Product description:
Chevron belts transport bulk or packed materials on a steep slope, the design reduces the risk of slipping or falling back, even transportation on an inclined plane. Compared with flat belts, a larger quantity of materials can be transported, and the top cover and profile are moulded in one piece for better adhesion and resistance.

SR-Oil Resistant belt covers are made with Nitrile (NB), Styrene Butadiene (SB) and Neoprene (CR) compounds with added fillers to provide maximum protection for the belt carcass from the penetration of grains,turpentine from bark wood chips and sap and mild mineral solvents. It also prevents the conveyor belt from swelling and softening when it comes in contact with greasy or mild oily materials, contributing to belt deterioration.

       

Selection of a type and height of profiles depends on the material to be conveyed and the angle of inclination:

Belt Application:

• quarries, sandpits
• cement works, lime works
• farming: conveying of beets, grains, potatoes, fertilizers, wooden chips
• coal and coke transport
• sugar refineries
• salt mines
• recycling: garbage
• Approximately 30 degrees for slightly rolling materials: gravel, coal, etc.
• Approximately 40 degrees for clumping or sticky materials: wet sand or earth.
• For greater inclined angles, side wall belting may be more suitable.

Feature:
   •Excellent abrasion resistance (loss from abrasion 90mm³ or less)
   •High tensile strength
   •Excellent troughability
   •High resistance against impact
   •Strong adhesion and less ply separation
   •Good accommodation to carrier roller and being well kept straight on

Specification:
Pattern: Open V, Closed V, U type, Y type etc.
Belt width: B400-B1400mm
Pattern height: 5, 10, 15, 20, 25, 30mm
Pattern pitch: 125, 200, 250, 300.400, 500mm and acailable request.

Factory:


Our packing:
There is a variety of packing solutions we can offer, and also be customized according to your requirements or market's requires, such as different colors and lables.


SR Belting Business FAQ

Q:What is your production capacity?

A:SR Belting has 11 production lines and its capacity is 5000meters per day.

Q:How about your lead time?

A: It is 20 ~ 25days for regular belts.

Q: What is your M.O.Q ?

A: M.O.Q is 1*20GP.  The less quantity is ok but its cost will be higher.

Q: Do you have belt warranty?

A: At least 12months service life for regular belt. HR T4+ belt 3~6month.

Q: What certificates do you have ?

A: SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.

Shandong Shengrun Rubber Co.Ltd ( SR Belting ) is a manufacturer which has specialized in producing conveyor belt for more than 20 years. Products are used in mining, coal ,port, metallurgy, cement, transportation and hoisting of materials.

SR Belting always strives to assure the safety of conveyor belt to meet and exceed beyond the national standards and customers satisfactions with its products. SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.

SR Belting manufactures conveyor belts based on customers' requirements as Global ISO, German DIN, SANS and RMA etc.

We have a independent design, research and development capabilities and can be customized to customer requirement.
Our company possesses a complete set of detection equipment, the independent chemical analysis and physical labs, ensuring all the raw materials to provide excellent quality products. 

We sincerely welcome friends at home and abroad to visit our factory to discuss cooperation and agency business.

Our partners: CHINA SHENHUA, CNBM, SINOMA, LAFARGE, SHOUGANG GROUP, CHINA HUANENG