Sb111 C44300 Heat Exchanger Copper Finned Tubes

China Sb111 C44300 Heat Exchanger Copper Finned Tubes, Find details about China Copper Finned Pipe, Grooved Copper Pipe from Sb111 C44300 Heat Exchanger Copper Finned Tubes

Basic Info.

Grade

TP2

State

Hard

Customized

Color

Red

Trademark

MAXCOOL

Transport Package

Seaworthy

Specification

Customized

Origin

China

HS Code

7411

Grade

TP2

State

Hard

Customized

Color

Red

Trademark

MAXCOOL

Transport Package

Seaworthy

Specification

Customized

Origin

China

HS Code

7411

Product Desciption

Product Description

Specification of finned tube

Economy and Energy Saving
The high-fin tube is used to advantage when gases are to be heated or cooled or when a process stream is to be air-cooled. High-fin tubes come in a wide variety of fin heights, thickness, and spacings, giving values of Ao/Ai up to 25. For corrosion protection, a mechanically bonded liner tube may be used inside the finned tube. The liner can be made of corrosion-resistant alloy, while the outer tube and fins are made of a high conductivity metal such as copper or aluminum to improve heat transfer.
One major application of high-finned tubes is in air-cooled heat exchangers. Atmospheric air, like all low pressure gases, gives a very low heat transfer coefficient at normal velocities. By contrast, the tube-side fluid, usually a liquid to be sensibly cooled or a vapor to be condensed may have a coefficient up to 100 times higher, or even more. Therefore, high-finned tubes are used in these exchangers to reduce to overall size of exchanger required.

Name	Finned Tube
Brand	MAXCOOL
Standard	ASME SA213/ASTM A213,ASME SA106/ASTM A106,ASME SA179/ASTM A179,ASTM B111
Base Tube Material	stainless steel, carbon steel, copper alloy,alloy steel (No theoretical limit)
Fin Material	Aluminium,Copper Alloy,Stainless Steel,Carbon Steel
Fin Tube Type	1.Extruded fins tube
	2.Serrated fin tubes
	3.L Type fins tube
	4.G Type fins tube
	5.LL Type fins tube
	6.H Type fins tube
	7.KL Type fins tube
Base Tube O.D	20~190mm
Fin Depth	0.5~4mm
Fins per inch	As customer's request
No fin area on both side	As Customer's request.
Design Temperature	Below 450°C
Product processing	Extruded,Embedded,High Frequency Welding etc.
Ends	PE/Plain Ends, BE/Beveled Ends
Test Requirement	Physical Property Test,Chemical Composition Analysis,Non-Destructive Test,Other Inspection and test as customer's requirement.
Application	Air Cooler,Charge Air Chiller, Condenser,Evaporator, Fluid Cooler, Gas Cooler,Oil Cooler, Radiator, Refrigeration,Steam to Air Heat Exchanger,superheater etc.
Certificate	ISO9001:2008,PED/97/23/EC
Package	Wooden cai with steel frame.
Product Origin	China(mainland).
Payment Terms	T/T,
Nearest Port	CHINA