China Air Disc Truck Stamping Parts Brake Pad Set with Casted Back Plate, Find details about China Brake Pad Back Plate, Brake Pad Pad from Air Disc Truck Stamping Parts Brake Pad Set with Casted Back Plate
Product Name | Back Plate of Disc Brake Pad |
Package | Netural Package |
Payment | L/C T/T |
Overview of the operation panel
The processing thickness of the charfing width of the grinding machine are displayed by the raster display device. X shows the roughing thickness. Y shows the finishing thickness. Z shows the width of chamfering. They are reference values.
The main reference columns of raster display are as follows:
1. Panel diagram;
2. Panel instructions.
3.2.1. Resolution, the resolution of this machine is 0.005mm.
3.2.3. Counting direction.
4.1. Clear.
4.2. Enter preset values for an axis.
4.3 Metric-British conversion.
How to use the grinding machine
1. You should first check whether each system is normal, including running direction and chain tightness, distance gap, clutch tightness, and data display etc. Make sure to discover problems in advance,to deal with them in advance so as to ensure safe production.
2. Adjust the width of the slide rail according to the distance between the steel back and the stabilizing nail. Based on the largest contact surface between the steel back and the slide rail and the widest slide rail, the magnetic area of the contact slide rail is maximized and the slide rail is widest. The gap between the steel back stabilizing nail and the slide rail shall be 2-5mm.
3. Adjust the width and height of the splint. Adjust the splint according to the width of the friction material of the product, the width of the splint should be 1-2mm greater than the width of the material . Properly adjust the height of the splint according to the thickness of the steel back, so as not to cause stuck operation.
4. Adjust the height and center position of the saw blade. The edge of the saw blade should be higher than the push plate. The saw blade should be located in the center of the splint and slide rail, and it can also be adjusted appropriately according to the previous position.
5. Adjust the processing height of the grinding disc. First of all, unlock the brake of the grinding disc, adjust the value first to avoid adversely affecting the product. If the actual brake thickness is inconsistent with the displayed data, adjust the displayed value. Press the x or y button according to the corresponding x or y display button. At this time, no value is displayed, re-enter the actual value of the experimental product, and then press the Ent button. Unlock the air brake system every time you adjust it, and re-lock the air brake system when you have adjusted it. The method for adjusting the grinding disc is the same as above.
6. Adjust the chamfer value according to the width of the friction material of the product. This value is a reference value and should be adjusted appropriately according to the requirements of the product.
7. Adjustment of running speed. According to the requirements of the product and the speed of the workers, the running speed can be adjusted appropriately.
8. When the product finally comes off the slide rail, be sure to pay attention to safe operation and do not snatch the product under dangerous circumstances.
9. If the receiving skateboard is stuck, reduce the height of the skateboard when towing.
10. If there is product abnormality during operation, you can manually adjust the forward-reverse buttons to reverse. Reversing can't run for a long time. The maximum processing speed is 2100 pieces per hour.
1. What is your minimum order quantity and warranty?
A: MOQ is one set, and warranty is one year.
2.When is the delivery time?
A: Conventional Machines,We will delivery then within 30-45 working days after received your deposit,if some special machines will
be some longer.we will give you the answer accordingly.
3. What is the package of the machines?
A: The machines standard packed by iron pallets with plastic films.
4.How can I choose the most suitable machines ?
A: Please let us know your machining demand or machine size ,we can choose the best model for you , or you can choose the exact model by yourself. You can also send us the products drawing ,we will choose the most suitable machines for you .