Quarry Stone Cutting Machine

The unique features and advantages are:

 -- Four-wheel drive power;

 -- No need triangle belt, change the traditional belt elastic problem;

 --Faster, more energy saving, more stable, more safe;

-- Small gap, Wear less, Vibration-free;

-- Greatly prelong the use life of the blades;

--To protect environment, save mining cost, increase output and recover;

-- The cylinder guide rail adopt fully enclosed protection to ensure the guide rail not to be contaminated, combinating with the unique lubrication systerm to greatly improve the use life of the machine and mining efficiency, and greatly deduct the maintenance and repair cost.

The 2QYK  series mining quarrying machine cutting width, depth can be customize according to customer requirements. Such as the diameter of blades can do  φ3000, φ3300, φ3500, φ4000/φ4200, φ5000 

Hualong Brand's quarry machine is the oldest brand in China more than 20 years.  We are the leading force in the development of stone mining machinery and equipment. Products of research and development has changed the traditional extensive mining methods of mining stone, improved the utilization of natural resources of stone, reduced the pollution of the environment and the labor intensity of workers. 
With so many years' development and improvment, Hualong quarry machine is well known both domestic and abroad becasue of its steady quality and after sell service.
 

Why choose Hualong stone mining machine?

Detailed Images
 

Electric Control Cabinet

Brand: Siemens, Schneider, Sanch...
Origin: China


Branded electric components used for stable performance.

 

Main motor

Name: Three-phase asymchronous motor
Brand: XDDJ
Efficiency: 93.1%
Original: China 

Domestic famous engines, strong driving force, good efficiency, high economic benefits.
 

 

Hoist System

Adopts four strong steel cylinders as guide rail and hydraulic power for mian spindle's up and down. So small gap ,less wear and no vibration.
The cylinder guide rails are fully enclosed and protected, equipped with automatic lubrication system, which has the advantages of simple maintenance, low cost and long life, and greatly improves the mining efficiency.
 

Railway Switch System

1) Four hydrocylinders jack the machine.
2) Put two rails cross on the working rails and aim at the cross wheels of the machine.
3) Come down the machine on the cross rail, go to the side/next working rail.

 

Advantage of Blade with Cut hole design 

1) Reduce dead weight, reduce load, reduce power loss by about 30%.
2) Both convenient with cooling water into the joint, enhance the cooling effect of the saw blade deformation, and better will be
the joint sand discharge, but also can release the stress generated in the use, more resistant to deformation, longer life