model NO.
BM-A4
Suitable Preform Material
Pet Preforms
Suitable Bottle Size
100ml-2000ml
Capacity
3000-4000PCS/H
Max. Bottle Neck Diameter
28-38mm
Max. Bottle Diameter
65mm
Max. Bottle Height
280mm
Installation Power
41kw
Dimension
3400*1600*1900mm
Weight
2000kgs
Name
Water Bottle Blower / Pet Bottle Blowing Equipment
Trademark
BORUN
Transport Package
Wooden Case
Specification
Automatic machine with 4 cavities
Origin
China
HS Code
8477300000
Water Bottle Blower / PET Bottle Blowing Equipment With Four Cavities
 
BM-A4 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

Equipment List:
No.NAMEMODELPOWERQUANTITY
1Blow Molding MachineBM-A441KW1set
2Preform unscramblerSP-A4
3HP Air Compressor 4.8m3/min/30Kg60KW1set
4Cold dryer system4.0m3/min/30Kg2KW1set
5LP Air Compressor1.6 m3/min/10Kg15KW1set
6Cold dryer system2.0 m3/min/30Kg0.45KW1set
7Air Tank1m3/min/30Kg/1set
8Mold Chiller5HP4.6KW1set
9High-pressure oil pipe  15m
10Blowing mold500ml4cavities/1set
1000ml4cavities/1set
1500ml4cavities/1set
2000ml4cavities/1set
11Spare parts  1set
12Installation tools  1set

Water Bottle Blower / Pet Bottle Blowing Equipment with Four Cavities
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Use SMC air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
Technical parameters:
ItemBM-A4
Bottle type specificationCavity4
Theory output3000-4000
Max.volume2L
Bottle mouth maximum overall diameter28-38mm
Bottle biggest diameter65mm
Bottle maximum height280mm
Power specificationsLight tube quantity32pcs
Light tube power1.5KW
Maximum heating power40KW
All electric machine installation41KW
Actual consumption20KW
Air pressure specificationWork pressure7-9kg/cm2
Low-pressure gas consumption1600L/min
Blow bottle pressure25-35kg/cm2
Higher -pressure gas consumption1500Ltr/min
Forzen water specificationWork pressure5-6 kg/cm2
Temperature range10ºC
Consumption5000kcal/hr
Forzen water flow50L/min
Machine specificationSize of the machine3.4x1.6x1.9
Weight of the machine2ton
 
Main parts:
NameBrandOriginal
CylinderSMCJapan
valveSMCJapan
Photoelectric switchXINCHINA
Touch screenMCGSCHINA
PLCMitsubishiJapan
TransducerSMCJapan
servo motorHUICHUANGCHINA
 
Free spare part list:
NUMBERNAMEQTY/SET
1Lamp10
2Seal ring10
3Tool box1
4stop button1
5starting switch1
6connector20
7Detection switch1
8Magnetic switch4
9Pressure regulating table1
10Temperature control module2
Water Bottle Blower / Pet Bottle Blowing Equipment with Four Cavities
Fuctions of the accessory machines:

Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmosphere to the required pressure.

Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.

Air filter is to clear up the impurities out of the compressed air, like carbon hydrogen, tiny dust and solid particles.

Air tank is to keep the air stable ,to protect the Hp air compressor.
 
Water Chiller is to Cool the mould ,to prolong the life of the mould.

Water Bottle Blower / Pet Bottle Blowing Equipment with Four Cavities

You Might Also Like