China Strong Car Body Spray Paint Room Spray Booth with Powder Coating, Find details about China Paint Booth, Spray Booth from Strong Car Body Spray Paint Room Spray Booth with Powder Coating
Outside Dimension (mm) | 7006*5356*3450(L*W*H) | Inside Dimension(mm) | 6900*4000*2650(L*W*H) |
Front Door(mm) | 3000*2600(W*H) | Service door (mm) | 1800*650(W*H) |
Total Power | 17KW | ||
Cabin system | Wall panel | 50mm rock-wool panel, steel sheet thickness: 0.6mm | |
Ceiling panel | 50mm rock-wool panel. steel sheet thickness: 0.6mm | ||
Basement | 300mm depth, full grids basement | ||
Ramps | Three pieces 2000*900mm ramps | ||
Glass | 4mm safety tempered glass | ||
Windows | Square glass windows | ||
Air Make-up System | Air Inlet fan system | 1*7.5kw turbo fan, proof-explosion motor, Ex rated | |
Exhausted fan system | 1*7.5KW turbo fan, proof-explosion motor, Ex rated | ||
Ai capacity for fresh air | 25000m3/h | ||
Air Flowing speed | 0.3m/s in empty booth | ||
Air ducting | 8meters straight ducting, one flop damper and one weather hood. | ||
Purification System | Pre-filter | G3 grade, Pockets filter. | |
Ceiling filter | EU5 / F5 | ||
Floor filter | green fiber glass filter / G3 grade | ||
Exhausted fan Filters | green fiber glass filter and active carbon | ||
Heating System | Heat Exchanger | SUS304 material, argon arc welding. | |
Heating burner: | RielloG20 diesel oil burner(gas burner for option) | ||
Heating productivity | 180000Kcal/h | ||
Spray to baking switch | 20N BELIMO brand electrical damper | ||
Chimney ducting | 3 meters stainless ducting and one chimney elbow | ||
Max heating temperature | 80degrees | ||
fuel consumption | 6-8L /vehicle | ||
Lighting System | Ceiling lights | 8 Units, each 4 x 36W Philips lamps, Total 1152 W | |
Side lights | 10 Units, each2 x 20W Philips lamps, Total 400W | ||
Illumination | 1000LUX | ||
Controlling system | Switched control panel | Spraying & baking switch, lighting switch, emergency stop, breakdown alarm, failure alarm, pressure gauge |
Q: What is your MOQ?
A: All the products can be mixed in one container with low MOQ 1pcs.
Q: What is the Lead Time?
A: Normally it needs 20-25 days.
Q: What is the Payment Terms?
A: T/T/ 30% deposit before production and 70% before delivery.