Products

Automatic Plastic Bottle Blowing Mold Machine

China Automatic Plastic Bottle Blowing Mold Machine, Find details about China Bottle Blowing Machine, Bottle Mold Machine from Automatic Plastic Bottle Blowing Mold Machine

Certification
CE, ISO9001:2008
Trademark
Newlink
Specification
16
Origin
China
Certification
CE, ISO9001:2008
Trademark
Newlink
Specification
16
Origin
China

                      Automatic Plastic bottle blowing mold machine
Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.3percent.
Automatic Plastic Bottle Blowing Mold Machine

Technical parameter
ItemYCQ-2L-6E
Bottle type specificationCavity6
Theory output6000-8500
Max.volume2L
Bottle mouth maximum overall diameter28-38mm
Bottle biggest diameter100mm
Bottle maximum height330mm
Power specificationsLight tube quantity32pcs
Light tube power1.25KW
Maximum heating power40KW
All electric machine installation43KW
Actual consumption30.1KW
Air pressure specificationWork pressure7-9kg/cM3
Low-pressure gas consumption1600L/min
Blow bottle pressure25-35kg/cM3
Higher -pressure gas consumption4000Ltr/min
Forzen water specificationWork pressure5-6 kg/cM3
Temperature range10ºC
Consumption8000kcal/hr
Forzen water flow88L/min
Machine specificationSize of the machine5.3x1.6x1.9
Weight of the machine3750kg
 
ComponentsBrand/Origin
Cylinder SMC, Japan
Magnet valveSMC,Japan
RelayOMRON,Japan
Photoelectric switch OMRON,Japan
ContactorSchneider,France
Proximity switchOMRON,Japan
SensorOMRON,Japan 
Air SwitchSchneider,France
Switch power Schneider,France
Circuit breakerSchneider,France
Main Servo motorXINJIE CHINA
Touch screenTouchwin,China
PLCXINJIE CHINA




Configuration list
Control system
High response, image high-quality control system, specially support simple USB program upgrade, providing strong guarantee for equipment upgrade, troubleshooting.
Mitsubishi PLC, generalized programming language, program update, convenient update, free maintenance, high precision, fast response.
Pneumatic system
The servo motor use SMC cylinder.
Low-pressure control systems match with ait tak and PARKER, respectively assimilating and using the professional advantage of these top brands, making the machine work more faster and improve response speed.
High-pressure blowing control system all use air tac diameter is large, fast response speed.

Sensor system
High quality imported sensor & switch system including proximity switch, photoelectric switch, and electronic magnet switch to keep production process going step by step and avoid any possible damage on machine.
Heating system
automatic stretch blow molding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving. Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size. Each lamp's horizontal position is adjustable to keep the machine flexible.
Cooling bottle neck avoid bottle neck deformation
Clamping system
It adopts four-plate type toggle clamping unit to provide powerful clamping force and increase the clamping speed. Apart from the four-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping. 
Servo motor
 1, precision, speed and torque of the closed loop control;Overcome the problem of step motor.
2, rotational speed, high speed performance is good, generally rated speed can reach 2000 ~ 2000 RPM;
3.stability, low speed running smoothly, won't produce similar to the stepper motor during low speed running step run phenomenon.Suitable for high speed response to the requirements of the occasion;
4.timeliness: motor deceleration dynamic response time is short, usually within a few milliseconds;
 

The fully automatic pet bottle mchine.
Bar distance and circuitous type pre-form carrier systems, energy saving 50%
 
Automatic Plastic Bottle Blowing Mold Machine
Automatic Plastic Bottle Blowing Mold Machine

You Might Also Like