They are designed for rapid milling T-slots into tougher materials where finish is not as
Important. They are used for most metals, even hardened steel and aerospace alloys. A vertical slot must be cut first so that neck and shank may enter cut. Use with standard end mill arbors.
| STC071A-1, T SLOT CUTTER |
|
| | | Pict | | | |
| DIN851/1 | | | | |
| STRAIGHT SHANK | | | | |
| | | | | | |
| | | | |
| Size | Diameter of Cut | Width of Cut | Diameter of Neck | Overall Length | Shank Diameter |
|
| 5 | 11 | 4.5 | 4 | 53.5 | 10 |
| 6 | 12.5 | 6 | 5 | 57 | 10 |
| 8 | 16 | 8 | 7 | 62 | 10 |
| 10 | 18 | 8 | 8 | 70 | 12 |
| 12 | 21 | 9 | 10 | 74 | 12 |
| 14 | 25 | 11 | 12 | 82 | 16 |
| 18 | 32 | 14 | 15 | 90 | 16 |
| 22 | 40 | 18 | 19 | 108 | 25 |
| 28 | 50 | 22 | 25 | 124 | 32 |
| 36 | 60 | 28 | 30 | 139 | 32 |
| | | | | | |
| STC071A-2, T SLOT CUTTER |
|
| | | Pict | | | |
| DIN851/2 | | | | |
| TAPER SHANK | | | | |
| | | | | | |
| Size | Diameter of Cut | Width of Cut | Diameter of Neck | Overall Length | Shank M.T. No |
|
| 10 | 18 | 8 | 8 | 82 | MT1 |
| 12 | 21 | 9 | 10 | 98 | MT2 |
| 14 | 25 | 11 | 12 | 103 | MT2 |
| 18 | 32 | 14 | 15 | 111 | MT2 |
| 22 | 40 | 18 | 19 | 138 | MT3 |
| 28 | 50 | 22 | 25 | 173 | MT4 |
| 36 | 60 | 28 | 30 | 188 | MT4 |
| 42 | 72 | 35 | 36 | 229 | MT5 |
| 48 | 85 | 40 | 42 | 240 | MT5 |
| 54 | 95 | 44 | 44 | 251 | MT5 |
| | | | | | |
| STC071A-3, T SLOT CUTTER |
|
| | | Pict | | | |
| ANSI/ASME B94.19 | | | | |
| STRAIGHT SHANK | | | | |
| | | | | | |
| | | | | | |
| STRAIGHT SHANK | INCH SIZES |
| Size | Diameter of Cut | Width of Cut | Diameter of Neck | Overall Length | Shank Diameter |
|
| 1/4" | 9/16" | 15/64" | 17/64" | 2-19/32" | 1/2" |
| 5/16" | 21/32" | 17/64" | 21/64" | 2-11/16" | 1/2" |
| 3/8" | 25/32" | 21/64" | 13/32" | 3-1/4" | 3/4" |
| 1/2" | 31/32" | 25/64" | 17/32" | 3-7/16" | 3/4" |
| 5/8" | 1-1/4" | 31/64" | 21/32" | 3-15/16" | 1" |
| 3/4" | 1-15/32" | 5/8" | 25/32" | 4-7/16" | 1" |
| 1" | 1-27/32" | 53/64" | 1-1/32" | 4-13/16" | 1-1/4" |
| 1-1/4" | 2-7/32" | 1-3/32" | 1-9/32" | 5-3/8" | 1-1/4" |
| 1-1/2" | 2-21/32" | 1-11/32" | 1-17/32" | 5-29/32" | 1-1/4" |
| | | | | | |
| Specification |
| 1/2x31/32x25/64x17/32x3/4x3-7/16 |
| 5/8x1-1/4x31/64x21/32x1x3-15/16 |
| 3/4x1-15/32x5/8x25/32x1x4-7/16 |
| 1x1-27/32x53/64x1-1/32x1-1/4x4-13/16 |
| 1-1/4x2-7/32x1-3/32x1-9/32x1-1/4x5-3/8 |
| 1-1/2x2-21/32x1-11/32x1-17/32x1-1/4x5-29/32 |