5W CREE Mine Headlamp
China 5W CREE Mine Headlamp, Find details about China Mine Headlamp, Mine Head Light from 5W CREE Mine Headlamp
Basic Info.
Model NO.
KL6M
Emitting Color
White
LED Chips Brand
CREE
Certification
CCC, CE, EMC
Trademark
RaysEye
Transport Package
Color Box
Specification
rechargeable
Origin
China
HS Code
85131090
Model NO.
KL6M
Emitting Color
White
LED Chips Brand
CREE
Certification
CCC, CE, EMC
Trademark
RaysEye
Transport Package
Color Box
Specification
rechargeable
Origin
China
HS Code
85131090
Product Desciption
Structure
1. This series lamp is portable, the lamp head and battery part are connected by cable's upper
cover to be a whole miner's lamp. Lamp head could be fixed on cap lamp.
2. A LED main light source is installed in, KL5LM(A), several LED auxiliary light sources.
Clockwise turn on switch, main source and auxiliary sources illuminate alternatively.
3. This battery case is designed with closed wear-ring, convenient for carrying.
4. This lamp head is designed with charging device, matching with charging set, convenient
and reliable for charging.
5. PTC self-protection is set between battery group, and reusable short circuit protective
device is set on cable's battery end. Thus, this is very safe and reliable.
Technical Parameter
FORM1
Usage and maintenance
1. The battery is charged with more than 1/4 power when shipped out of factory, turn on the
switch to make sure it can illuminate normally. If it was in good condition, charge and use it.
Follow the charging set user manual, connect to power supply, plug lamp head into charging
socket, clockwise turn 180 degree to make charging points contact well, watch whether the
indicator is normal. It will take 10 hours to be charged fully.
2. Charge with matched charging set or unit charger.
3. Please turn off lamp when charging.
4. If any damage happened in using, give it to check department after leaving mine well, and
maintain by professional person with special tool, don't open lamp yourself, especially under
mine.
5. Don't over discharge lamp, use it in stipulated time, otherwise, battery's capacity and life
of service would be reduced.
6. If lamp head happened short circuit in maintenance or other operation, disposal the faulty,
and restart the lamp, it will work normally.
7. If the lamp was not used usually, please charge per three months in storage period.
8. Don't acutely knock or collide lamp in carrying or using, to avoid damage to any parts to
affect normal warning.
1. This series lamp is portable, the lamp head and battery part are connected by cable's upper
cover to be a whole miner's lamp. Lamp head could be fixed on cap lamp.
2. A LED main light source is installed in, KL5LM(A), several LED auxiliary light sources.
Clockwise turn on switch, main source and auxiliary sources illuminate alternatively.
3. This battery case is designed with closed wear-ring, convenient for carrying.
4. This lamp head is designed with charging device, matching with charging set, convenient
and reliable for charging.
5. PTC self-protection is set between battery group, and reusable short circuit protective
device is set on cable's battery end. Thus, this is very safe and reliable.
Technical Parameter
FORM1
| No. | Rated capacity (Ah) | Rated voltage (V) | Lighting time | LED main light source parameter | Life of service | Valid storage period | Weight (g) | |||
| Voltage (V) | Current (A) | Luminance(lx) | ||||||||
| Lighting start | Lighting 16h | |||||||||
| 1 | 5 | 3.6 | ≥20 | 3.6 | 0.3 | 4500 | 4200 | 600 | half a year | 660 |
1. The battery is charged with more than 1/4 power when shipped out of factory, turn on the
switch to make sure it can illuminate normally. If it was in good condition, charge and use it.
Follow the charging set user manual, connect to power supply, plug lamp head into charging
socket, clockwise turn 180 degree to make charging points contact well, watch whether the
indicator is normal. It will take 10 hours to be charged fully.
2. Charge with matched charging set or unit charger.
3. Please turn off lamp when charging.
4. If any damage happened in using, give it to check department after leaving mine well, and
maintain by professional person with special tool, don't open lamp yourself, especially under
mine.
5. Don't over discharge lamp, use it in stipulated time, otherwise, battery's capacity and life
of service would be reduced.
6. If lamp head happened short circuit in maintenance or other operation, disposal the faulty,
and restart the lamp, it will work normally.
7. If the lamp was not used usually, please charge per three months in storage period.
8. Don't acutely knock or collide lamp in carrying or using, to avoid damage to any parts to
affect normal warning.
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine