Factory Direct Supply DMC/Dimethyl Carbonate

 

Dimethyl carbonate (DMC) is an organic compound with the formula OC(OCH₃)₂. It is a colourless, flammable liquid. It is classified as a carbonate ester. This compound has found use as a methylating agent and more recently as a solvent that is exempt from the restrictions placed on most volatile organic compounds (VOCs) in the US.Dimethyl carbonate is often considered to be a green reagent.
 

Production of dimethyl carbonate worldwide is limited to Asia, the Middle East, and Europe.Dimethyl carbonate is traditionally prepared by the reaction of phosgene and methanol.

DMC is a flammable liquid with a flash point of 17 °C (63 °F), which limits its use in consumer and indoor applications. DMC is still safer than acetone, methyl acetate and methyl ethyl ketone from a flammability point of view. DMC has a recommended exposure limit (REL) limit of 100 ppm by inhalation over an 8-hour work day, which is similar to that of a number of common industrial solvents (toluene, methyl ethyl ketone). Workers should wear protective organic vapor respirators when using DMC indoors or in other conditions where concentrations exceed the REL. DMC is metabolized by the body to methanol and carbon dioxide, so accidental ingestion should be treated in the same manner as methanol poisoning.

Methylating agent

Dimethyl carbonate methylates anilines, carboxylic acids, and phenols Sometimes these reactions require the use of an autoclave.

Solvent

Dimethyl carbonate has an ester- or alcohol-like odor, which is more favorable to users than most hydrocarbon solvents it replaces. Dimethyl carbonate has an evaporation rate of 3.22 (butyl acetate = 1.0), which slightly slower than MEK (3.8) and ethyl acetate (4.1), and faster than toluene (2.0) and isopropanol (1.7). Dimethyl carbonate has solubility profile similar to common glycol ethers, meaning dimethyl carbonate can dissolve most common coating resins except perhaps rubber based resins. 

Intermediate in polycarbonate synthesis

A large captive use of dimethyl carbonate is for the production of diphenyl carbonate through transesterification with phenol. Diphenyl carbonate is a widely used raw material for the synthesis of bisphenol-A-polycarbonate in a melt polycondensation process. The most common route is described by Fukuoka, of the Japanese "Asahi Kasei" chemical corporation.

Alternative fuel additive

There is also interest in using this compound as a fuel oxygenate additive.

Shandong Near Chemical Co.,Ltd is located in the beautiful Yellow River Delta, the mouth of the Yellow River into the sea-Dongying City. With a registered capital of 30 million yuan, it was founded in 2011 and has grown rapidly with total assets 180 million yuan and 100 employees. Near Chemical is a comprehensive service company focusing on import & export of chemicals and domestic trade. We are integrating rich chemical resources along with individual customized services for all global clients.

Our company adheres to the market-oriented, committing to exploring the diversified international market, as well as the principle of honesty and trustworthiness. The clients of Near Chemical always come first.
In the past decade, Near Chemical has established a stable and friendly partnership with thousands of customers over 60 countries and regions. We have spread wide range of chemicals in various fields such as pharmacy, petroleum, animal husbandry, food processing, printing&dyeing, manufacturing industries etc. Near Chemical now has warehousing, trading, public utilities ,property management and other comprehensive entities, and gradually develop to collectivization, internationalization and Industrialization. Our company has a good development prospect and unlimited potential future.
Our main production lines are including Methylene Chloride 30,000 tons/year, Maleic Anhydride 30,000 tons/year, Propylene Glycol 20,000 tons/year.  

Meanwhile, we specialized in offering the following chemicals: Aniline,Dimethyl Formamide,Isopropanol ,Toluene diisocyanate,Polyether Polyol,Polymer Polyol, Methyl Acetate, Ethyl Acetate, Butyl Acetate, Glacial Acetic Acid, Potassium Hydroxide, Nitrile Butadiene Rubber Latex, Caustic Soda, Dipropylene Glycol, Ethylene Glycol, Phenol, Phthalic Anhydride, Cyclohexanone, Thiourea, Barium Carbonate, Aluminum Chloride, Calcium Nitrate, N-propanol, Methyl Ethyl Ketone, Methanol, Ethanol, Cyclohexane, Dimethyl Carbonate,  Dichlorodifluoromethane, Dichlorofluoromethane, Trichloroethylene, Tetrachloroethylene, Epichlorohydrin, Sodium Hydroxide Liquid, etc.
We always carry out "quality first and service the best". 

Near Chemical, Near U, Warm the world.

 

10 Years Experiences
Our products have been promoted to all over Europe,North&South America, Middle-east, Asia and pacific area as well as Africa,we have established long term cooperation with our clients.

Quality service
Adhering to the principle of "quality first,service the best" Near Chem insists on providing high quality chemicals based on a complete Quality Assurance System. Meanwhile,we use SOP system to guarantee our whole logistics.  Near Chem has built a mutual trust under honesty and integrity principles with customers all around the world.And will keep promoting our commitment to better a nearer Chem to the world.  
 
24 hour service
24 hours quick and clear respond to our customers all around the world. Professional and individual after sales service to assure the Customer satisfaction.

 

1 Q:Are you manufacturer?
A: As an integrated enterprise, we have our own production lines on Methylene Chloride, Chloroform and Aniline oil, meanwhile we are one of the experienced distributors for other chemicals such as cyclohexanone, Dimethyl Formamide, Propylene Glycol, Ethylene Glycol, Dimethyl Carbonate, Thiourea, Polyol, TDI, IPA, Ethanol etc. We have competitive price benefited by ready stock and good relations with some leading chemical manufacturers.

2 Q: How can you guarantee your quality?
A: Our factory owns mature production line under EPR quality system. We can guarantee the stability and qualification of the raw materials. And we also have SOP loading system to ensure the safety and timely transportation.

3 Q: Can I get some samples?
  A:  Yes, we welcome sample order for you to test and check our quality. Send me your requirements of the product you need. We can provide sample free of charge, and the express cost is on you.

4 Q: How to confirm the Product Quality before placing orders?
  A :  You can get free samples from us or taking our previous SGS Reports as reference or arrange SGS before loading.

5 Q: What is your MOQ?
A: Our MOQ is 20'FCL for each product.

6 Q: What kind of package do you have?
A: We have various of packages to meet needs of our customers,like Iron drums,plastic drums, IBC tanks, Flexitank, ISO TANK and bags etc.

7 Q :Which kind of payment terms do you accept?
A:We prefer TT, LC payment terms. Other payment terms are flexible to be further discussed.

8 Q:Can you give me a discount price?
A: Yes. It depends on your order qty.

9 Q: How about your delivery? How long is your delivery time?
A: Prompt and reliable delivery by professional shipping lines.
Generally it takes 14 days after deposit or original LC.


 

MAIN PRODUCT LIST