China Safety Lanyard, Safety Belt Lanyard with Hooks, Find details about China Safety Lanyard, Lanyard from Safety Lanyard, Safety Belt Lanyard with Hooks
Rope lanyard material : 100% polyester |
Breaking strength: 30KN |
Rope diameter: 14mm |
Length: 1.5-1.8m |
With 1 small steel carabiner and 1 middle stamping snap hook |
Meet EN354 |
Application
Safety lanyards are a worker's vital link to their fall protection anchor point. Lanyards are typically short sectionsof webbing or cable that are usually attached to the D -ring of a workers safety harness. Lanyards can have a shock absorbing feature or simply be a short connection that connects to a lifeline or fall protection anchor point .
The energy absorbing lanyards allow to absorb the energy of fall by tearing of specific webbings or sewings.
Usage Instruction
1.Connect one of the lanyard snap hooks to the selected attaching buckle of the work positioning belt.
2.Put the lanyard around the construction element.
3.Connect second snap hook to the another buckle of work positioning belt. Adjust lanyard length with regulating buckle. The tension of the lanyard should assure a stable work position and restrict the free fall of the worker. The distance of the free fall should not exceed 0.5m.
Attention and Warning
1. Safety lanyard should be used along with full body safety harness.
2. The maximum length of safety lanyard including attached energy absorber would be 1.8 -2 meters. The energy absorber can increase the deceleration distance 1.38 meters. Before using, please make sure that fall space permits using an energy absorber. Linked to point must be higher 6 meters than ground.
3.The energy absorber with lanyard must only be connected to front or back attaching point of full body harness.
1) It is strictly FORBIDDEN to connect the energy absorber with lanyard to the work positioning belt.
2) It is strictly FORBIDDEN to additional element between the energy absorber with lanyard and the structural ancher point.
4.Admissible time of use:
The safety lanyard with or without energy absorber can be used for 5 years, counting from the date of putting the device into operation. After 5 years of usage it must be withdrawn from use and destroyed. The energy absorber must be withdrawn from use immediately and destroyed when it have been used to arrest a fall.
Since 2001, we have been specializing in the field of Lashing Equipment and Lifting Equipment. Our main products are Cargo Lashings, Webbing Slings and Round Slings, etc.
In the meantime, we timely develop new products in relevant field to meet market demands, such as Cargo Nets, Edge Protectors and Safety Harness, etc. All products are produced under strict standard of quality control, and constant research and development ensuring that you will get the latest products produced with the most advanced and cost effective technologies.
Most of our products are CE and GS certified. We are confident that our products and service will satisfy the highest standards of requirements.
Order procedure
Step 1 | Please send us inquiry by email .We need to know the size,quantity and others for webbing Sling , cargo lashing or other you required. |
Step 2 | Discuss all details with you and make the sample if needed. |
Step 3 | Start the mass production after getting your payment(deposit). |
Step 4 | Send goods to you. |
Step 5 | Receive the goods in your side. |
Payment Terms
Payment ways |
T/T |
L/C at sight |
Paypal |
Western Union |
Contact me
I am Ivy. I am waiting to offer my best service to you.
You inquiry and questions are all welcomed. Pls free feel to contact me.