2000n Electric Linear Motor Linear Actuator Hydralic Cylinder Actuator
China 2000n Electric Linear Motor Linear Actuator Hydralic Cylinder Actuator, Find details about China Industrial Linear Actuator, Linear Actuator from 2000n Electric Linear Motor Linear Actuator Hydralic Cylinder Actuator
Basic Info.
Model NO.
DTI 2000-700
Motor
Asynchronous Motor
Trademark
X-ing
Transport Package
Wooden Case
Specification
200*96*105 (cm)
Origin
China
HS Code
8
Model NO.
DTI 2000-700
Motor
Asynchronous Motor
Trademark
X-ing
Transport Package
Wooden Case
Specification
200*96*105 (cm)
Origin
China
HS Code
8
Product Desciption
Technical parameters:
Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments.
Technical specifciation:
Packing:
OUR WORKSHOP
OUR SALES TEAM
FAQ:
Q:Are you trading company or manufacture ?
A:We are real manufacture
Q:How long is your delivery time?
A:Generally it is 20-30days if the goods are in stock. or it is 30-40days if the goods are not in stock,it is
according to order quantity.
Q:What is your payment term?
A:Payment <=2000USD,100% in advance. Payment >=2000USD,30%T/T in advance,balance before shippment.
or By Irrevocable L/C at sight.
Q:Do you provide samples? is it free or extra?
A:Yes,we could offer the sample with cost price or free charge, but do not pay the cost of freight.
If you have another question,pls feel free to contact us as below:
X-ING linear actuator co.,limited.
Commercial Manager: Jennifer Yang
x-ingconveyor.en.made-in-china.com
Due to the special nature of the product, the online price is
a regular offer, pls send your detail technical request, we will
offer you according to your actual needs.
| model | thrust | speed | push distance | motor model |
| DTI 2000-700 | 2000 | 84 | 700 | JW5612 |
Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments.
Technical specifciation:
| NO. | Type | Trust (kg) | Route (mm) | Speed (mm/s) | Motor | 380(V) | Le(mm) | contour dimension (L*W*H)mm | weight (kg) | |||
| Type | Power (w) | Revolution (T/Min) | Electricity (A) | LeMin | LeMax | |||||||
| 1 | 25-20-I | 25 | 200 | 48 | AO25024 | 40 | 1400 | 0.23 | 369 | 569 | 580*125*118 | 7.5 |
| 2 | 25-20-II | 25 | 200 | 96 | AO25022 | 60 | 2800 | 0.23 | 369 | 569 | 580*125*118 | 7.5 |
| 3 | 100-40-I | 100 | 400 | 42 | AO5624 | 120 | 1400 | 0.47 | 640 | 1040 | 858*152*206 | 23 |
| 4 | 100-40-II | 100 | 400 | 84 | AO5622 | 180 | 2800 | 0.52 | 640 | 1040 | 858*152*206 | 23 |
| 5 | 300-50-I | 300 | 500 | 42 | AO6334 | 370 | 1400 | 1.12 | 745 | 1245 | 998*170*226 | 35 |
| 6 | 300-50-II | 300 | 500 | 84 | AO6332 | 550 | 2800 | 1.38 | 745 | 1245 | 998*170*226 | 35 |
| 7 | 500-50-I | 500 | 500 | 50 | AO7134 | 750 | 1400 | 2.02 | 778 | 1278 | 1098*190*226.5 | 52 |
| 8 | 500-50-II | 500 | 500 | 100 | AO7132 | 1100 | 2800 | 2.6 | 778 | 1278 | 1098*190*226.5 | 52 |
| 9 | 700-60-I | 700 | 600 | 50 | AO7134 | 750 | 1400 | 2.02 | 803 | 1343 | 1193*200*279 | 63 |
| 10 | 700-60-II | 700 | 600 | 100 | AO7132 | 1100 | 2800 | 2.6 | 803 | 1343 | 1193*200*279 | 63 |
| 11 | 1000-60-I | 1000 | 600 | 50 | JO2-21-4 | 1100 | 1400 | 2.68 | 883 | 1483 | 1260*204*271 | 75 |
| 12 | 1000-60-II | 1000 | 600 | 100 | JO2-21-2 | 1500 | 2860 | 3.24 | 883 | 1483 | 1260*204*271 | 75 |
| 13 | 1600-80-I | 1600 | 800 | 50 | JO2-31-4 | 2200 | 1400 | 4.9 | 1063 | 1863 | 1535*302*330 | |
| 14 | 1600-80-II | 1600 | 800 | 100 | JO2-31-2 | 3000 | 2860 | 8.06 | 1063 | 1863 | 1535*302*330 | |
1, Base 2, Coupling 3, Pump base 4, Pump 5, Fuel tank 6, Manifold block 7, Inspection mouth 8, Air filter 9,
Cylinder base 10, Throttle valve 11, Locking circle nut 12 Cold 13 live cold ring 14, cylinder body 15, guide
sleeve 16, cylinder head nut 17, dust cover 18, tighten the nut 19, connecting fork
Packing:
OUR WORKSHOP
OUR SALES TEAM
FAQ:
Q:Are you trading company or manufacture ?
A:We are real manufacture
Q:How long is your delivery time?
A:Generally it is 20-30days if the goods are in stock. or it is 30-40days if the goods are not in stock,it is
according to order quantity.
Q:What is your payment term?
A:Payment <=2000USD,100% in advance. Payment >=2000USD,30%T/T in advance,balance before shippment.
or By Irrevocable L/C at sight.
Q:Do you provide samples? is it free or extra?
A:Yes,we could offer the sample with cost price or free charge, but do not pay the cost of freight.
If you have another question,pls feel free to contact us as below:
X-ING linear actuator co.,limited.
Commercial Manager: Jennifer Yang
x-ingconveyor.en.made-in-china.com
Due to the special nature of the product, the online price is
a regular offer, pls send your detail technical request, we will
offer you according to your actual needs.
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine