Products

Corrugated Cardboard Single Facer Flute Cardboard Single Facer

China Corrugated Cardboard Single Facer Flute Cardboard Single Facer, Find details about China Corrugated Cardboard Single Facer, Corrugated Paperboard Singe Facer from Corrugated Cardboard Single Facer Flute Cardboard Single Facer

Model NO.
SCSF
Trademark
SHICHENG
Origin
China
HS Code
8439300000
Model NO.
SCSF
Trademark
SHICHENG
Origin
China
HS Code
8439300000
VACCUM Single Facer
Corrugated Cardboard Single Facer Flute Cardboard Single FacerSingle facer is design for producing single-face corrugated paper, the medium process into wave-paper, and past glue on the top of flutes, stick with liner become into single-face corrugated paper.
(Paper standard: A grade paper, face paper 140~175g/square meter,flute paper:110~125g/square meter)

Specification:
Working width: Max:1400mm,1600mm,1800mm,2000mm.
Design speed: 150m/min, normal work speed: 120m/min
Driving part: frequency 40HP*4P/1.8M
Adsorption motor: 15HP/1.8M
Steam pressure: 10~14kg
Flute type: UV type, corrugating roller diameter Ø320MM. One pair.
Corrugating roller raw materials: 48CrMo alloy steel, made in Shanghai.
Flute: A, C, B or E could required by buyer.
Pressuring roller: Ø328MM one pcs, made in special hard steel, surface do grinding and chromed.
Gluing roller: Ø250MM, one pcs, surface do grinding, embossing and chromed.
Doctor roller: Ø140MM, one pcs, surface do grinding, chromed and do polishing.
Structure drawing
1. Upper corrugating roller lift-down controller by two hydraulic cylinder.
2. Cylinder specification: Ø140*ST(45+45), with magnetic valve button & hydraulic station control pressure roller
3. Gluing group: Advance and retreat of the glue roller house is control by two pneumatic cylinders.
Cylinder specification: Ø100*ST30, with magnetic valve button control
4. Adjust glue thickness: Quantity of pasting glue and control glue is control by the clearance between glue roller and doctor roller adjustment and the inter-face appear control, figure show gluing details.
Motor specification: GH1/8HP*4P*1/4680, gear reducer motor made in Taiwan
5. Adjust advance and retreat of glue roller and pressure roller clearance: The electric motor drive cam micro-adjust, and display the adjusting quantity on inter-face by the motor.
Motor specification: GH1/8HP*4P*1/4680, made in Taiwan.
6. Adjust pressure roller clearance: The electric motor drive cam micro-adjust, and display the adjusting quantity on inter-face by the displacement sensor.
Motor specification: GH1/8HP*4P*1/4680, made in Taiwan.
7. Main drive part: Main drive with the separate gear box to shift drive, gear is made from high quality alloy steel and the dip oil type, low noise, long life.
8. Driving part details: The gear box transfer the kinetic energy to the three rollers (upper, down corrugated roller and pressure roller) through the universal transmission shaft. The structure ensures the stable performance, easy and fast to maintenance.
10. Add three steam turning tie-ins, steam tube and one backwater equipment.
11. The iron blank on top of machine can separate disconnect to clean garbage inside, not need disconnect whole machine.
12.  The axis of upper, down corrugated roller and pressure roller adopt the resistant high temperature oil to lubricate, the axis type: NU224 and adjustment axis NJ224, there are high-precision axis imported from Japan NSK.
 

You Might Also Like