Technical Data Of Hydraulic Hose Crimper Machine KM-91C-6 (Computer Type) Crimp range: | 1/8"-2" 4SP |
Standard voltage&motor: | 380V/4kW |
Optional voltage&motor | 220V/2.2kW |
Capacity Of Oil Pump | 14.5L/min |
Hydraulc Oil | Winter: YB-N32; Summer: YB-N46 |
Volume Of Oil Tank | 70L |
Opening without dies | φ124mm |
Opening | ≥28mm |
No.of standard die | 10 sets |
Systematic Pressure | 30Mpa |
Standard Die Size Of Hydraulic Hose Crimper Machine KM-91C-6Standard Dies of KM-91C-6 |
No. | Die No. | Die Bore(D) | Die Length(L) |
1 | Φ6 | 15mm | 65mm |
2 | Φ8 | 18mm | 65mm |
3 | Φ10 | 20mm | 65mm |
4 | Φ13 | 23mm | 65mm |
5 | Φ16 | 26mm | 65mm |
6 | Φ19 | 29mm | 65mm |
7 | Φ25 | 37mm | 65mm |
8 | Φ32 | 46mm | 78mm |
9 | Φ38 | 51mm | 78mm |
10 | Φ51 | 63mm | 78mm |
Advantages Of Hydraulic Hose Crimper Machine KM-91C-6 : 1).Microcomputer control, accuracy and reliability;
2).Cromp capacity can be precisely controlled, repeat precision of 0.01mm;
3).Back reseting hydro-cylinder, can be easily operated;
4).Increasing the opening, and good passing performance;
5).Added with base-protective resin gasket to not damage the working surface;
6).Function: manual, semi-automatic and automatic;
7).Big swaging force, can easily crimp 2 inch 6 wires hose.
Applications Of Hydraulic Hose Crimping Machine KM-91C-6: 1).Suitable for high precision pressing of low and high pressure hose diameter, starting from 1/8 inch to 2 inch internal hose pipe.
2).Used rubber hose to transmit hydraulic pressure as there working power.
3).Used in Building Construction, Petroleum Industry, Chemical Industry, Car and motor Industry.
Hydraulic hose crimping machine why not choose kangmai ? 1. kangmai hose crimping machine
CE& ISO PATENT Approved and SGS Audited.
2. The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason like below:
(a)The machine head process by CNC machine,roundness and taper is within 0.1mm.
(b)The machine die base and dies adopt special die steel and process by advanced craft, the hardness is above 55 HRC. The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, 4SP even 6SP.
(c) The technical of machine head is forging or casting. Casting is cheap but has small hole on machine head. The piston will divide from casting machine head.