12V 240ah Deep Cycle Sealed Lead Acid AGM Solar Battery

China 12V 240ah Deep Cycle Sealed Lead Acid AGM Solar Battery, Find details about China Battery, Deep Cycle Battery from 12V 240ah Deep Cycle Sealed Lead Acid AGM Solar Battery

Model NO.
ML12-240
Installation
Fixed
Rechargeable
Chargeable
Design Service Life
10 Years
Warranty
1.5 Years
Certificate
Ce, UL, MSDS, ISO14001, ISO9001
Trademark
Sunstone Power or OEM
Transport Package
Carton+Pallet
Specification
521*209*203(208)mm
Origin
Yunnan, China
HS Code
85072000
Model NO.
ML12-240
Installation
Fixed
Rechargeable
Chargeable
Design Service Life
10 Years
Warranty
1.5 Years
Certificate
Ce, UL, MSDS, ISO14001, ISO9001
Trademark
Sunstone Power or OEM
Transport Package
Carton+Pallet
Specification
521*209*203(208)mm
Origin
Yunnan, China
HS Code
85072000
Deep Cycle Maintenance Free AGM Type VRLA SLA Battery 12v 240ah for off-grid solar system, wind, photovoltaic, solar panel / inverter, power plant, UPS, emergency lighting, Solar Street Light, renewable energy, Data Center, Medical Equipment , etc

Introduction of ML series

Sunstone ML series vrla battery is designed for 10 years life. For this long life purpose, the plate are made by developed alloy which is more effectual for preventing corrosion. At the same time, we also according the percentage of alloy change the outlook and dimension of grid wire. It will give batteries more effective radius for chemical reaction. For this long life design life battery, new features include handles for easy lifting, copper terminals for higher current capacity and reduced damaged during transportation, designed to comply with EUROBAT ( draft IEC 896-2), IEEE, JIS and BS 6290 Part4, using UL certified components.

12V 240ah Deep Cycle Sealed Lead Acid AGM Solar Battery12V 240ah Deep Cycle Sealed Lead Acid AGM Solar Battery

General Features

Nonspillable
Sealed and Maintenance-free Operation
High Quality and High Reliability
Exceptional Deep Discharge Recovery
Low Self-discharge
Long Service Life
Solid Copper Terminals
Tank-formed Plates
Computer-aided Design and Manufacturing
Typical Applications
Telecommunication equipment
Electronic instruments
Fire alarm
Security devices
UPS power supply
Emergency lighting

Application:

12V 240ah Deep Cycle Sealed Lead Acid AGM Solar Battery

Package:

12V 240ah Deep Cycle Sealed Lead Acid AGM Solar Battery

Shipment:

1. By sea,by air Shipping, other good shipping way also welcomed.
2.we will send products in 20-30 days after the bank receipt.
3.A tracking number and photos of products will send by email after arrange shipped.

Payment:

1.Pay through T/T, western union, PayPal…
2.Price term: FOB Zhuhai port, FOB Shenzhen port, CNF, CIF, CFR, Door to Door.
3.The customer is responsible for any tax or bank charges by their countries.

Orders:

1.Vast experience Drop shipping.
2.Small orders and sample orders are welcomed, if we have stocks.
3.shipping on time.
4.any problem can get in time communication by 24 hours.

Our Factory

12V 240ah Deep Cycle Sealed Lead Acid AGM Solar Battery

Certificate

12V 240ah Deep Cycle Sealed Lead Acid AGM Solar Battery

Advantage:

1. The battery is full of power when it's out of factory, no need to use liquid charge;
2. no memory, no need to discharge battery use, suitable for circuit design;
3. by high partition, adsorption and strong;
4. there is no flowing liquid (poor liquid), does not leak acid and free Upside down,
5. comply with environmental requirements, ease of use,
6. the use of lead-calcium alloys, battery self-discharge is very low,
7. easy storage, less maintenance;
8. using ABS plastic shell and valve technology for safe use.

Notice

1. Don't near the hot source and don't under the sunshine.
2. Don't charge in the sealed container. 
3. Ambient temperature is important factor for the battery operation. When the ambient temperature is too high, Battery plate corrosion will be increased, while absorbing more moisture; When the ambient temperature is too low, the battery will not be full charged. All this will affect the battery life. Therefore we suggest the working ambient temperature is around 25 º C.
4. Battery charge and discharge current usually uses the concept C, the actual value of C is related to the capacity of the battery. For example, a 100AH battery: 1C = 100A. Charging current is around 0.1C; The charging current must not be bigger than 0.3C. Discharge current general requirements in 0.05 ~ 3C range.
5. After the battery is full converted to float charging, the float voltage is around 13.0V. If the charging voltage is too high will cause the battery overcharge, otherwise the battery will not be full charged. Charging voltage is abnormal, it may be caused by the battery configuration error, or it may be caused by controller failure. Do not choose the controller with bad quality.
6. No short circuit. It should be addition charge if you don't use, and single charge per three months, to avoid irreversible sulfating. The battery should be changed when the battery jar broken or the electrolyte omitted, to avoid acid corrosion.
7. Don't store in the space of acid gas.
8. You should be careful and regular check when use the battery. To avoid the battery don't work. You should change the battery if the capacity is not full or has been damage, especially after one year using.
9. Depth of discharge of the battery life is also a important factor for lifetime of battery, the deeper the battery discharge, the fewer the number of cycles, so battery should avoided from deep discharge.
10. Don't put the battery in the fire, or it will explode.
11. Please use cotton cloth to clean, if the battery is broken down and leak electrolyte. Please wash your skin when touch the electrolyte.
12. Don't clean the battery by using the organic solution. (e.g. petrol)