China Wholesale Brass Bronze Induction Melting Furnace for Sale
China Wholesale Brass Bronze Induction Melting Furnace for Sale, Find details about China Bronze Induction Melting Furnace, Bronze Melting Furnace from China Wholesale Brass Bronze Induction Melting Furnace for Sale
Basic Info.
Model NO.
GW-500KG
Melting Material
Brass, Bronze Melting Furnace
Furnace Type
Medium Frequency Furnace
Furnace Capacity
50-5000kg
Delivery Time
15-30 Days
Warranty
1 Year at Least
Trademark
HengYang
Transport Package
International Export Packing Standard
Specification
500KG
Origin
China
HS Code
8514200090
Model NO.
GW-500KG
Melting Material
Brass, Bronze Melting Furnace
Furnace Type
Medium Frequency Furnace
Furnace Capacity
50-5000kg
Delivery Time
15-30 Days
Warranty
1 Year at Least
Trademark
HengYang
Transport Package
International Export Packing Standard
Specification
500KG
Origin
China
HS Code
8514200090
Product Desciption
Introduction and application
This is the device converting three phase power current into single phase intermediate frequency current and enabling metal to produce eddy current loss through electromagnetic field induction to achieve heating and melting and is applicable to melting, heating or holding of steel, copper, aluminum, zinc, tin, nickel silver and other ferrous or nonferrous metal and alloy material, as well as heating treatment prior to forging, sintering and tube-bending forming in casting and melting industries.
==Main Models And Technical Parameters==
Safety Protection:
• Main circuit short circuit protection
• Main circuit phase loss protection
• Main circuit phase fault protection
• SCR over-current protection
• SCR overvoltage protection
• Cooling water temperature protection
• Low water pressure protection
• Furnace leakage protection
• Intermediate frequency power failure protection
• Intermediate frequency electric furnace fault protection rate and increase the life obviously
Features:
1.Saving Features
As the heating temperature fast, so very little oxidation, oxidation frequency heating forging burning only 0.5%, gas furnace heating oxidation loss of 2%, 3% of coal-fired furnace, intermediate frequency heating technology and materials, each ton forgings and burning stove saves at least compared to 20-50 kg of steel materials. Its material utilization up to 95%. Since the heating uniform heating, the temperature difference between the minimum core table, so in terms of forging also greatly increases the life of forging dies, forging surface roughness is less than 50um saving technology, frequency heating oil heating proportion of 31.5% ~ 54.3% energy saving, gas heating energy than 5% to 40%. Good heating quality, reduce scrap 1.5%, increase productivity by 10% to 30%, extend tool life by 10% to 15%.
2.Environmental Features
Working environment is superior, to improve the working environment of workers and the company's image, no pollution, low energyInduction furnace and stove,, workers will no longer be compared to the hot sun baked and smoked coal stove, but can reach the targets environmental protection departments, while the external image of the company and establish a future with the forging industry trends.
Product Details:
Spare part 1:Thyristor
Brand: TECHSEM Group and CSR Group, the above two companies are leading thyristor manufacturing industry in China
Function: Stable, have strong ability to resist strong current, durable, not easy to damage
Spare part 2:Control circuit board
Brand: Hengyang Furnace, developed by our own R&D Team
Function: Double tested before production, carefully checking, have a great control on the quality, every customer comment its stablility.
Spare part 3:Induction coils
Induction coil installs in the central of the furnace, it has spiral body with rectangular empty brass circle around, the pipe center should be cooled with water. Copper bar outside induction coil will connect with water-cooling cable. The lining closes to induction coil, which made by burden, the method you can find in related parts below.
Why Choose us?
1,Low power consumption
Large current system made of pure copper as conductive medium, the whole circuit with less resistance. Electrode arm shaped as copper-clad box type, resistance and heat can be reduced efficiently. Reasonable arrange of all conductive systems to minimize the resistance of every circuit.
2,Safety & Stability
Full set of hydraulic driving system equipped with accumulator to ensure stability of facilities in the operation process. Whist, equipments can go on the motion when there any emergency accidents happen.
3,High Power Factor
Our power factory could reach over 98%, which could greatly reduce the capacitor box quantities. However we still equip enough capacitor box quantities, which mean your furnace is much much more efficient.
4.High flexibility & Maximum simplicity of operation
HMI used in electrical automation control, interface simulates the real form of furnace, which make the operation more convenient. Mixing feedstock, charging feedstock, melting, tapping all the commands can be implemented by computer.
5.More Durable
We get 6 thyristors on the left, 8 on the right, so even if one thyristor is damaged, our furnace still could be continued use. But many other factories only get only 4 on the right,the whole equipment cannot be used anymore when one thyristor is damaged.
After-sales service:
a. Cooperate with guidance to check the buyer installation work;
b. Internal and electrical wiring connections between equipment;
c. Site commissioning;, according to the actual equipment adjust to the best state;
d. Direct buyer operating personnel to the correct use of operating equipment;
e. Guidance on site security considerations;
f. To guide the buyer maintenance personnel troubleshooting methods;
g. Provide equipment specification;
Whataspp:+86 18098177996!!!!
This is the device converting three phase power current into single phase intermediate frequency current and enabling metal to produce eddy current loss through electromagnetic field induction to achieve heating and melting and is applicable to melting, heating or holding of steel, copper, aluminum, zinc, tin, nickel silver and other ferrous or nonferrous metal and alloy material, as well as heating treatment prior to forging, sintering and tube-bending forming in casting and melting industries.
==Main Models And Technical Parameters==
| Equipment Type (Furnace capacity) | Power input (three-phase four-wire 50/60HZ) | Power Output | Melting time (Minutes) | Electricity consumption per ton of material (KW) | ||||||||
| Equipment power (kw) | Incoming line voltage (V) | Into the line current (A) | Matching transformer | DC current (A) | DC voltage (V) | IF voltage (V) | IF frequency (Khz) | Steel | Copper | Aluminum | ||
| GW--0.05T | 50 | 380 | 80 | 50 | 100 | 500 | 750 | 1 | 20-40 | 750 | 510 | 650 |
| GW--0.1T | 100 | 380 | 160 | 100 | 200 | 500 | 750 | 1 | 20-40 | 700 | 510 | 640 |
| GW--0.15T | 160 | 380 | 256 | 200 | 320 | 500 | 750 | 1 | 20-40 | 650 | 500 | 630 |
| GW--0.25T | 200 | 380 | 320 | 250 | 400 | 500 | 750 | 1 | 20-45 | 650 | 500 | 610 |
| GW--0.35T | 250 | 380 | 400 | 315 | 500 | 500 | 750 | 1 | 20-45 | 650 | 490 | 600 |
| GW--0.5T | 350 | 380 | 560 | 400 | 700 | 500 | 750 | 0.8 | 30-50 | 630 | 480 | 570 |
| GW--0.75T | 500 | 380 | 800 | 630 | 1000 | 500 | 750 | 0.8 | 40-50 | 620 | 470 | 560 |
| GW--1T | 800 | 380 | 1280 | 1000 | 1600 | 500 | 750 | 0.7 | 40-50 | 620 | 460 | 550 |
| 750 | 656 | 1000 | 808 | 990 | 1480 | |||||||
| GW--1.5T | 1000 | 380 | 800 | 1250 | 1000 | 500 | 750 | 0.7 | 40-60 | 600 | 450 | 540 |
| 750 | 820 | 1250 | 1010 | 990 | 1480 | |||||||
| GW--2T | 1400 | 750 | 1148 | 1800 | 1414 | 990 | 1480 | 0.5 | 45-60 | 600 | 440 | 530 |
| 750 | 574 | 1800 | 707 | 990 | 1480 | |||||||
| GW--3T | 2000 | 750 | 820 | 2500 | 1010 | 990 | 1480 | 0.5 | 50-70 | 580 | 430 | 520 |
| GW--5T | 3000 | 950 | 1140 | 4000 | 1190 | 1260 | 1900 | 0.3 | 50-80 | 570 | 420 | 510 |
| GW--10T | 6000 | 950 | 2280 | 8000 | 2380 | 1260 | 1900 | 0.3 | 50-90 | 560 | 410 | 490 |
| GW--15T | 8000 | 950 | 1520 | 10000 | 1590 | 1260 | 1900 | 0.3 | 50-90 | 550 | 400 | 480 |
| GW--20T | 10000 | 950 | 1900 | 12500 | 1980 | 1260 | 1900 | 0.25 | 50-90 | 530 | 400 | 470 |
| GW--30T | 15000 | 950 | 2850 | 20000 | 2980 | 1260 | 1900 | 0.25 | 50-90 | 520 | 400 | 450 |
Safety Protection:
• Main circuit short circuit protection
• Main circuit phase loss protection
• Main circuit phase fault protection
• SCR over-current protection
• SCR overvoltage protection
• Cooling water temperature protection
• Low water pressure protection
• Furnace leakage protection
• Intermediate frequency power failure protection
• Intermediate frequency electric furnace fault protection rate and increase the life obviously
Features:
1.Saving Features
As the heating temperature fast, so very little oxidation, oxidation frequency heating forging burning only 0.5%, gas furnace heating oxidation loss of 2%, 3% of coal-fired furnace, intermediate frequency heating technology and materials, each ton forgings and burning stove saves at least compared to 20-50 kg of steel materials. Its material utilization up to 95%. Since the heating uniform heating, the temperature difference between the minimum core table, so in terms of forging also greatly increases the life of forging dies, forging surface roughness is less than 50um saving technology, frequency heating oil heating proportion of 31.5% ~ 54.3% energy saving, gas heating energy than 5% to 40%. Good heating quality, reduce scrap 1.5%, increase productivity by 10% to 30%, extend tool life by 10% to 15%.
2.Environmental Features
Working environment is superior, to improve the working environment of workers and the company's image, no pollution, low energyInduction furnace and stove,, workers will no longer be compared to the hot sun baked and smoked coal stove, but can reach the targets environmental protection departments, while the external image of the company and establish a future with the forging industry trends.
Product Details:
Spare part 1:Thyristor
Brand: TECHSEM Group and CSR Group, the above two companies are leading thyristor manufacturing industry in China
Function: Stable, have strong ability to resist strong current, durable, not easy to damage
Spare part 2:Control circuit board
Brand: Hengyang Furnace, developed by our own R&D Team
Function: Double tested before production, carefully checking, have a great control on the quality, every customer comment its stablility.
Spare part 3:Induction coils
Induction coil installs in the central of the furnace, it has spiral body with rectangular empty brass circle around, the pipe center should be cooled with water. Copper bar outside induction coil will connect with water-cooling cable. The lining closes to induction coil, which made by burden, the method you can find in related parts below.
Why Choose us?
1,Low power consumption
Large current system made of pure copper as conductive medium, the whole circuit with less resistance. Electrode arm shaped as copper-clad box type, resistance and heat can be reduced efficiently. Reasonable arrange of all conductive systems to minimize the resistance of every circuit.
2,Safety & Stability
Full set of hydraulic driving system equipped with accumulator to ensure stability of facilities in the operation process. Whist, equipments can go on the motion when there any emergency accidents happen.
3,High Power Factor
Our power factory could reach over 98%, which could greatly reduce the capacitor box quantities. However we still equip enough capacitor box quantities, which mean your furnace is much much more efficient.
4.High flexibility & Maximum simplicity of operation
HMI used in electrical automation control, interface simulates the real form of furnace, which make the operation more convenient. Mixing feedstock, charging feedstock, melting, tapping all the commands can be implemented by computer.
5.More Durable
We get 6 thyristors on the left, 8 on the right, so even if one thyristor is damaged, our furnace still could be continued use. But many other factories only get only 4 on the right,the whole equipment cannot be used anymore when one thyristor is damaged.
After-sales service:
a. Cooperate with guidance to check the buyer installation work;
b. Internal and electrical wiring connections between equipment;
c. Site commissioning;, according to the actual equipment adjust to the best state;
d. Direct buyer operating personnel to the correct use of operating equipment;
e. Guidance on site security considerations;
f. To guide the buyer maintenance personnel troubleshooting methods;
g. Provide equipment specification;
Whataspp:+86 18098177996!!!!
You Might Also Like
ASTM A325 Tension Control Structural Bolts Manufacture (1 1/......
Digital Printing Inkjet Canvas Semi-Glossy Polyester Canvas ......
Custom Printed 2.0* 90cm Silk Printing Metal Hook Coolest La......
CPE Resin CPE 135A CPE 135b CPE130
Factory Supply Pharmaceutical Intermediate Raw Material Whit......
Hospital 12 Channel Portable ECG Machine (THR-ECG-120G)
Upper Fuser Roller for Samsung Ml1210 808 4500 550 555p
3V Built-in Battery Smoke Detector
UL RoHS Approved High Efficiency Ut20 and Ut24 Filter Induct......
High Precision Surveying Drone Aerial Surveying Aircraft New......
Best Safety Household and Gardening Work Protective PVC Dott......
Hicas Multi Head Cutting Circular Trim Saw for Sale