AE Series Planetary Gearbox additionally adds front and rear oil seals, uses the output shaft double support structure and design of helix gear, which makes the gear meshing  smoother and stable, the AE Series can be used in various control transmission fields with servo motors. The backlash of the AE series is less than five arc.min and the reduction ratio covers 3~100.

The Product Advantages of Planetary Gearbox:

1.Flexible structure design, in line with various working conditions.
2.Ring gear processing technology: Using internal gear slotting machine and hobbling machine; the precision of ring gear after processing can reach GB7.
3.Hardened gear secondary scraping technology: secondary high-speed dry cutting of gear eliminates gear deformation caused by heat treatment. Gear accuracy can reach GB6.
4.Reliable backlash testing.

How To Read
90    AE    10    (  )     (S) - 400   T1
 a       b      c      d        e       f       g

*Maximum radial force and maximum axial force, when the output is 100rpm, it acts on the center position (L/2) of the output shaft.

Dimensions (mm):

Compact output shaft mechanism

It adopts the design of output shaft integrated system, compact structure, high rigidity, and it can withstand large impact. Place the input coupling and the sun gear at the center of the output shaft to improve the concentricity of the components, thereby effectively controlling the gear clearance and improving the backlash of the whole gearbox.
 

Full needle structure

The inner bearing of the planetary gear adopts a full-needle design, the inner hole is made by a grinding process, the surface hardness is HRC60, and the cylindricity is less than 0.003mm.
 

Please follow the tips bellow to assemble the servo motor and reducer. Except for specified products, there are various dimensions of servo motors, some motors may not be able to connect with flanges.Therefore, be sure to use the proper motor which is specified when place your order.

In Case Of Assembling A Motor Without Key

1.Take off the rubber cap, turn the input shaft, and match the head of the bolt to the hole of the rubber cap. Make sure that the fixing bolt is loosened.

2.Gradually put the motor shaft into the input shaft (Ensure that it is smoothly put in without jam.). Be careful not to be inserted with the motor tilted.

3.Attach the motor to the reducer and fasten the bolt with designated fastening torque. See Table 1.

4.Fasten the fixing bolt of the input shaft with designated fastening torque wrench, etc. See Table 2.

5.Put on the rubber cap.
 

1.Maintenance time & Warranty: 1 year after leaving factory 
2.Other service: Including modeling selection guide, installation guide, and problem shooting guide, etc.

Q: What're your main products?
A: We currently produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, High Precision Planetary Gearbox and Precision Cycloidal Gearbox etc.. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor or gearbox?
A:If you have motor pictures or drawings to show us, or you have detailed specifications, such as, voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors or gearboxes?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but some kind of  molds are necessory to be developped which may need exact cost and design charging. 

Q: What's your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.