Manufacturing Precision Standards : Japanese JIS 1 Class
1. Parameters
1) 400ton -- 600ton Parameters
| Name | Unit | STD-400 | STD-500 | STD-600 |
|
| Model | S | H | S | H | S | H |
| Capacity | Ton | 400 | 500 | 600 |
| Rated tonnage point | mm | 13 | 7 | 13 | 7 | 13 | 9 |
| Stroke | mm | 400 | 300 | 400 | 300 | 400 | 300 |
| Speed changing | s.p.m | 15-25 | 35-40 | 15-25 | 25-40 | 15-25 | 20-30 |
| Die height | mm | 600 | 650 | 650 | 700 | 650 | 700 |
| Slide adjustment | mm | 150 | 200 | 200 |
| Slide area | mm | 2800x1300 | 3100x1400 | 3600x1400 |
| Bolster area | mm | 2800x1400 | 3100x1500 | 3600x1500 |
| Side opening | mm | 850x600 | 950x650 | 1000x700 |
| Die cushion capacity | Ton | 60 | 70 | 80 |
2) 800ton -- 1200ton Parameters
| Name | Unit | STD-800 | STD-1000 | STD-1200 |
|
| Model | S | H | S | H | S | H |
| Capacity | Ton | 800 | 1000 | 1200 |
| Rated tonnage point | mm | 13 | 9 | 13 | 9 | 13 | 9 |
| Stroke | mm | 400 | 300 | 400 | 300 | 400 | 300 |
| Speed changing | s.p.m | 15-25 | 20-30 | 15-25 | 20-30 | 15-25 | 20-30 |
| Die height | mm | 700 | 750 | 1000 | 1050 | 1000 | 1050 |
| Slide adjustment | mm | 250 | 250 | 250 |
| Slide area | mm | 3800x1600 | 4600x1800 | 5000x1800 |
| Bolster area | mm | 3800x1600 | 4600x1800 | 5000x1800 |
| Side opening | mm | 1100x800 | 1200x900 | 1200x900 |
| Die cushion capacity | Ton | 80 | 80 | 80 |
2. Technical Descriptions :
Features:
1) Slider with Octahedral longer guide rails to guarantee operation precision.
2) Hydraulic overload protection device stop the operation emergency when overload ,convenient for application;
3) PLC electric interlocking control , with functions of Emergency stop, inch, single-stroke, and continuous operation;
4) Dry pneumatic friction clutch is small in noise, large in clutching torque, small in braking angle, and convenient for maintenance;
5) Body is closed structure, including beams, stand columns, and bases, pre-tighten by four tie bolts, with good rigidity .
Standard Configuration:
> Hydraulic overload protector
> Electric slider adjusting device
> Independent electrical control cabinet
> Movable Operating Platform
> Digital mould-height indicator
> Circulation centralization lubrication oil feeding device
> Power socket
> Over-run safety device
> Misfeed detection device
> Pre-determined counter (6 digits)
> Air-blast device 1/2" primary circuit
> Air source connector 1/2" secondary circuit
> Frequency converter
Optional Configuration:
> Die Cushion device
> Photo-electric safety device
> Knock out device on the slider
> Safety block and safety latch
> Anti-vibration device
> Die area lighting
> Quick die change device
> Movable working table
> Automatic feeding system