Corrugator Belt Is for Corrugated Board Production Line and Developed Specifically for Double Facer

China Corrugator Belt Is for Corrugated Board Production Line and Developed Specifically for Double Facer, Find details about China Corrugator Belts, Corrugated Cardboard Production Line from Corrugator Belt Is for Corrugated Board Production Line and Developed Specifically for Double Facer

Basic Info.

Trademark

YIKE GROUP

Specification

1.88x45M

Origin

China

HS Code

59100000

Trademark

YIKE GROUP

Specification

1.88x45M

Origin

China

HS Code

59100000

Product Desciption

Product Description

I: Introduction

Common edge Corrugator belt also named Corrugated board conveyor belt.

Common edge Corrugator belt is for Lower speed of corrugated board production line.

II: Corrugator Belt Seam

1: USA Fastener clipper With Rubber

2: Hot Jaw Lacing

III: Technical Specifications:

Type	YKC-Common edge
Thickness	(9±0.30)mm
Width	(1600-2800)mm
Heat-resistance	240ºC
Tensile strength	75Mpa
Coefficient of friction	≥0.4u
Weight per unit	(7.5 ± 0.3)kg/m2
Air-permeability	2.2m3/m2min.

IV: Products Features

Tensile strength	Warp direction (63-75) Mpa in dry mode
Heat resistance	Raw materials are polyester synthetic fiber, softening point≥260ºC
Moisture absorption	Quick absorption and emission of heat, therefore cardboard can be quickly dried
Seams	Belt seam part is fabricated with imported steel fasteners and filled with rubber, flat surface, heat- resistance, fastness and non-marking
Suitability	Suitable for BHS, JS, TCY, CHAMPION, YIKE GROUP, FOSBER corrugators, various cardboards and some particular operation mode.
Geometrical dimension	Steady belt dimension, high weaving density, low stretching and contraction and good contact between belt surface and cardboard.
Service life	As long as the same products imported abroad.