Big air flow welding cutting fume strainer

Features 

1. Fume collector is configured with one suction arm. The bottom has two directional and two rotary   
    polyurethane casters with brake device for easy moving and stationing. It is suitable for the purification of
    fume  and dust generated in all kinds of welding, grinding and other places as well as for collecting rare metal
    particles and precious materials.

2. Suction arm can be rotated 360 °, and can flexibly and easily reach the position and angle of sucking by 
    pulling the handle of  the hood and position by itself in the absence of external force. Depending on needs, 
    2m, 3m flexible suction arm are available. Suction hose uses high temperature-resistant, flame retardant and
    wear-resistant composite materials, and will not crack after burning through by spark and has a longe usage
    life; the arm diameter is 160mm.

3. Fume generated in working will be sucked into the purifier through the hood, first through the fire resistance
    net, large particles and sparks produced in grinding is intercepted and separated; then enter fume directing
    layer,i.e. deflector,  to ramify the fume to avoid residual spark into the main filter cartridge directly;  at last the
    fume enter the third layer.

4. Power phase sequence instructions, short-circuit protection for lack of phase, with shut down protection
    measures when too high temperature.

5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-
    resistant compounded materials, without crack and damage to sparks.

6. The filter element of the welding fume  extractor is produced using imported PTFE membrance filter
    material of high filtration precision and can filte out welding fume of 0.1μm.

Technology parameter: 

 
                         

                                                 Company Information