Products

High Quality 2 Zones Climatic Thermal Shock Testing Chamber

China High Quality 2 Zones Climatic Thermal Shock Testing Chamber, Find details about China Thermal Shock Test Chamber, Hot Cold Impact Chamber from High Quality 2 Zones Climatic Thermal Shock Testing Chamber

Model NO.
TST Series
High Temp. Chamber Temp. Range
+60ºC~+200ºC
Low Temp. Chamber Temp. Range
-65ºC~0ºC
Pre-Heating Time
Within 30 Min
Pre-Cooling Time
Within 60 Min
Temperature Uniformity
+/-2ºC
Temp. Deviation
+/-2ºC
Temp. Fluctuation
+/-0.5ºC
Temp. Recovery Time
Within 5 Min
Controller
7-Inch LCD Touch Screen
Compressor
Copeland or German Bitzer
Trademark
KOMEG
Transport Package
Standard Exported Fumigation Wooden Case
Specification
Standard and Customized available
Origin
Dongguan, China
HS Code
9032100000
Model NO.
TST Series
High Temp. Chamber Temp. Range
+60ºC~+200ºC
Low Temp. Chamber Temp. Range
-65ºC~0ºC
Pre-Heating Time
Within 30 Min
Pre-Cooling Time
Within 60 Min
Temperature Uniformity
+/-2ºC
Temp. Deviation
+/-2ºC
Temp. Fluctuation
+/-0.5ºC
Temp. Recovery Time
Within 5 Min
Controller
7-Inch LCD Touch Screen
Compressor
Copeland or German Bitzer
Trademark
KOMEG
Transport Package
Standard Exported Fumigation Wooden Case
Specification
Standard and Customized available
Origin
Dongguan, China
HS Code
9032100000
High Quality 2 Zones Climatic Thermal Shock Testing Chamber

I.Product Overview

Thermal Shock Testing Chamber is an effective tool in subjecting products to a thermal shock test. Thermal Shock Chambers are equipped with 2 distinct cabinets - one hot and one cold- and with a mobile basket  that automatically transports a product under test between separately controlled temperature zones. With built-in viewing windows, users can easily observe the product as it's transferred between different temperature zones.


II. Application

It is  applicable for electronics, electrical appliance, mobile phones, communication,meters,vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace and other products quality inspection.     
High Quality 2 Zones Climatic Thermal Shock Testing Chamber
               
III. Standard Compliance

•GB-2423.1-2008(IEC68-2-1) Test A: Low Temperature Test

•GB-2423.2-2008(IEC68-2-2) Test B: High Temperature Test

•GJBl50.3-2009(MIL-STD-810D) High Temperature Test

•GJBl50.4-2009(MIL-STD-810D) Low Temperature Test

•GJBl50.5-2009 Temperature shock test method


IV. Main Technical Parameters
 
ModelTST Series(2-Zone)
64A/B/D70A/B/D100A/B/D150A/B/D300A/B/D500A/B/D
Volume(L)64L70L100L150L300L500L
Basket sizeW(mm)400500500670850900
H(mm)400350400460550700
D(mm)400400500490640800
Exterior sizeW(mm)8601500950152019402025
H(mm)201019702040194022602685
D(mm)220019002030253027352740
Test weight(KG)3.54571520
High Temp.Chamber +60ºC~+200ºC
Pre-heating timefrom normal temperature RT ~ +200ºC, Within 30 min
Low Temp.Chamber(A)0ºC~ -40ºC         (B)0ºC~ -55ºC         (D)0ºC~-65ºC
Pre-cooling timefrom normal temperature RT ~ -70° C Within 60 min
Temp.Shock Range(A) -40ºC~+150ºC         (B) -55ºC~+150ºC          (D)-65ºC~+150ºC 
Temperature uniformity<=±2.0ºC 
Temperature fluctuation<=±0.5ºC 
Temperature deviation±2.0ºC
Transfer time<=10s
Recovery time<=5min
Noise<=75dB
Interior materialStainless steel plate(SUS 304)
Exterior materialBaked painting steel or stainless steel(SUS304)
Insulation materialRigid polyurethane Foam + glass fiber wool
Refrigeration systemWater Cooled
Semi-hermetic compressor, cascade refrigeration system,Eco-friendly refrigerant
ControllerPanel:7-inch LCD Touch screen, Chinese / English display for option
Operation model: Program or fix point running
Memory capacity:120programs,1200steps, all repeat 999cycles,
part repeat 99 cycles.
Accuracy:Temp.:0.1% of F.S±1 digit     Humidity:0.1% of F.S±1 digit
Input:Temp.:pt-100                Humidity:pt-100 or ~5V DCV
Ambient Temp.1.Ambient temperature: 5ºC-35ºC
2.Relative humidity: <=85%R.H
3.Atmospheric pressure:80kPa~106kPa
4.Flat, vibration-free ground;
Safety deviceNFB(No fuse breaker), over pressure, over heat and over current protection for compressor, over temperature protection,  over load protection for blower, dry heat protection
Standard accessoryCable port(portΦ50mm)*1,   shelves*2
PowerAC 380±10% 50Hz ,3 phase 4 wires +Ground Wires
Note:
1. We reserve the right to change specifications without prior notice  
2. Customized sizes and configurations available


V. Product Details
High Quality 2 Zones Climatic Thermal Shock Testing Chamber
High Quality 2 Zones Climatic Thermal Shock Testing Chamber
High Quality 2 Zones Climatic Thermal Shock Testing Chamber
High Quality 2 Zones Climatic Thermal Shock Testing Chamber
High Quality 2 Zones Climatic Thermal Shock Testing Chamber
High Quality 2 Zones Climatic Thermal Shock Testing Chamber
High Quality 2 Zones Climatic Thermal Shock Testing Chamber

VI. Our Company

High Quality 2 Zones Climatic Thermal Shock Testing Chamber


VII. Our Service
Pre-sale Service:

Provide test solution
Send specification and quotation

In-sale Service:

Design
Production
Calibration
Installation
Training
Preventative maintenance

After-sale Service:

24-hour Online contact
Free software upgrades
Replacement parts
Assistance via phone or internet
On-site diagnosis and repair/online diagnosis and repair
High Quality 2 Zones Climatic Thermal Shock Testing Chamber


VIII.Packing&Shipping
High Quality 2 Zones Climatic Thermal Shock Testing Chamber

IX.FAQ

Q:Are your company a trading one or a factory?
A:Factory + trade (integration).More than 30 years focusing on environmental test instruments field.

Q:Which certifications do you have ?
A:We have passed the CE certification,the ISO certification ,China high-tech enterprise certificate,etc.

Q:How to choose the most suitable products?
A:Our professional team will give you the best suggestion, when you need some products to make the test, just be patient to tell us the information about your test sample, the parameters you required. Our team may help you find the best one.

Q:Does your product can be customized with my requirement?
A:Yes, of course. We have independent R&D capability with structure engineer, electrical system engineer and cooling system engineer, which enable us to keep flexibility on customer's requirements, including product size, temperature range, product color, etc.

Q:After an order is placed, when to deliver?
A:Generally about 25-30 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our 
production lead time depends on specific items and item quantities. 

Q:How is the product delivered?
A:Usually, sea transportation is our first suggestion for customers because its cost is less. But if customers need to ship the product by air or by rail, we can also help them.

Q:What about the  product' services and quality?
A:Each instrument must be carried out 100% quality examination and test when shipping and delivering goods. We provide a very specific operation manual. Usually, we will take a video to show how to operate as well. If customers need, we can also arrange for abroad onsite installation and training.

Q:What about the warranty with after - sale services?
A:We provide free parts replacement service for accessories with one year. We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sale service.
 

You Might Also Like