Products

3G&Lte Quad Band Fiber Optic Booster Signal Amplifier

China 3G&Lte Quad Band Fiber Optic Booster Signal Amplifier, Find details about China Repeater, Fiber Optic Repeater from 3G&Lte Quad Band Fiber Optic Booster Signal Amplifier

Model NO.
BT-MC00A/BT-MB43A
Trademark
BOOSTEL
Transport Package
Wooden Case
Specification
1080*560*380
Origin
China
Model NO.
BT-MC00A/BT-MB43A
Trademark
BOOSTEL
Transport Package
Wooden Case
Specification
1080*560*380
Origin
China
Specifications of 3G&LTE Quad Band Fiber Optic Repeater
Model: BT-MC00A/BT-MB43A
 
 The Fiber Optic Repeater (FOR) is designed to solve problems of weak mobile signal in the place that is far away from the Base Transceiver Station (BTS) and has fiber optic cable network underground.
The system consists of two parts: Donor Unit and Remote Unit. The Donor unit captures the BTS signal via direct coupler closed to BTS, then converts it into optic signal and transmits the amplified signal to the Remote Unit via fiber optic cable. The Remote unit will reconvert the optic signal into RF signal and provide the signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
3G&Lte Quad Band Fiber Optic Booster Signal Amplifier

3G&Lte Quad Band Fiber Optic Booster Signal Amplifier
 

Features


Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corroding
Omni-directional antenna can be adopted to expand more coverage
Tx/Rx control and alarm messages can be transmitted via one fiber optic cable
Adopting WDM module to realize long-distance transmission
Stable and improved signal transmission quality
One Donor Unit can support up to 4 Remote Units to maximize utilization of fiber optic cable
USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise repeater's working status and download operational parameters to the repeater

Applications

  
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Outdoor:Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, …
Indoor:Hotels, exhibition centers, basements, shopping malls, offices, parking lots, …
 

Application Diagram

 
3G&Lte Quad Band Fiber Optic Booster Signal Amplifier

 

Technical Specifications

  
Master Unit
 
ItemSpecifications
Working FrequencyUplink703~748MHz/885~915MHz/1710~1770MHz/1920~1975MHz
Downlink758~803MHz/930~960MHz/1805~1865MHz/2110~2165MHz
Working Bandwidth45MHz/30MHz/60MHz/55MHz
MU Extensible Support the RU Quantity4
System Gain(MU+RU)≥50dB(Cable Access )
Manual Adjustable Attenuator 0~30dB/Step 1dB
Noise Figure@1RU Connection≤5dB
Optical Output Power≤0dBm@1310nm/≤3dBm@1550nm
Fiber Type/NumberSingle mode
Optical Wavelength1310nm/1550nm
Optical Connector Type4xFC/PC
RF Connector Type4xN-Female
I/O Impedance50Ω
Ingress ProtectionIP30
Local Monitoring InterfaceUSB2.0
Remote Monitoring Module3G Wireless Modem
Operating Temperature-25ºC~55ºC
Relative Humidity≤95%
Dimensions482.6x222.25x290mm
Weight≤20Kg
Mounting Type19" Rack Mount
Power Supply(Customized)AC100V ~240V, 50/60Hz
Power Supply ProtectionInclude Short Circuit, Over Voltage and Surge protection design
Power Consumption<50W
Battery Backup/Time30minutes
MTBF>50000hours

Remote Unit
 
ItemSpecifications
Working FrequencyUplink703~748MHz/885~915MHz/1710~1770MHz/1920~1975MHz
Downlink758~803MHz/930~960MHz/1805~1865MHz/2110~2165MHz
Working Bandwidth45MHz/30MHz/60MHz/55MHz
Frequency Stability(+/-0.01ppm)≤0.01ppm
RMS Output Power@Bandwidth≥43dBm
IM3@LTE900&LTE1800≥55dBc
Gain Flatness≤±3dB for all band
AGC/ALC FunctionSupport
AGC/ALC Range10dB
ACLR3GPP TS 25.104(R10),3GPP TS 36 104(R10)
Noise Figure@Max.Gain(DL/UL)≤5dB
Spurious and Emissions3GPP TS 25.143(R10),3GPP TS 36 143(R10)
Intermodulation3GPP TS 25.143(R10),3GPP TS 36 143(R10)
Out of Band Gain3GPP TS 25.143(R10),3GPP TS 36 143(R10)
EVM3GPP TS 25.143(R10),3GPP TS 36 143(R10)
Group(System) Delay≤1.5us
Ingress ProtectionIP65
Cooling FunctionHeatsink
Local Monitoring InterfaceUSB2.0
Remote Monitoring ModuleThrough MU via fiber
Optical Connector Type1xFC/PC
RF Connector Type1xN-Female
Operating Temperature-25ºC~55ºC
Relative Humidity≤95%
Dimensions980mm×420mm×230mm
Mounting TypeWall & Pole
Power SupplyAC100V- AC240V, 50/60Hz
Power Supply ProtectionInclude short circuit, Over Voltage and Surge protection
Power Consumption≤400W
Battery Backup/Time30minutes
MTBF>50000hours
Software Support MU/RU ModelsSame EMS support different model of MU/RU
Adjustable Parameters FunctionSet and display MU and RU ID and Location, adjust the Downlink/Uplink gain,
turn on/off the RF power amplifier, remote turn on/off or restart RU;
Monitored ParametersReal-time status for downlink output power(RSSI),temperature, optical power;
Alarm Type ClassificationThree levels (such as Major, Minor, and Warning)
Alarm ParametersReal-time alarm for door status, temperature, power supply, vswr, etc;

You Might Also Like