Brewer Grains are major by-products in beer production. However, high moisture(80-85%)brings a lot of problems with utilization and transportation. Today the best way to solve this problem is to dehydrate Brewer Grains and transfer them into composite feed, which could be effectively absorbed. Besides the nutrient in Brewer's Grains will not lose in the process of dehydration and drying.Product Features
1.PLC smart control & high automaticity. The performance of the rotary dryer and moisture content of dry materials is automatically controlled in stable states.
2.High heat efficiency. The design of multiple circumferential flight combinations and flow rate adjustment devices ensures the control of the drying period and temperature distribution. The effect of insulation is as high as 70% and raises heat efficiency by 20%.
3.Four-wheel drive, more steady and stable.
4. Save 50% space compared with traditional dryers and reduce 50% civil investment.
5.Convenient variable frequency control systems. The customer could change the material flow rate and product moisture based on their needs.
6. Environmental and safe. Modular configuration of dust collection and purification systems
7.More choices for novel air furnaces with high efficiency, convenient manipulation, and energy control, which could reduce 30% energy cost and 20% electric cost.Cool Material flow: After the dehydration, BSG is delivered to the cylinder and realizes the concurrent drying process. Wet materials are lifted up and down by the internal flights and pushed through three layers in a spiraling pattern, which realizes the heat exchange between cool materials and heated air. The dry materials could pass through the drum quickly with the air force. Wet materials would be dropped gradually and get fully dried to 10% to 15% moisture. The eventual dry materials would be delivered out of the systems through a screw conveyor. Inside the drum, there is a vibration cleaning device, which could prevent the adhesion between materials and drums. Hot fluid(air) flow: Cool air is compressed into the furnace through a blower and heated to 500ºC to 500ºC. Then the heated air taken into the drum by a draught fan would exchange the heat with wet materials, absorb the moisture, and get delivered out of the drum with the temperature reduction of 55 to 60ºC. The exhaust gas will be dealt with a cyclone dust extractor and wet dust extractor, which would eventually meet the exhaustion requirement. Package & Delivery