HB002 Excellent Performance Hospital Baby Infant Incubator for Neonatal Nursing
1.The world trend of double inclined plane organic glass
Many countries adopt double inclined plane organic glass, which gives a visual sense of relaxed ease, a full range of observed objects without deformation and reflection, conveniently for medical staff monitor care.
2.Full open front door
Large front door, all the flip open, easy to operate for medical staff and easy to get in and out for infant.
3.Suitable temperature for infant
Temperature system adopts microcomputer control, high precise, small temperature fluctuation
4.Inclination of large bassinet is adjusted steplessly.
Infant bassinet tilt baby bed can be used for about 8 degrees of tilt, bed area is 10% larger than the average incubator.
5.Two-way pulling out of the bassinet
Bassinet can be pulled out smoothly from the front door or right side door, to facilitate neonatal medical care.
6.X-ray cassette under the bassinet
China's first infant incubator with X-ray radiography, radiography cassette underneath beds, non-metal transparent window allow X-ray pass, no leaving the infant incubator for X-ray photograph.
7.Large display window for multi-parameters
Setting value and real value display at the same time, medical staff can know the infant incubator operations from long distance by large LED digital tube.
8.Concealed humidification devices
Incubator is installed the spray humidifier which is a national initiative, the humidity can be set freely, and controlled by microcomputer, humidity in the baby's hood can be accurately maintained at the set value within ± 5%.
9.High-quality air filter net
Superior performance of the filter adsorption can make air into the incubator more clean, and easy to clean replacement.
10.Excellent performance cleaning and disinfection
Whole up-body overturned function make the medical staff easy to clean and sterilize.
11.Failure alarm indication
Incubator security be guaranteed fully, the battery voltage alarm and water alarm is a national initiative.
12.Computer interface
Communication interface far distance control available.
13.Height adjustment function
Electric lifting structure for 150mm height adjustable range, to suit different medical staff operations.
Optional:
Oxygen concentration analyzer
Hypoxic, or oxygen excess are detrimental to infant training and development, the oxygen concentration analyzer can detect the baby cabin oxygen concentration
Up blue-light box
Can be cured in blue-light
Down blue-light box
Can be cured in blue-light
Specification:
Item | specifications |
heating voltage | ≤300W±10% |
Incubator temperature control range | 25-37 °C |
Skin temperature control range | 34-37.5 °C |
Skin temperature sensor accuracy | ≤ 0.3 °C |
Bed surface temperature average | ≤1.5 °C |
Humidity accuracy | ≤10% |
Humidity display range | 30-99% |
Temperature fluctuation | ≤0.5 °C |
Temperature rise time | <40min |
Temperature deviation alarm range | For incubator: ±3 °C |
For skin: ±1 °C |
indoor noise of incubator | ≤45dB |
Alarm noise | Indoor: ≤70dB |
Outdoor: ≥60dB |
overtemperature alarm | ≤38 °C |
Second overtemperature alarm | ≤40 °C |
Alarm of sensor fault | response time <4s, Continuous alarm |
Power failure alarm | response time <5s, Continuous alarm |
Air blower stopping alarm, air-duct block alarm | response time <30s, Continuous alarm |
Lack water alarm | Inlet tube water level is under the sign of "MIN" |
Upper-body overturn angle | 30 °C |
Electric lifting distance | 150mm |
Inclination of large bassinet | 0-8°stepless |
Temperature display mode | LED digital display |
Infant incubator body material | Organic glass, double walls hood, cabinet case |
Oxygen concentration measurement(optional) | 0 ~ 100% |
Panel automatically locked | yes |
Operation window | No less than 5 pcs, with auxiliary air sensor |
Panel feature | Touch panel, water-proof, sensitivity and reliability |
Low battery alarm | <4.5V |
Safety performance | According with class I, IEC601-1, 1998.GB9706.1-1995 and GB11243-2000 |
About Wanrooemed:
1.With 20 years production experience
2.Plastic coating processing, plastic siderails, headboard/foot board, castors all manufactured by our own company, easy to control quality and quick delivery
3.Strict raw material inspection and quality control, meet ISO9001 and 13485 quality management system
4.Product pass CE(TUV) certificate
5.Export more than 40 countries, including Australia, USA, UAE, UK, South America,, Malaysia, Philippines, Saudi Arabia etc.
6.One professional export here give you better service.
Contact Information:
WANROOEMED |
Jiangsu Yangzi River International Metallurgy Industrial Park, Jinfeng Town, Zhangjiagang City,215600,Jiangsu, China |
Contact Person | Penny |
Mobile | +0086-18118486276 |
Fax | 0086-512-58810663 |
| |
http://wanrooemed.en.made-in-china.com |