Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier , Port Docks

China Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks, Find details about China Pneumatic Fender, Pneumatic Rubberfender from Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks

Shackle/Swivel
Free
Synthetic Tyre Cord
with High Breaking Strength
Thickness
More Than 18mm
Lead Time
Within 20 Working Days
Application
Ship to Ship/Ship to Quay
Trademark
NanHai
Transport Package
Deflated or Tray
Origin
China
HS Code
40169400
Shackle/Swivel
Free
Synthetic Tyre Cord
with High Breaking Strength
Thickness
More Than 18mm
Lead Time
Within 20 Working Days
Application
Ship to Ship/Ship to Quay
Trademark
NanHai
Transport Package
Deflated or Tray
Origin
China
HS Code
40169400
Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks

NanHai - Pneumatic Rubber Fenders Series
NanHai - Pneumatic Rubber Fender (CTN).

Named NanHai - Pneumatic Rubber Fender, because of his High Performance in protective,
Various performance indicators beyond International Standard ISO17357. Protect Ship Safety Fully.
Burst pressure factor highest could reach 5 times Than international standard.

 

NanHai - Pneumatic Rubber Fender Application

As one ideal protection tool for Marine application, NanHai - pneumatic fender has become a protection medium against collision among ship-to-ship (STS), ship to quay (STQ) and ship-to-berthing (STB), they are widely used for large tankers, vessels, docks, harbor wharfs and ocean platforms. It uses compressed air as a buffer medium to absorb the impact energy of ship. Therefore, compared with general compressed rubber fender, it has large energy absorption, small reaction force, large contact area with the ship, and can be adapted to the ship's docking in all directions.
Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks
NanHai Pneumatic Rubber Fender Series Fender

       · TankersGas Carriers and Bulk Cargo Ships

       · Temporary of permanent installations
       · Rapid response and emergency fendering       · As stand-off fenders to realign ships with shore facilities
 

Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks
NanHai - Pneumatic Rubber Fender Advantage and Benefit
 

 · Easy to maintain · High Safety Operation
 · Natural rubber Material · Adapt to Various Harsh Environments
 · D2/D3 High Strength Tyre Cord Layers · Test Compression over 3000 Times
 · Self-patented safety valve · Fast Inflation
 · Satisfied with CCS,BV,RS,ABS,LR etc. test requirements
 · Match but Beyond International Standard ISO17357
 · Highest Burst Pressure could Reach 5 times than international standard
 · Lower transportation cost, Fender transportation can be folded. Saving 2/3 of transportation cost


NANHAI FLOATING PNEUMATIC SHIP RUBBER FENDER STRUCTURE

Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks

NO.PARTS NAMESPEC.
1Fender Body-
2TyreRubber
3Rubber SleeveRubber
4ChainH.D.G
5Bow ShackleH.D.G
6D ShackleH.D.G
7Towing RingH.D.G
8ShackleH.D.G
9SwivelH.D.G

 

NanHai-Pneumatic Fenders consists of 3 different layers: the outer rubber layer, the synthetic-cord layer for reinforcement and the inner rubber layer, With the feature of the soft reaction force. They are supplied with two different inside pressure levels to cover a wide performance range. They are manufactured according to ISO 17357-1:2014.

Net type pneumatic fenders are fitted with a chain-tyre net. The chain-tyre net consists of used tires that are connected by a network of horizontal and vertical chains, which adds further protection to the fender body.

Outer rubber layer

Rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.

Synthetic-tyre-cord layer forreinforcement

Layer made of synthetic-tyre cordfabric, whichmaintains the internalair pressure of the fender.

Inner rubber layer

Liner of a rubber membrane thatsealsthepressurized air insidethe fender.

Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks


CLASSIFICATION OF PNEUMATIC SHIP RUBBER FENDER
 

Fender types:

1.Net-type fenders: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).

2.Sling-type fender: fenders which are designed to be used without a protection net.

 
 

Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port DocksMarine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks
Net-type fenderSling-type fender


Initial internal pressure:

1.Pneumatic fender 50 (initial internal pressure 50 KPa)

2.Pneumatic fender 80 (initial internal pressure 80 KPa)
 

Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks
PERFORMANCE CALCULATION OF NANHAI - PNEUMATIC FENDER

The volume of the fender at free state is Vo, and the interior pressure (i.e. original pressure) is Po; when the fender is compressed by dx, its volume is Vx, its interior pressure Px, and its contact Sx.
Its counterforce, Rx, can be calculated as follows: Rx=Px:Sx
At this time, its energy absorption, GEA, calculated as follows: GEA=JxoRxdx
The curve of interior pressure Vs deformation relationship during fender compression test is listed in Table Size, performance and weight of pneumatic rubber fender

Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks

 

NANHAI-PNEUMATIC FENDER SPECIFICATION

 

Nominal sizeINTERNAL PRESSURE 0.08Mpa
at 60% deflection
Safety-valve pressure settingTesting pressure
DiameterLengthEnergy absorptionReacion forceHull pressure
mmmmkN·mkNkPakPakPa
5001000885174-250
60010001198166-250
700150024180177-250
1000150045239160-250
1000200063338174-250
1200200088390166-250
13502500142561170-250
15003000214761174-250
17003000287840168-250
200035004301150168-250
250040009251815180230300
2500550013172653195230300
3000600018902906196230300
3300450016402476171230300
3300650025323961191230300
33001060042816907208230300
4500900066337551192230300
450012000903710490202230300

 

Nominal sizeINTERNAL PRESSURE 0.05Mpa
at 60% deflection
Safety-valve pressure settingTesting pressure
DiameterLengthEnergy absorptionReacion forceHull pressure
mmmmkN·mkNkPakPakPa
5001000664132-200
6001000874126-200
700150017137135-200
1000150032182122-200
1000200045257132-200
1200200063297126-200
13502500102427130-200
15003000153579132-200
17003000191639128-200
20003500308875128-200
250040006631381137175250
250055009432019148175250
3000600013092387148175250
3300450011751884130175250
3300650018143015146175250
33001060030675257158175250
4500900047525747146175250
45001200064737984154175250
 

FOR NANHAI BRAND

Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks
NanHai Brand established since 2003, Own advanced brand effect in the world. we have always focussed on our valued customers and committed to airbags and pneumatic fenders manufacture and R&D. As time moves on, we are continually engrossed in the challenges of this ever changing world.
Our commitment to you, our customers, is that we endeavour to provide the best value solutions to your technology problems.
During company development history have very famous project case and abundant experience. 
We look forward to meeting your challenges of the future as a significant supporter of your business. 


FOR NANHAI QUALIFICATION

Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks
Marine Fender Floating Inflatable Type for Barges Sts Transfers and Pier, Port Docks
FAQ
1."I have ships but don't know how to choose the size of marine fenders, can you help me."
Answer: Don't worry. We have more than 20 years' experience. Pls tell me information of your ship, we can suggest suitable size for you.

2."I want to try your marine fenders, but I never use it and don't know how to use, can you help me?"
Answer: Don't worry. We will send instruction book together with marine fenders.

3."What's your MOQ?"
Answer: Our MOQ is 1PC.

4."How about the lifespan of your marine fenders?"
Answer: Designed lifespan of our marine fender is 6 to 12 years

5."What's your warranty period?"
Answer: Our warranty period is 2 years. we will responsible for the repairment or replace the new ones for you if it proved to be our quality problem.

6."What kind of certificate can you provide ?"
Answer: CCS, SGS, BV, ISO17357 etc. certificate is available