High Quality Fireproofing Silicon Sealant for Solar Cell
China High Quality Fireproofing Silicon Sealant for Solar Cell, Find details about China Silicon Sealant for Solar Cell, Fireproofing Silicon Sealant for Solar Cell from High Quality Fireproofing Silicon Sealant for Solar Cell
Basic Info.
Model NO.
BM800
Characteristic
Waterproof
Promoter Composition
Filler
Composition
Organic Material
Color
White
Shelf Life
12 Months
Viscosity
5000-30000
Shear Strength(MPa)
>=0.5
Elongation(%)
100-200
Adhesive
Silicone Sealant
Hardness (Shore a)
25+-5
Use Temperature (Degree)
-60~200
Dielectric Constant (1.2MHz)
2.8
Tensile Strength(MPa)
>=0.6
Certification
ISO9001
Trademark
Karefonte
Transport Package
Carton
Specification
Customize
Origin
China
HS Code
350691909
Model NO.
BM800
Characteristic
Waterproof
Promoter Composition
Filler
Composition
Organic Material
Color
White
Shelf Life
12 Months
Viscosity
5000-30000
Shear Strength(MPa)
>=0.5
Elongation(%)
100-200
Adhesive
Silicone Sealant
Hardness (Shore a)
25+-5
Use Temperature (Degree)
-60~200
Dielectric Constant (1.2MHz)
2.8
Tensile Strength(MPa)
>=0.6
Certification
ISO9001
Trademark
Karefonte
Transport Package
Carton
Specification
Customize
Origin
China
HS Code
350691909
Product Desciption
High Quality Fireproofing Silicon Sealant For Solar Cell
JRF-BM800 One component silicone adhesive sealant, has excellent resistance to cold-thermal changes, anti-stress properties, high low temperature resistance, at -60 ~ 200 ºCkeep long-term elasticity and stability, anti-UV, anti-aging, and has excellent insulation, moisture resistance, shock resistance ,corona resistance, anti-leakage and chemical resistance properties. in line with the EU ROHS directive.
Application :
- high frequency head, set-top boxes bonding fixed
- moisture-proof and waterproof encapsulation of sophisticated electronic components
- LED Display module and pixel waterproof encapsulation
- suitable for small or thin layer thickness (potting generally less than 6 mm) electronic components, modules, optoelectronic display and potting protection of circuit board.
How to use :
1.cleaning : clean up the surface of an object will be potting, remove rust, dirt and grease, etc.
2.sizing : unscrew the hose cap , squeeze glue on the clean surface, make it a natural leveling.
3.curing : sealing parts be placed in the air, after the epidermis formation, and then from the surface to the internal curing process, within 24 hours (at room temperature and 55% relative humidity), silicone sealant will solidify 2 ~ 4mm depth, the curing depth increases gradually with the extension of time , due to deep curing , need for a long time, so suggest single component silicone sealant generally used for small electronic components and a thin layer potting, 6 mm thick sealant fully cured need more than 7 days .
Note: it is recommended that the thickness is thicker than 6 mm potting choose double component types .
Before and after curing technology parameter table
The above performance data were at 25 ºC, relative humidity of 55% measured 7 days after curing. Our company does not undertake relevant responsibilities for test conditions different or product improvement of data different .
Specification :
100 ml /pc , 100pc / carton
Contact Information :
We can make many specifications according to your requests .
Free samples are available , for more information , pls kindly let me .
JRF-BM800 One component silicone adhesive sealant, has excellent resistance to cold-thermal changes, anti-stress properties, high low temperature resistance, at -60 ~ 200 ºCkeep long-term elasticity and stability, anti-UV, anti-aging, and has excellent insulation, moisture resistance, shock resistance ,corona resistance, anti-leakage and chemical resistance properties. in line with the EU ROHS directive.
Application :
- high frequency head, set-top boxes bonding fixed
- moisture-proof and waterproof encapsulation of sophisticated electronic components
- LED Display module and pixel waterproof encapsulation
- suitable for small or thin layer thickness (potting generally less than 6 mm) electronic components, modules, optoelectronic display and potting protection of circuit board.
How to use :
1.cleaning : clean up the surface of an object will be potting, remove rust, dirt and grease, etc.
2.sizing : unscrew the hose cap , squeeze glue on the clean surface, make it a natural leveling.
3.curing : sealing parts be placed in the air, after the epidermis formation, and then from the surface to the internal curing process, within 24 hours (at room temperature and 55% relative humidity), silicone sealant will solidify 2 ~ 4mm depth, the curing depth increases gradually with the extension of time , due to deep curing , need for a long time, so suggest single component silicone sealant generally used for small electronic components and a thin layer potting, 6 mm thick sealant fully cured need more than 7 days .
Note: it is recommended that the thickness is thicker than 6 mm potting choose double component types .
Before and after curing technology parameter table
| Model No. | JRF-BM800 | JRF-BM800 | JRF-BM800 |
| Before Curing | |||
| Appearance | Transparency | White | Black |
| Viscosity(cps) | 5000~30000 | 5000~30000 | 5000~30000 |
| Relative Density(g/cm3) | 1.00~1.05 | 1.1~1.2 | 1.1~1.2 |
| Surface Dry Time(min) | 1.5-5 | 3-15 | 3-15 |
| Completely Cure Time (d) | 3~7 | 3~7 | 3~7 |
| Curing Type | Neutral | Neutral | Neutral |
| After Curing | |||
| Hardness (Shore A) | 25±5 | 25±5 | 25±5 |
| Tensile Strength(MPa) | ≥0.6 | ≥0.6 | ≥0.6 |
| Shear Strength(MPa) | ≥0.5 | ≥0.5 | ≥0.5 |
| Elongation(%) | 100~200 | 100~200 | 100~200 |
| Use Temperature (ºC) | -60~200 | -60~200 | -60~200 |
| Volume Resistivity (Ω·cm) | ≥5.0×1016 | ≥5.0×1016 | ≥5.0×1016 |
| Dielectric Strength (kV/·mm) | ≥20 | ≥20 | ≥20 |
| Dielectric Constant (1.2MHz) | 2.8 | 2.8 | 2.8 |
| Loss factor (1.2MHz) | 0.001 | 0.001 | 0.001 |
The above performance data were at 25 ºC, relative humidity of 55% measured 7 days after curing. Our company does not undertake relevant responsibilities for test conditions different or product improvement of data different .
Specification :
100 ml /pc , 100pc / carton
Contact Information :
We can make many specifications according to your requests .
Free samples are available , for more information , pls kindly let me .
You Might Also Like
All Kinds of Chassis Compatible 37m Concrete Pump Truck in H......
China Factory Price Aluminum Traffic Sign Board for Export
Shenzhen Whosale Korea Mobile Phone S4 I9505
China Farm Machinery Disc Harrow Tractor Attachments Cultiva......
Luen 2021 13000* 2550 *1650 Skeleton Container Semi Trailer ......
BSPT DN15 1000wog SS316 2PC Ball Valve DIN SS304
RC3/4' Precision Compressed Air Filter for Refrigerate A......
Power Line Accessories NLL Series Aerial Strain Clamp with 2......
All Color Ink! ! Pigment Ink for Epson Printer
Custom Size Thickness Aluminum Foil Tape Duct Insulation Tap......