Factory Directly Engineer Oversea Installation Provided Walk-in Climatic Chamber

1.Imported parts
2.LED Touch Screen
3.One years free parts warranty
4.Fast delivery 
5.Long service lifetime

Optional accessories  
Cable Port: Two size of cable port is available: Φ50mm, Φ100mm.
Double door  
Pass room: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door.
Floor reinforcement: Can be fixed if heavy specimen placed in the chamber for test.
Carry-in inclined platform: Provided below the door to facilitate moving of  specimens in and out through the door.
Entire ceiling blow-out duct  
The extremely wide air inlet reduces the airflow rate (down to apprrox.0.5m/s)
Dehumidifier  
The rotation regenerating dehumidifier (M-300)ensures precise control of low humidity (21 ºC,23%RH)for electrostatic reliability tests.
Temperature and humidity recorder  
100mm width recording paper with 6 dots
180mm width recording paper with 12 dots
Status indication lamp  
    Provide to signal chamber status and warnings when normal running, a  malfunction running or stand by occurs.
Water purifier  
    Provided to keep the humidifier heater free from scale and ensure the supply of water to humidifier.
Power socket  
Air cooled type condense


KOMEG has business on reliability test equipment for more than 20years.
KOMEG  is widely recognized and recommended by the top 500comopanies and also customers from electronic, computer, home appliance, communications, chemical industry and scientific reseach.



In 2003, KOMEG did the reseach and development of the main equipment with the Peking University for state key laboratory of environment and pollution simulation(located in Shenzhen High-Tech Park, and funded by national natural science foundation.)


After-sale service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

Technical parameter: